Professor Stear Spring 2017 Second Start ENGR 1201 Professor Stear Spring 2017 Second Start

ENGR 1201 Licensure as a professional engineer (PE) Elements of Engineering Analysis Attendance

Licensure as a professional engineer (PE) ENGR 1201 Licensure as a professional engineer (PE) Education Examination Experience Documentation

Engineering Licensure - Education

Engineering Licensure - Exam

Engineering Licensure - Experience

Engineering Licensure – Documenting Experience

Elements of Engineering Analysis ENGR 1201 Elements of Engineering Analysis Engineering Graphics Unit Analysis Problem Solving Spreadsheets

ENGR 1201 Engineering Graphics CADD/3D Printing Sketching Lettering Scales Orthographic Projection

Computer-aided Drafting and Design ENGR 1201 CADD Computer-aided Drafting and Design https://www.youtube.com/watch?v=ap-YDhhT6Xs

3D Printing ENGR 1201 Additive Manufacturing Rapid Prototyping Manufacturing of the Future https://www.youtube.com/watch?v=WzmCnzA7hnE

Sketching

Lettering

Scales

Orthographic Projection

The Glass Box One way to understand the standard arrangement of views on the sheet of paper is to envision a glass box. If planes of projection were placed parallel to each principal face of the object, they would form a box.

Unfolding the Glass Box To organize the views of a 3D object on a flat sheet of paper, imagine the six planes of the glass box being unfolded to lie flat. Note the six standard views (front, rear, top, bottom, right side, left side).

The Glass Box Unfolded Lines extend around the glass box from one view to another on the planes of projection. These are the projectors from a point in one view to the same point in another view.

Transferring Depth Dimensions The depth dimensions in the top and side views must correspond point-for-point. When using CAD or instruments, transfer these distances accurately. You may find it convenient to use a 45° miter line to project dimensions between top and side views. You can transfer dimensions between the top and side views either with dividers or with a scale.

ENGR 1201 – Unit Analysis

ENGR 1201 – Unit Analysis

ENGR 1201 – Problem Solving Need – Know – How - Solve

ENGR 1201 – Spreadsheets

Homework wk of 2/24 Handouts Chap 2 exercises ENGR 1201 Scales Sketching Ortho Lettering Chap 2 exercises 8,10,14, 16,17,21, 30,32,42