The Leader in Customized Site Furnishings

Our Commitment Provide High Quality, Long Lasting Products that will hold up against all of the elements Constantly Improving Manufacturing Process to Provide you with more Affordable Site Furniture We Guarantee our Site Furniture to be free from defects in workmanship and materials for a period of three full years

Other Outdoor Receptacles Overlapping Material and Partial Welds – Leave uncoated surfaces that promote rusting and corrosion in the first few months of use.

Premier Site Furniture Receptacles One Piece Laser Cut Design, Fully Welded – Makes one continuous piece of metal that is impervious to rust and corrosion.

Receptacles

Other Outdoor Benches Picture Taken 1 year after install Made from thinner metal causes sagging in the middle Not Fully Welded Notice the paint peeling and the rust spots on the concrete Made with Carbon Steel Feet Premier Site Furniture lost this bid because our price was a little higher. The Buyers neglected quality and purchased solely on price.

Premier Site Furniture Benches Complimentary Custom Laser Cut Logos One Piece Laser Cut Design Fully Welded Joints Stainless Steel Feet to eliminate Rusting Super Durable TGIC Powder Coating Will Not Sag – Made from ¼ Cold Rolled Steel

Benches

Other Picnic Table Manufactures

Premier Site Furniture Picnic Tables

Picnic Tables Contd Solid Metal Design Seats 8 comfortably Inground or Surface Mount

Bike Racks and Planter Boxes

Superior Powder Coating The secret to our long lasting, durable and professional looking products is our one piece laser cut design combined with our powder coating processes. Powder Coating Process – Sandblast to SSPC-SP 5/NACE White Finish Cleans surface of all impurities Creates a textured surface that provides better adhesion of the powder coat

Superior Powder Coating Contd Powder Coating Process Continued – Epoxy Primed Makes our product impervious to corrosion and rust Improves salt spray test results by 1000 hours plus Improves color and sheen retention – Powder Coated with Super Durable TGIC polyester top coat The most durable coating on the market Resists chalking, weathering and retains color and gloss

AAMA Test Procedures and Performance Requirements Test Requirements Compliance Salt-Spray Resistance: 3,000 hours per ASTM B 117Yes Weathering: Color Retention, 5-year south Florida sun, per ASTM D 2244 with a maximum 5deltaE changeYes Weathering: Chalk Resistance, 5-year south Florida sun, per ASTM D 4214 with a max rating of 8Yes Weathering: Gloss Retention, 5-year south Florida sun, per ASTM D 523 with a min loss of 30%Yes Weathering: Resistance to Erosion, 5-year south Florida sun, with less than 10% film lossYes Chemical Resistance: Muriatic Acid, Mortar, Nitric Acid, Detergent and Window CleanerYes Dry Film Hardness: per ASTM D 3363 with no ruptureYes Adhesion: Dry Adhesion, Wet Adhesion and Boiling Water Adhesion using the cross hatch method with 0% failureYes