P08351: Automated Oiling System Matt Zapotoski Project Manager Sharif Hdairis Computer Engineer Bob Shackelford Mechanical Engineer Joe Jennings Mechanical Engineer Sponsored by:

Itinerary 10:30-10:35 Overview of Project 10:35-10:40 Product Design 10:40-10:45 Current State of Design 10:45-10:50 Risk Assessment 10:50-10:55  SD II Schedule 10:55-11:00 Questions

Project Description Machine to automate the oiling of tool holders Market: Parlec Key high level customer needs / engineering specs: Product versatility will handle Cat 30, 40, and 50s with diameters up to 7 inches up to 40 lbs Meet throughput variable speed oiling (300-60) parts per hour. Will not damage part surface Maintains 60 millionths of an inch Efficient, consistent coverage Complete exterior of part oiled

System Architecture

Design Concept

Current State of Design Design meets all desired customer needs Design meets all engineering specs for fully integrated system and subsystems On target to meet project budget Schedule: Final drawings with specs complete 1 week behind on mechanical system design BOM will be completed by 2/29 Mitigations: Long lead time for conveyor(3-4 weeks)  order over break

Revisions

Risk Assessment Schedule Oil becoming trapped inside top of part Mitigation: altering pin design as required Removal of excess oil stage Mitigation: testing different layouts, ordering more if required Maintaining cleanliness of oil in tub Mitigation: plug in the oil tub, oil filters, rubber flaps Lack of experience with power electronics. Mitigation: consult as much as possible with professionals, and increase testing/debug timeframe.

SD II Project Deliverables Test plan development and custom part design Ordering materials and parts Assembly of the machine Testing Documentation Project write up and CDR

Questions?