Global Air Sampler Systems Options for Global Air Sampler Systems Rev.: November 10, 2016

Global Air Sampler Options Meteorological Station Electrical Surge Protection Devices Ruggedized Cellular Phone Data Interface System GASdaq Data Acquisition PC Software 5. Integration of a Second F&J Digital Sampler

Meteorological Station Global Air Sampler Systems WS-110   Measured Parameters Accuracy Wind Speed ± 2 knots Wind Direction < 4° per second average error Temperature ± 1.1°C Humidity ± 5% R.H. Barometric Pressure ± 2 mbar

Meteorological Station Global Air Sampler Systems WS-110 LOW VOLUME System HIGH VOLUME System

Electrical Surge Protection REMP Air Sampling Systems For REMP Air Sampling Systems FJ-SSI-AS-02 Dimensions: 7.3”L × 4.8”W × 2.5”H Weight: 1.97 lbs. (.90 kg) Receptacles: Two (2) 125VAC, 15A standard USA female grounding receptacles powered by one standard USA male plug Test Standard: IEEE Std C62.41.2TM– 2002 and IEEE Std C62.62TM—2010

Electrical Surge Protection High Volume Air Sampling Systems For High Volume Air Sampling Systems FJ-SSI-02E-UK FJ-SS-HLASE Dimensions: 8”L × 8”W × 4.4”H (20.3 x 20.3 x 11.2 cm) Weight: 5.8 lbs. (2.6 kg) Receptacles: Two (2) 250VAC, 13A United Kingdom (UK) style grounding receptacles. This unit can be factory installed in the HV/LV air sampler at the time of fabrication or retro fitted to older air samplers with only minor changes. Test Standard: IEEE Std C62.41.2TM– 2002 and IEEE Std C62.62TM—2010

Ruggedized Cellular Phone Data Interface System For F&J Global Air Sampler Systems Ruggedized Cell Phone System Features Network Operation: CDMA, GSM or Wi-Fi Email server settings SMTP Server SMPT Port Sender Email Address Sender Password SMS Text Settings Operator Selectable Engineering Units Flow: SCFM, SLPM, SCCM, sm3/hr, Sm3/m Temperature: °C, °F Pressure: Atm, InHg, mmHg, bar, kPa, mbar, or hPa Operator Selectable E mail Frequency: 10 seconds to 12 hours Operating Tempeture: -30°C to 60°C (-22°F to 140°F) Operating Humidity: 95%; non-condensing Certification: MIL-STD-810G

Data Concentrator Specifications Power supply: 9V DC, minimum 800Ma Power connector: Barrel connector jack, 2.0mm ID, 5.5mm OD, center positive Power protection: Reverse polarity protected Instrument connections: Up to 4 bidirectional RS-232 (RX, TX, GND) RS-232 connectors: 9 position D-Sub male (DB9M) Phone connection: USB 2.0 (host/OTG) USB capability: Data and charge USB connector: Micro USB Mating USB cable: Micro-A OTG (must use supplied red cable, regular USB cable will not work) Power indicator: Red LED Operation indicator: Yellow LED (phone is connected and application is running) Processor: 16 bit embedded flash microcontroller Operating temperature: -25°C to +65°C Panel size: 3.0" x 3.9" Main Screen Main Screen 

Data Acquisition Software Program Description Global Air Sampler Data Acquisition Software Program Description “GASdaq” Standard Air Sampling Mode User Settings Screen  

Data Acquisition Software Program Description “GASdaq” Standard Air Sampling Mode Main Screen during Operation  

Data Acquisition Software Program Description “GASdaq” Standard Air Sampling Mode Main Screen after Termination of the Sample Event  

Data Acquisition Software Program Description “GASdaq” Standard Air Sampling Mode Management Report for GASdaq in Standard Air Sampling Mode  

Data Acquisition Software Program Description “GASdaq” Standard Air Sampling Mode Management Report Chart  

Data Acquisition Software Program Description “GASdaq” Standard Air Sampling Mode Data Records Table in Standard Air Sampling Mode  

Data Acquisition Software Program Description “GASdaq” Standard Air Sampling Mode Alarms Settings in Standard Air Sampling Mode   Operator selectable alarms are available for: Flow deviation High inlet pressure Low inlet pressure High temperature Low temperature Inlet pressure drop due to dust loading

Data Acquisition Software Program Description “GASdaq” Standard Air Sampling Mode Data Chart  

Data Acquisition Software Program Description “GASdaq” Standard Air Sampling Mode Data Chart with Alarm Event  

Data Acquisition Software Program Description “GASdaq” Second Air Sampler Integration (DFM Mode)   Main Screen in DFM Mode (Measurement in process)  

Data Acquisition Software Program Description “GASdaq” Second Air Sampler Integration (DFM Mode)   Termination Screen Data Record Table DFM Mode  

Data Acquisition Software Program Description “GASdaq” Second Air Sampler Integration (DFM Mode)   Data Charts in DFM Mode   Additional Field for DFM Mode Option  

Data Acquisition Software Program Description “GASdaq” Weather Station Mode Main Screen in Weather Station Mode (Measurement in process)  

Data Acquisition Software Program Description “GASdaq” Weather Station Mode Alarm Settings Screen  

Data Acquisition Software Program Description “GASdaq” Weather Station Mode Data Records in Weather Station Mode   Data Charts in Weather Station Mode