Copyright © 2018 W.S. Darley and Company. All Rights Reserved. DigiTrol™+ Panel Kubota Mechanical Diesel Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-M1705 Main Panel Actuator Kubota Mechanical Engines (12VDC Battery) System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: High Engine Temperature (Default = Alarm/Shutdown) Low Oil Pressure (Default = Alarm/Shutdown) Over Speed (Default = Off) Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay) Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided C Series Display & Control MVP-M1105 Remote Panel Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON 70-0774-CAP Terminating Cap Page 1 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

Copyright © 2018 W.S. Darley and Company. All Rights Reserved. DigiTrol™+ Panel Kubota Mechanical Diesel Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-M1705 Main Panel Actuator Kubota Mechanical Engines (12VDC Battery) 70-0774-CAP Terminating Cap System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: High Engine Temperature (Default = Alarm/Shutdown) Low Oil Pressure (Default = Alarm/Shutdown) Over Speed (Default = Off) Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay) Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided SINGLE PANEL INSTALLATION C Series Display & Control Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON Page 2 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

Diesel DOC/DPF Engines DigiTrol™+ Panel Kubota J1939 DOC/DPF Diesel Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-A1706 Main Panel Kubota J1939 Diesel DOC/DPF Engines D180337T4-15040 (12VDC Battery) System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: All Kubota J1939 ECU Alarms & Shutdowns Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided C Series Display & Control MVP-A1106 Remote Panel Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON 70-0774-CAP Terminating Cap Page 3 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

Diesel DOC/DPF Engines DigiTrol™+ Panel Kubota J1939 DOC/DPF Diesel Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-A1706 Main Panel Kubota J1939 Diesel DOC/DPF Engines D180337T4-15040 (12VDC Battery) 70-0774-CAP Terminating Cap System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: All Kubota J1939 ECU Alarms & Shutdowns Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided SINGLE PANEL INSTALLATION C Series Display & Control Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON Page 4 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

Diesel DOC Only Engines DigiTrol™+ Panel Kubota J1939 DOC Only Diesel Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-A1707 Main Panel Kubota J1939 Diesel DOC Only Engines D1803TI49T4-15041 V2403TI65T4-15042 V3800TI74T4-15043 (12VDC Battery) System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: All Kubota J1939 ECU Alarms & Shutdowns Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided C Series Display & Control MVP-A1107 Remote Panel Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON 70-0774-CAP Terminating Cap Page 5 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

Diesel DOC Only Engines DigiTrol™+ Panel Kubota J1939 DOC Only Diesel Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-A1707 Main Panel Kubota J1939 Diesel DOC Only Engines D1803T9T4-15041 V2403TI65T4-15042 V3800TI74T4-15043 (12VDC Battery) 70-0774-CAP Terminating Cap System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: All Kubota J1939 ECU Alarms & Shutdowns Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided SINGLE PANEL INSTALLATION C Series Display & Control Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON Page 6 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

Diesel DEF/SCR Engines DigiTrol™+ Panel Kubota J1939 DEF/SCR Diesel Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-A1708 Main Panel Kubota J1939 Diesel DEF/SCR Engines D3800TI114T4-15044 (12VDC Battery) System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: All Kubota J1939 ECU Alarms & Shutdowns Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided C Series Display & Control MVP-A1108 Remote Panel Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON 70-0774-CAP Terminating Cap Page 7 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

Diesel DEF/SCR Engines DigiTrol™+ Panel Kubota J1939 DEF/SCR Diesel Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-A1708 Main Panel Kubota J1939 Diesel DEF/SCR Engines D3800TI114T4-15044 (12VDC Battery) 70-0774-CAP Terminating Cap System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: All Kubota J1939 ECU Alarms & Shutdowns Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided SINGLE PANEL INSTALLATION C Series Display & Control Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON Page 8 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

Copyright © 2018 W.S. Darley and Company. All Rights Reserved. DigiTrol™+ Panel Kubota J1939 Gas Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-A1709 Main Panel Kubota J1939 Gas Engines WG1605G-15045 WG2503G-15046 WG3800G-15047 (12VDC Battery) System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: All Kubota J1939 ECU Alarms & Shutdowns Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided C Series Display & Control MVP-A1109 Remote Panel Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON 70-0774-CAP Terminating Cap Page 9 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.

Copyright © 2018 W.S. Darley and Company. All Rights Reserved. DigiTrol™+ Panel Kubota J1939 Gas Engines Pressure Transducer 0 to 500 psi 4-20mA MVP-A1709 Main Panel Kubota J1939 Gas Engines WG1605G-15045 WG2503G-15046 WG3800G-15047 (12VDC Battery) 70-0774-CAP Terminating Cap System Operation With system power ON: Push button engine start/stop from either station (10 second pre-heat period) Throttle increase/decrease from either station Pressure maintain throttle switch (Select PSI and speed adjusts to maintain) Shutdown override switch for run to fail operation MVP Display/Controller (Metric/English Selectable) Engine Temperature ▪ Battery Voltage Engine Speed ▪ Fuel Level % Oil Pressure ▪ Engine Hours Engine Protections for: All Kubota J1939 ECU Alarms & Shutdowns Fuel Level (Default = Off) Alarm Log records alarms with engine hour stamp. MSG Pressure Gauge (Metric/English Selectable) Displays pressure (PSI/BAR) Low Pump Water Pressure Shutdown (shut down at 15 psi, 10 second start up delay Panel Materials Anodized aluminum plate (.09” thickness both panels) Panel Color (Gray metallic background with black lettering) Panel dimensions (8.5”H x 7.375”W) Panel dimensions (7.375”Hx 8.5”W) Metalphoto graphics and coating (for superior performance and scratch resistance) Mounting hardware not provided SINGLE PANEL INSTALLATION C Series Display & Control Notes: All components and connectors are water tight Modular panel system with custom extension harnesses available for plug and play installation and servicing 10 ft. and 20 ft. extension harnesses available Red OLED displays Momentary “push to start/push to stop” with over crank protection Green lamp for panel power indication (not engine run) 15 amp circuit breaker pre-installed for easy access 5 second glow plug sequence when panel is powered ON Page 10 of 10 Copyright © 2018 W.S. Darley and Company. All Rights Reserved.