TH series Distributors Standard Features Flat Back and Full Round 45-60 degree slope 4 plus discharges Locking inner spout Removable inner spout Removable inlet stub Opening slide: Custom Metal Fabricators TH series distributors

Flat back or Full round

45 degree 60 degree Intermediate slopes available on request

Any number of discharges on full round or flat back

Inner spout drops into discharge stub and locator ring when correctly aligned

Inner spout can be disassembled and taken out through the access door

Removable inlet stub can be replaced when it becomes worn

Distributors come standard with the customers choice of Cable control or Pipe control

Optional Features Painted or Galvanized Finish Stainless Steel Construction Custom sized discharge stubs Special lining of stubs and/or inner spout Cone bottom Power Select electric drive unit

Custom sized discharge stubs Finish Enamel paint Hot dip galvanize after welding is completed Material Carbon Steel is standard Stainless Steel is optional any available alloy Custom sized discharge stubs Discharge stubs can be tube size or pipe size They can be sized up or down compared to the inlet size

Lining options Several material and thickness options are available Urethane/Kryptane AR Ceramic tile UHMW Please inquire if you require lining materials not listed

Cone bottom The cone bottom can be used to redirect dust or overflow material back to the leg or a storage bin. The discharge elbow can be rotated 360 degrees.

Power Select drive The Power Select drive is a computer controlled hydraulic unit that bolts directly to the bottom of any CMF distributor. The Power Select maintains the up and down action of the inner spout requiring a positive lock in the discharge stub before the ready signal is given on the operator station. Full round models incorporate logic to pick the shortest route of travel to the selected discharge. The Power Select may be factory installed on new units or retrofit in the field to existing units.