FIRELEC Migration Solution Don't let wiring costs prevent you from upgrading an ABB « Fischer and Porter System 6 » to a DeltaVTM system This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC

I/O Board (IOB) to be removed FMS-DCI6-DV-1 Fischer and Porter System 6 > DeltaV Using ADP-ITB (Migration Adapters) I/O Board (IOB) to be removed New DeltaV System ITB and cable to be kept The ITB Migration Adapters (ADP-ITB) allow to connect easily, existing Fischer and Porter System 6 FTAs to DeltaV I/O cards keeping in place : the existing I/O panels (ITBs) the existing associated I/O cables the existing loop power supplies connected on the FTAs No impact on the field wiring No need for loop check This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC

Existing architecture FMS-DCI6-DV-1 Existing architecture Existing 19 inches rack, IOBs, power supplies and communication cards to be removed ITBs and I/O cables stay in place in the existing cabinets Process I/Os stay in place in the existing cable trays CNRTL & I/O Rack 19 inches Height : 10U Existing cable tray 19 inches, Height : 1U Process I/Os Existing ITBs (DI,DO) Existing ITBs (AI,AO) This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC

New architecture for A.loop or P.loop replacement FMS-DCI6-DV-1 New architecture for A.loop or P.loop replacement ITBs and I/O cables stay in place in the existing cabinets Process I/Os stay in place in the existing cable trays 2 x BC11007 with ADPs Rack 19 inches Height : 2 x 3U = 6U Upper connector Process I/Os Existing ITBs (DI,DO) Existing ITBs (AI,AO) Existing cable tray 19 inches, Height : 1U Lower connector This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC

New architecture for D.loop or D.Output replacement FMS-DCI6-DV-1 New architecture for D.loop or D.Output replacement ITBs and I/O cables stay in place in the existing cabinets Process I/Os stay in place in the existing cable trays 2 x BC11007 with ADPs Rack 19 inches Height : 2 x 3U = 6U Upper connector Process I/Os Existing ITBs (DI,DO) Existing cable tray 19 inches, Height : 1U Lower connector This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC

New architecture for A.Input or A.Output replacement FMS-DCI6-DV-1 New architecture for A.Input or A.Output replacement ITBs and I/O cables stay in place in the existing cabinets Process I/Os stay in place in the existing cable trays 2 x BC11007 with ADPs Rack 19 inches Height : 2 x 3U = 6U Upper connector Process I/Os Existing ITBs (AI,AO) Existing cable tray 19 inches, Height : 1U Lower connector This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC

New DeltaV architecture FMS-DCI6-DV-1 New DeltaV architecture Secondary DeltaV Area Control Network Cntrl PS I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 I/O7 I/O8 Primary DeltaV Area Control Network I/O9 I/10 I/11 I/12 I/13 I/14 I/15 I/16 The new DeltaV controllers and I/O cards (M or S series) are installed The new FIRELEC I/O cables are installed between ADP-ITBs and new DeltaV I/O cards (M or S series) AI AO DI DO The I/O files BC11007 are installed in place of the existing Fischer and Porter System 6 Files where the IOBs were previously installed Existing ITBs (DI,DO) Existing ITBs (AI,AO) The ADP-ITBs are installed in the new files BC11007 This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC

FMS-DCI6-DV-1 Compatibility table IOB (Input/Output Board) : The board which is to be removed FTA (Field Termination Assembly) : The I/O panel where the I/Os are connected, and which is kept Firelec Adapter : The migration adapter to be installed in BC11007 (new I/O file) to perform I/O migration and process signal spliting toward the DeltaV system I/O cards. This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC

FMS-DCI6-DV-1 Advantages The main advantages of the FMS-DCI6-DV-1 (ADP-ITBs) for Fischer and Porter System 6 migration are as follow : Existing I/O cables are just disconnected from the Fischer and Porter System 6 I/O boards and reconnected to the ADP-ITBs keeping in place the FTAs and associated I/O cables The existing loop drawings are kept without any modification, allowing all maintenance processes and procedures to remain unchanged. This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC

For more information and support : FMS-DCI6-DV-1 Contacts For more information and support : Roel C.Mulder Director System Migration & Modernization Europe E-mail : Roel.Mulder@Emerson.com Phone : +31(0)70 413 67 18 Wilfrid DUPAS Sales Director E-mail : wilfrid.dupas@firelec.com Phone : +33 (0)470 590 550 This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC