Second Grade Curriculum Chat Welcome! To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File. Second Grade Curriculum Chat Liberty Pines Academy September 6, 2016

Curriculum Chat Agenda Welcome 2nd Grade Assessments Florida Standards Overview Examples of Rigor Second Grade LPA Non-Negotiables Classroom Management AVID F.O.C.U.S. Homework M.O.V.E. Edmodo and Communication Questions As our time is limited, use index card at your table to jot down questions as they come up. Please leave cards on table and I will respond within the next day or two. To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

2nd Grades Assessments BAS Reading Level Discovery Education Reading Quarter 1 Quarter 2 Quarter 3 Quarter 4 BAS Reading Level Discovery Education Reading Discovery Education Math ELA- 2 Phonics/ 2 Language/ 4 Comprehension Math- 4 Science- 4 open book Social Studies- 4 open book Art, PE Music Combined To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File. District School 2nd Grade

Florida Standards Instruction Instruction is standards based. Assessments are standards based. County has designed curriculum maps for us to follow based on the Florida Standards. Year-at-a-Glance Pacing Guide | St. Johns County School District To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Florida Standards Instruction Higher order thinking (analyzing, synthesizing and evaluating) Make informed decisions and judgments and defend/justify their understanding/thinking Integration of content areas Authentic and real world learning opportunities Collaborative work To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Reading/English Language Arts Our Focus Reading/English Language Arts Students will be: doing more independent reading. involved in more classroom discussions about text. writing in the content areas. asked to justify answers orally and with written evidence from the text. writing with Being A Writer reading with Being a Reader To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

learn to think deeply and develop a problem solving orientation. Our Focus Math Students will: learn to think deeply and develop a problem solving orientation. learn to be active listeners, thoughtful peers, and accurate responders. become flexible with their understanding, written expression, and use of mathematics. learn to embrace mistakes as opportunities to learn. To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Social Studies and Science Our Focus Social Studies and Science Students will: be using Science and Social Studies informational text as part of their Reading instruction. cite specific evidence from text when supporting answers. To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

construct viable arguments when problem solving. Our Focus Physical Education Students will: connect subject matter from other courses during physical activity lessons. construct viable arguments when problem solving. To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

understand domain specific vocabulary. Our Focus Art/ Music Students will: be expected to read information text/instructions in arts domain and present evidence of understanding. engage in collaborative discussions about artistic domain with intent of presenting, debating and defending ideas. understand domain specific vocabulary. To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Examples of Rigor in Reading Question: Describe the purpose of the illustration. Use details from the illustration and text to support your answer. Answer: The purpose of this illustration is to show how much Maya loves Julius because she is smiling as she is running through the flowers with him. It also shows how Maya’s parents don’t like Julius because they are frowning in the picture watching them have fun. To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Example of Rigor in Math Sam has 5 dimes, 2 nickels and 3 pennies. Frank has 1 quarter, 3 dimes, and 2 pennies. Who has more money? How much more? How do you know? Show your work and explain your thinking. Answer: Sam = 10¢, 20¢, 30¢, 40¢, 50¢, 55¢, 60¢, 61¢, 62¢, 63¢ Frank = 25¢, 35¢, 45¢, 55¢, 56¢, 57¢ Sam has more money because 6 tens is more than 5 tens. 63¢ - 57¢ = 6¢ Sam has 6¢ more. 10 ₵ 10 ₵ 10 ₵ 10 ₵ 10 ₵ 5 ₵ 5 ₵ 1 ₵ 1 ₵ 1 ₵ 25 ₵ 10 ₵ 10 ₵ 10 ₵ 1 ₵ 1 ₵ To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

LPA’s Non-Negotiables All sentences begin with a capital letter. All sentences end with punctuation. All sentences are complete sentences. All sentences have proper subject verb agreement. Students will use all resources to spell words correctly. To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Classroom Management Character Counts! Pillars School Rules =3 R’s *Responsible * Respectful * Ready to Learn Character Counts! Pillars *Citizenship *Caring *Trustworthiness *Fairness *Respect *Responsibility To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Students start here every day Behavior Clip Chart (Used in all K-3 classrooms) Outstanding Great Job Good Day Ready to Learn Think About It Teacher’s Choice Parent Contact Students start here every day To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

AVID To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Focus on Comprehension Understanding and Support F.O.C.U.S Block Focus on Comprehension Understanding and Support . 7th year at LPA Students in grades K-5 participate Goal is to provide students instruction in non-fiction informational text Students learn non-fiction reading skills Students work in whole group and small groups Students learn to read and better understand non-fiction texts Students may or may not receive instruction from their own teacher To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Homework Opportunity for meaningful practice Approximately 20 min. Math Literacy Journal- Reading/Writing/Spelling To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

M.O.V.E. Managed Organized Varied Exercise (Teacher Led PE) To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File. Managed Organized Varied Exercise

Student & Parent Communication 2nd Grade Website Teacher Emails To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Together, we are partners in education Together, we are partners in education. We look forward to working with you and your child! To reproduce the balloon on this slide, do the following: Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Rotation box, enter 133⁰. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. Select the first stop in the slider, and then do the following: In the Position box, enter 13%. Select the next stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Width box, enter 1.2”. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert.   On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.