Professional Wi-Fi Installation Solutions Bree Murphy, RCDD National Training, Applications Engineer bam@oberoninc.com 412-328-5710

Oberon Company Overview Oberon and Cisco Partnership “Application Specific” WiFi Mounting Solutions

Oberon is a family owned business Oberon is a family owned business. The world HQ is located in beautiful State College, PA WAP mounting products are manufactured and stocked in New Kensington, PA We started the company providing Wireless Site Surveys, and quickly realized the need for unique and effective AP mounting options. Many of the designs are the result of customer input and suggestions. Oberon’s products are designed and tested by an experienced technical staff with extensive wireless networking survey, design, and installation experience. Oberon's products are also tested by Cisco Wireless teams.

Oberon products are used to support challenging areas within all verticals Simplify future moves, adds and changes Oberon’s products have helped thousands of Cisco customers to achieve secure, convenient and aesthetic professional WiFi Installations. WiFi is quickly becoming the “second” utility in many verticals. Oberon's wireless mounting options are used where the RF coverage, infrastructure security, environmental robustness, and aesthetics are paramount in the network design and implementation. With the WiFi standards quickly evolving to faster speeds, and need for more bandwidth, APs upgrades are inevitable. Oberon provides product to simplify removing and replacing APs.

The only specialized WiFi mounting manufacturer in the Cisco Solutions Partner Program All products are tested by experienced Cisco and Oberon engineers We are both the Recognized product category leader Largest variety of solutions for all verticals We utilize the design and hardware of the Cisco WAPs to make Installation easy and quick.    Oberon is a recognized product category leader. We are a Registered Cisco Technology Partner and an Aruba Networks Ecosystem Partner We are the ONLY specialized manufacture of wireless access point mounting solutions in the Cisco Solutions Partner Program.   

Oberon WAP Mounting Solutions Paint; Acrylic, or Polane T Polyurethane Enamel All Products Are: Virtually transparent to the signal Paintable Compliant with NEC codes and UL where applicable

Oberon solves unique challenges of WAP deployments Hot Spots Stadiums Basketball Arenas/ Gymnasiums Hospitality/ Airports/ Service Dorms Healthcare Auditoriums

After Before Before Model 1077-CCOAP Helps Healthcare simplify ICRA compliance codes with back box - Back box serves as an effective DUST BARRIER Eliminates the need to poke holes in the ceiling tile Interchangeable doors permit simple migration to new access points and antennas

Hard Ceiling Options Before Simplifies deployment in hard ceilings Trims can be exchanged with AP upgrades Has enough room for equipment cord slack Back box helps simplify ICRA compliance codes Before After Model 1042-CCOAP-Old constr Model 1043-CCOAP-New constr

Hard Wall Options – Right Angle Brackets For those who want to mount the AP in the preferred horizontal position Today, patch cord installation into the WAP is becoming a huge conversation, predominantly when mounting WAPs on the wall. The reason behind this, when the WAPs are placed directly over TO or electrical boxes, or perhaps the horizontal is coming in through a hole in the wall, customers must find an easy way to terminate the horizontal cable, along with attaching an equipment cord, maintain the bend radius, and provide enough room for cord slack, while concealing all of this. This is a real tight fit. To make matters more complicated, TSB recommends Cat 6a cable for all wireless installations due to the fast evolving technologies that are requiring higher bandwidth. Well 10gig Cat 6a cords have a larger diameter. With a larger diameter, the allowed bend radius, is smaller. TIA specifies that the patch cord bend radius be only 4x the cables’ diameter. So with slack in patch cords, it is clear that mounting options for the WAPs must have sufficient room for the placement of the patch cord. I just want to note, that many manufactures have a smaller diameter patch cord, which makes it a lot Easier for WAP connections, however, due to smaller gage size (28awg,) channel links have to be de-rated. That’s a whole another topic, and should be discussed with your cable manufacturer. Some manufactures also have very short patch cords, like 6 to 8”. This will all depend on the cabling manufacturer that your customer uses. Oberon has taken great consideration of these issues, and we can provide solutions that solve this issue. Model 1011 Model 1006-CCOAP Model 1012 Wall mounted WAPs are generally mounted directly over the TO, E-box, or raceway Maintaining proper bend radius, cord slack, and concealing the cable is quickly becoming priority for aesthetics

Hard Wall Options cont – More flush to the wall Model 0900-00 Has large enough cut-outs for equipment cords, and cable, preserving bend radius Can be mounted directly over TO, or electrical box Has enough room for equipment cord slack

Wall/Ceiling mount non-metallic lock boxes to physically protect APs Compact, non-metallic enclosure secures and protects WAPs in residence halls, hotels, retail locations and other indoor venues. This rugged ABS plastic enclosure is virtually transparent to wireless signals so WAPs with integrated antennas or small detachable antennas may be protected. The box can be mounted directly over the telecommunication outlet, and cable raceway or conduit can be conveniently terminated. Model 1015-00 Model 1016-00 Wall/Ceiling mount non-metallic lock boxes to physically protect APs Can mount directly over TO, to raceway, or ceiling conduit

Solutions for Cisco 2800/3800 Series 802.11ac Wave 2 – Feature packed New form factor- Heavier and larger Cisco does not recommend the AIR-BRACKET-3 Cisco recommends Oberon in their Deployment guide for physical installation Protected, secure, and an aesthetic professional appearance “If you have this bracket currently installed and are migrating to the newer AP 2800 and AP 3800 series, you may be able to still use the existing tile and leverage the new in-tile mount available from Oberon Wireless (a Cisco partner).” Cisco released their 3800 WAP, with the 802.11 Wave 2 standard technology. This is a heavy unit. According to the spec sheet, it weighs 4.6 lbs. Cisco Installation documentation specifies Oberon as the mounting alternative to the AIR-BRACKET-3. 2800 3800 Access Point Physical Hardware and Mounting Options

Cisco 2800/3800 Series cont… Recessed Ceiling Mount Kits – Trim Piece Before Cisco 2800/3800 Series cont… Recessed Ceiling Mount Kits – Trim Piece After Flush to the ceiling Trim piece is interchangeable Quick deployment Stable, secure, and aesthetic professional appearance Easy cable installation Cisco just released their 3800 WAP, with the 802.11 Wave 2 standard technology. This is a heavy unit. According to the spec sheet, it weighs 4.6 lbs. Cisco Installation documentation specifies Oberon as the mounting alternative to the AIR-BRACKET-3. 1) Model 1040-CCOAP3800 (Use your own tile) 2) Model 1044-CCOAP3800 (Replaces the 2x2 tile)

Cisco 2800/3800 Series cont… Ceiling Tile Enclosure – Lockable Door Before Cisco 2800/3800 Series cont… Ceiling Tile Enclosure – Lockable Door Flush to the ceiling AP mounts in the door Interchangeable doors for easy migration Quick deployment Stable, secure, and aesthetic professional appearance Helps satisfy Hospital ICRA compliance Back box creates a dust barrier Seals off Plenum space No holes in the ceiling tile Model 1047-CCOAP3800 (Replaces the 2x2 tile)

Cisco 2800/3800 Series cont… Beam Mount/Open Ceilings and Hard Wall Paintable vanity cover Paintable vanity cover Paintable vanity cover Paintable vanity cover Model 1006-CCOAP-3800 Model 1006-CCOAP-3800 Model 1008-AP3800-COVER Model 1006-CCOAP-3800 Model 1006-CCOAP3800

Hard Wall/Hard Ceiling Mount Dorm Rooms/Hotels Hard Wall/Hard Ceiling Mount Compact wall or ceiling mount box to physically protect WAPs Transparent to the wireless signal Can mount directly over TO, to raceway Deep enough for a biscuit jack, and patch cord Tamper resistant screws for security Many compact WAPs fasten to a telecommunications outlet low on the wall, vulnerable to tampering, disconnect, or accidental damage. This compact, non-metallic plastic box protects the WAP and cables connected to it. Deep enough to surface mount WAPs with a biscuit jack, and preserve the patch cord bend radius. The low-profile 1017 is molded from durable ABS plastic, and is transparent to the wireless signal. Box cover has tamper-resistant screws. Comes in white or black. Model 1017 Non-metallic box Model 1017 Non-metallic box Cisco 1810W

Basketball Arenas/Gyms Hard wall/ceiling - Impact resistant Physically protects APs Lock boxes (1015-00, 1024) Impact resistant, NEMA 4 Low profile (1015, 1020) Mounts directly over TO, Electrical box, raceway Model 1020 Model 1015-00 Could also use lock boxes in dorm rooms. Model 1024

Open Ceilings Where Ceiling/Wall Mount is Not Possible Low profile hinged box Knockouts on 2 sidewalls Standards compliant termination of cable inside of box Model 0900-HC

Parking Garages WiFi Garage card readers are quickly emerging NEMA 4 rated protection, low profile box Weather, Temperature, Tampering, Impact resistance This model comes with a right angle bracket WiFi card readers in parking garages are quickly emerging. Model 1020-RAB

High Ceiling Venues High Ceiling Venues Mount WAPs in open ceilings with this convenient beam clamp. Quickly install WAP in preferred horizontal orientation. Includes two beam clamps and a paintable, plastic vanity cover which is virtually transparent to wireless signal. Conduit, raceways, and cable can be terminated in the bracket to for a clean appearance. The access point can be locked in place using the WAP manufacturer’s locking features. includes features for mounting Cisco AIR-BRACKET directly to the right angle bracket Model 1008-WAP-COVER Model 1008-AP3800-COVER Model 1008-AP3800-COVER Open ceilings, convenient beam clamp, with paintable vanity cover Rapid deployment, keeping the AP in the preferred horizontal position Locked in place with Cisco’s AP locking features Includes features for mounting Cisco’s AIR-BRACKET Open ceilings, convenient beam clamp, with paintable vanity cover Rapid deployment, keeping the AP in the preferred horizontal position Locked in place with Cisco’s AP locking features Includes features for mounting Cisco’s AIR-BRACKET

Customize the appearance of CISCO HLA (Hyper Location Antenna) APs Transparent to the wireless signal Paintable Oberon’s 33-HLA-COVER  customizes the appearance of the popular Cisco Hyper Location Antenna (HLA) and WAPs. The vanity cover is made from a wireless signal transparent plastic, and can be attached directly to the Cisco enterprise WAPs. The 33-HLA-COVER is paintable so you can customize the color of the antenna and WAP to partially conceal the WAP or compliment interior color schemes. Coloring the vanity cover does not void the manufacturer’s warranty. Includes cover fasteners. Model 33-HLA-COVER

High Ceiling Venues cont… Model 1010 Model 1011 Auditoriums Right angle brackets 2 Axis articulating bracket for patch Antenna – for signal pattern control Under balconies Model 1013 – 2 Axis Model 3010 – NEMA 4

Economical 2’ x 2’ locking ceiling tile enclosure Model 1047-LPDOME Universal Enclosure, Non-metallic dome The 1047 intended to replace the older models, 1052, and 1064. Locking, 2' x 2' suspended ceiling tile enclosure, mounts and secures wireless access point with non-detachable or internal antennas. This steel enclosure replaces a standard ceiling tile, and its larger back-box is suitable for larger access points and antennas. The interchangeable door simplifies access point and antenna changes. Access points can be mounted in the door or inside the enclosure with the configurations with the dome. Economical 2’ x 2’ locking ceiling tile enclosure Attractive, textured, powder-coat finish matches most ceilings Back box is an effective dust barrier, Healthcare ICRA codes simplified

Rugged enclosure to resemble a light fixture Fits most Cisco WAPs NEMA 4 capability with gasket in the cover Deep enough for a biscuit jack, and patch cord Aesthetic and economical, Oberon’s Model 1018 is a rugged enclosure designed to protect most vendors’ wireless access points in many environments.  The 1018 is injection molded  with UV-stabilized polycarbonate, and includes a captured gasket in the cover to provide a NEMA 4 capability for outdoor installations. The screw-on, white polycarbonate cover is virtually transparent to wireless signals. Internal bracket is designed to simplify access point installation. Model 1018-WH Wall mount Polycarbonate

Model 3010 NEMA 4 Enclosure New. The Model 3010 protects WAPs mounted beneath seats in high density WiFi deployments in public venues. The 3010 is large enough for most enterprise WAPs, yet is compact enough to fit under the seat without impeding foot space. This unit is comprised of a thermoformed, durable Thermoform plastic cover, aluminum back plane and gasket. The plastic can be easily drilled for cable egress, and when properly sealed providing a NEMA4 capability. As always, transparent to wireless signals, and paintable. Protects the AP from weather, pressure spray, spilled liquids Impact resistant, UV stabilized Comes with a pivoting T-Bar inside the box Fits under seats, up in the corner under balconies or on steps that the public doesn’t access. Model 3010

Physically protects from challenging environments Fits most Cisco WAPs This compact NEMA 4 enclosures are designed specifically to protect WAPs in challenging environments. This rugged polycarbonate enclosure protects the WAP from weather, pressure spray, spilling liquids, dust, and impacts. It is transparent to wireless signal. Very high ceilings in Auditoriums, stadiums, and large classrooms, have the potential to create interference. Also it may not be possible to mount the APs in the ceiling. So an alternative is to mount APs underneath seating to achieve the density required. Or mount the Aps on the wall with a right angle bracket. Model 1020 Compact NEMA 4 enclosure for under seat WAP mount Model 1020-RAB w/Right Angle Bracket for wall mount Physically protects from challenging environments Fits most Cisco WAPs Auditoriums, stadiums, large classrooms

Physically protects AP and antenna Model 3020 New Hand rail model 3020. Available upon request. Clam shell Acrylic/PVC alloy plastic enclosure designed to protect wireless access point and antenna when mounted on handrails in auditorium or stadium. Center plane fastens to handrail. Capable of NEMA 3R performance for indoor/outdoor environments when properly sealed. Physically protects AP and antenna Clam shell acrylic/PVC alloy plastic NEMA 3R capable Available upon request

Vanity cover for Cisco IW3700 UV capped for exposure to direct sunlight This is an indoor/outdoor cover and mounting solution for Cisco’s Industrial Wireless 3700. This is a paintable Gray Acrylic/PVC Alloy plastic vanity cover; UV capped for exposure to direct sunlight Model 33-IW3700-COVER

Hot Spots cont… Higher Education and Cisco Model 1024-C Compact NEMA 4 Model 1020-RAB w/Pole Mount Kit Model 1024-C Compact NEMA 4 Model 1020-00 Rugged polycarbonate enclosure protects the WAP from weather Impact resistant UV stabilized NEMA 1, 2, 4, 4X, 12, 13 Virtually transparent to the signal

Hot Spots cont… In Design phase Model 3030 Outdoor or indoor hot spots Secures the WAP in the top Large enough for AP & external antenna UV stabilized Height is optional In Design phase Model 3030

Thank you for participating.