Identification of Toner / Drum Cartridges for the Oki MPS710C Printer 11/9/2018 OKIDATA Americas This publication contains proprietary and confidential information and is intended for internal use only. Unauthorized use of this information is prohibited.
the existing Image drum in the printer take the following steps: In the event that you receive a toner cartridge for the MPS710C that does not fit onto the existing Image drum in the printer take the following steps: Verify that it is the correct color and that the packaging is labeled for the MPS710C. Verify that the part number on the packaging matches the part number for the MPS710C printer. Follow the procedure outlined on the next page to install the toner into the printer. BLACK TONER - VERIFY THIS P/N 43866144- KIT: TYPE C16 TONER BLACK (MPS710C) CYAN TONER - VERIFY THIS P/N 43866146 - KIT: TYPE C16 TONER CYAN (MPS710C) MAGENTA TONER - VERIFY THIS P/N 43866142- KIT: TYPE C16 TONER MAGENTA (MPS710C) YELLOW TONER -VERIFY THIS P/N 43866141 - KIT: TYPE C16 TONER YELLOW (MPS710C) 11/9/2018 OKIDATA Americas This publication contains proprietary and confidential information and is intended for internal use only. Unauthorized use of this information is prohibited.
Magenta Toner Cartridge YELLOW Toner Cartridge Procedure To Follow To Modify the Toner Cartridge NOTE: This assumes the toner is keyed wrong or the drum may be keyed wrong Using a pair of needle nose plyers remove the black plastic pin depicted in the red circles. It is the second pin from the top. Identifies Magenta Toner Cartridge Identifies Black Toner Cartridge Identifies Cyan Toner Cartridge Identifies Yellow Toner Cartridge BLACK TONER Cartridge Magenta Toner Cartridge NOTE: Starter Toners Do NOT have pins. CYAN Toner Cartridge YELLOW Toner Cartridge
Drum Cartridge Identification by Key The picture to the right is the correct pinout of an MPS710 drum (all colors) Image DRUM 3. REMOVE THIS PIN. Long term solution – if the drum looks like the picture to the right (all pins to the left), remove the pin circled and outlined in red. Once this is done, all replacement toners will fit correctly into this drum unit. MPS710C 11/9/2018 OKIDATA Americas This publication contains proprietary and confidential information and is intended for internal use only. Unauthorized use of this information is prohibited.