Product Training Module CKP-Series | SAE J1939 CAN Keypad

Product highlights SAE J1939 CAN 2.0b Protocol IP69 Front Panel Sealing Protection Install Inside or Outside Cab Low Profile Design Installs Vertically or Horizontally Up to 3 LED Function Lights per Button Standard or Custom Laser Etched Legends Diagnostic Feedback 1,000,000+ Button Actuation Cycles Low Current Switching 8 to 32V Operating Voltage Tactile and Audible Feedback

TYPICAL APPLICATIONS NAICS & SIC Codes Military NAICS SIC Military Armored Vehicle, Tank, and Tank Components 336992 3795 Guided Missile and Space Vehicle Manufacturing 336414 3761 On/Off Highway Equipment Heavy Duty Truck Manufacturing 336120 3711 Construction Machinery Manufacturing 333120 3531 Farm Machinery & Equipment Manufacturing 333111 3523 Mining Machinery & Equipment Manufacturing 333131 3532 Motor Home Manufacturing 336213 3716 All Other Transportation Equipment 336999 3799

Product design features

Product design features

Product Advantages Compared to Electromechanical 1,000,000+ Actuation Cycles Reduced Wire Harnessing Diagnostics Feedback in Case of Failure Easy Installation Built in Connector Mates to the Deutsch DT-Series Connector

Specification highlights* Electrical Designed for 12/24 volt systems Minimum 8 VDC Maximum 32VDC Low current sleep mode draws less than 1.5mA throughout the supply voltage range. Wakes on keypress or CAN message. The keypad passes SAE J1455 section 4.13.1 for power up, operating voltage, over voltage, reverse polarity and short circuit Software CAN 2.0b type interface as defined by SAE J13939 Environmental -40˚C to +85˚C operating temperature IP69 front panel sealing protection IP68 when connected (back side) Chemical, corrosion & weather resistant * See datasheet for complete details

EMC Specifications* Transient Immunity ISO 11452-2, 100 V/m, 20 MHz to 2,000 MHz, Class A per ISO 11451-1 Conducted Transient Immunity ISO 7637-2:2004, Annex A Table A2 (for 24V systems), Class A EDS Immunity ISO 10605:2001, Test level IV (8 kV direct discharge, 15 kV air discharge) Transient Emission ISO 13766, Broadband: Annex D, Narrow band: Annex E, 30-1000 MHz * See datasheet for complete details

Software SAE Standards » SAE J1939 Explained » What is J1939? J1939 is a higher level protocol based on Control Area Network (CAN). It covers the design and use of devices that transmit electronic signals and control information among vehicle components. Used as an application layer, J1939 provides communication between the engine control, transmission control, vehicle body control, and other applicable sub-control systems. To learn more, click on the following links. SAE Standards » SAE J1939 Explained »

J1939 Interface Specification » Software integration J1939 Interface J1939 Interface Specification » Please refer to the J1939 Interface Specification document for additional details on: Overview and Switch Status LED Function Light Status Diagnostic Reporting Common CAN Messages Sleep Mode

Dimensional Specifications in. [mm]

Configuring a sample/part STEP 1 First, configure base of the keypad including orientation & function light color.

Configuring a sample/part STEP 1 Continued| ORIENTATION OPTIONS

Configuring a sample/part STEP 2 Second, configure how the 3 light codes per button will function from options 1-8 and choose the laser etched icon for each of the 12 buttons. The black dots, as shown in options 1-8, are representative of which position will be laser etched to reveal the lights on the PC Board.

ADDITIONAL INFORMATION Country of origin: Mexico International Harmonization Code: 8536.50 ECC: EAR99 Lead Time: 12 Weeks Packaging: 24 pieces/box

ADDITIONAL INFORMATION Download Datasheet » J1939 Interface Specification » Download CAD Files » Manual Change Source Address » Request Quote or Sample » Contact Us »

Product video Click the Play Button to Watch