EVERLINE® LED Emergency Drivers Greg Bennorth Director, Product Management

Overview Family of 4 Emergency LED Driver SKUs What’s an Emergency LED Driver? It is a battery back-up driver that is connected in parallel with an existing driver within a fixture The Emergency drivers contain a NiCad battery that is continually having a charge maintained When power goes out, the Emergency Driver cuts in and provides power to the LED modules for up to 90 minutes Fixtures will operate at lower lumen levels when in the emergency mode Who Buys Emergency Drivers? OEMs, where projects require emergency lighting up to 1 in 10 fixtures have one installed Our OEM targets will be small and mid-tier customers that purchase EVERLINE drivers Distributors for MRO and sometimes as an add on for new installations EM Driver Ratings Output Power This is the output power supplied in emergency mode Output current will vary based on the load voltage Lumen output can be calculated based on the output power Output Voltage Range The output voltage range must cover the range of the connected load UL Listed Listing allows for field installation California Title 20 Compliant Meets Battery charger requirements for California

Emergency Drivers Product Overview ELD10UNVL: 10W LED Emergency driver Features: Integrated NiCad battery Lead wire only 90 minute illumination time Harness included for wiring Test switch and charging light included Applications: Output voltage range of 10-50Vdc Targeted for linear fixtures  ELD10UNVLPL: 10W LED Emergency driver (Low Profile version) Low profile (1.18” h x 1.18” w) Output voltage range of 15-52Vdc Targeted for architectural fixtures

Emergency Drivers Product Overview ELD7UNVCL: 7W LED Emergency driver Features: Integrated NiCad battery Flexible conduit 90 minute illumination time One harness goes to the driver and modules Second harness goes to test switch for remote mounting Remote mounted due to downlight application Test switch and charging light included Applications: Output voltage range of 15-50Vdc Targeted for downlight applications ELD20UNVL: 20W LED Emergency driver Conduit harness contains all the leads Typically remote mounted due to size Output voltage range of 20-50Vdc Targeted for high bay applications

Product Notes Inventory in L80 (to begin) Ordering Code Catalog # Power Voltage Connection Luminaire Applications Notes Master Carton Qty ELD10UNVL000I ELD10UNVL 10W 120-277V Leads General Linear   10 ELD10UNVLPL000I ELD10UNVLPL Architectural Low Profile Low Profile ELD7UNVCL000I ELD7UNVCL 7W Conduit Leads Downlights 6 ELD20UNVL000I ELD20UNVL 20W High Bay Inventory in L80 (to begin) Individual Packs in Master Cartons Parts Kit included Additional faceplate for 7W Product Available to order now. Inventory by the end of the month.

Wiring Connection Notes Line Side Connections One Connection to un-switched branch for monitoring Separate connection to switched power Converter Connector Must be connected to link in the batteries Disconnected during shipment Output Load Connect total output load Do not connect just one module in multi module fixture Test Switch – Indicator Light Dual function component To be tested monthly per NFPA code w/ LED Driver w/ Step-Dimming Driver For Emergency Mode Only (no Driver)

Product Labels I-Pack Label Master Carton Label I-Packs within *Carton label will have extra bar codes not relevant for Universal

Marketing Support Email to internal sales (OEM & DIST RSMs): February 5th Formal launch eblast (OEM & DIST Agents & Customers): Early March Press Release on website: Early March Social Media announcements: Early March Collateral PDFs currently available on www.unvlt.com: Product Flyer Installation Instructions Spec sheets To support adoption of the Emergency Drivers, these tactics (among others) will be in play… Training Presentation posted to Presentation Library Emergency Drivers Application Guide – to be added LED Selector Guide – to be updated Retrofit Solutions Guide – Emergency Drivers Spec Sheet to be added to booklet Blueprint Newsletter (print & eblast) IMARK & AD email notification to members Incorporation into ongoing marketing/sales programs If additional support is required in your local market, please contact Heather DeWire at hdewire@unvlt.com.

Snap this QR Code and quickly access our website. Thank you Snap this QR Code and quickly access our website. Website: www.unvlt.com Nashville Customer Service: (800) 862-8666 Universal Technical Engineering Services: (800)-225-5278