Revitalization of AIT, CONS and DRA programs Albert Graham, Parviz Entekhabi, R. Burton Ward, and Zahi Atallah

Statement of problems Low enrollments Programs not in line with industry needs Curriculum deficient in Career and workforce development Pedagogical attainment Employment trends changes

Labor market information US Bureau of Labor Statistics (US DOL) CA Economic Development Department County of Monterey Economic Development Support of advisory committees

Solutions Revamping programs Revise content to better fit industry needs Update technology content Reduce number of miscellaneous courses Delete non-critical courses Focus on core courses Streamline course sequencing to enable completion in 2 years Offer transfer and career opportunities

Construction Management, Architecture and CADD Integrates construction management and architecture technologies Construction Management Architecture and CADD Emphasis on communication and management technologies in construction Sustainability retained but as a core component of programs Provides single-track career ladders from entry level positions to management and even transfer

Construction Management AS in CAD with Emphasis on Construction Management Create a nationally accredited professional AS (American Council for Construction Education ACCE) Establish a CSU transfer program Provide the required education for the state contractors license exam Coursework prepares for exam 1.5 years of experience toward the 4-year requirement

Basic skills acquisition Job readiness Incumbent worker training Workforce development and advancement Development of leadership and technology skills to enhance productivity and employment opportunities

Year 1 Fall Spring Units Course Units Course CMAC-50 1 Introduction to Construction & Architecture*** CMAC -51 3 Construction Graphics CMAC -60 Construction Materials & Sustainability CMAC -61 4 Construction Methods: Foundations-Framing MFGT-169 Haz Mat & Industy Safety MFGT-180 Industrial Workplace Skills Spring Units Course CMAC -52 3 Introduction to AutoCad CMAC -62 Construction Methods: Exterior & Interior Finish CMAC -53 CAD Sustainable Detailing CMAC -63 Concrete & Masonry Technology CMAC -66 Introduction to Heavy Construction

Year 2 Fall Spring Units Course Units Course CMAC -81 3 Construction Contracts & Specifications CMAC -82 Construction Commercial Transactions CMAC -64 Construction Electrical System Technology EGN-8 Statics Spring Units Course CMAC -83 3 Introduction to Construction Estimating CMAC -84 Principles of Construction Management & Controls CMAC -65 Plumbing & Mechanical System Technology CMAC -54 Building Information Modeling EGN-10 Surveying

Architecture AS in CMAC with Emphasis on Architecture Prepares students for entry-level architecture, interior design, landscape architecture Establish a CSU transfer program First-year architectural design courses already articulated with Cal Poly Preparing on latest architectural technology tools Designing projects in local community

Fall 2016 Spring 2017 Fall 2017 Spring 2018 Construction graphics {CMAC 51} Advanced AutoCAD {CMAC 54) Advanced Auto CAD {CMAC 54) Mechanical Drawing and Detailing {CMAC 58} Engineering Drawing {CMAC 55} Print Reading for Industry {CMAC 64} Introduction to Revit Architecture {CMAC 68} Introduction to Revit Architectural {CMAC 68} Architectural Design & Visual Communication I {CMAC 70} Architectural Design & Visual Communication II {CMAC 72} Architectural Design & Visual Communication III {CMAC 71}

Construction Management, Architecture and CADD  Course No.  Course Title Units CMAC-50 Introduction to Construction and Architecture 1.0 CMAC-52 Introduction to AutoCAD 3.0 CMAC-61 Construction Methods: Foundations - Framing 4.0 CMAC-62 Construction Methods: Finish- Exterior and Interior   SUBTOTAL UNITS (12.0) Course No. Course Title Units CMAC-63 Concrete & Masonry Technology 3.0 CMAC-64 Construction Electrical System Technology CMAC-65 Plumbing & Mechanical System Technology CMAC-66 Introduction to Heavy Construction CMAC-67 Building Information Modeling EGN-8 Statics EGN- 11 Plane Surveying   SUBTOTAL UNITS (6.0)

Construction Management Emphasis Course No. Course Title Units CMAC-51 Construction Graphics 3.0 CMAC-60 Construction Materials & Sustainability CMAC-81 Construction Law, Contracts, and Specifications CMAC-82 Commercial Construction Transaction Records CMAC-83 Introduction to Construction Estimating CMAC-84 Construction Management and Scheduling MFGT-169` Hazardous Material Industry Safety 1.0 MFGT-180 Industrial Workplace Skills   SUBTOTAL UNITS (20.0)

Architecture Emphasis Course No. Course Title Units CMAC-59 Computer-Aided Sustainable Detailing 3.0 CMAC-54 Advanced AutoCAD CMAC-68 Introduction to Revit Architecture (BIM) CMAC-70 Architectural Design and Visual Communication I CMAC-71 Architectural Design and Visual Communication II CMAC-72 Architectural Design and Visual Communication III   SUBTOTAL UNITS (18.0)

Manufacturing Technology AS Emphasis on skills and technologies used in the manufacturing industry Safety Fabrication Fluid power Electricity Mechanical design Workforce development for manufacturing industries High precision Critical thinking Leadership skills

Year 1 Year 2 Fall Spring Summer Course Units MFGT 169 1 MFGT 130 3 MFGT 178A 2 MFGT 75 MFGT 176A WLD 150 WLD 151 CMAC 64 CMAC 55 Total 12   Summer Course Units CWE99 3 Total Year 2 Fall Spring Course Units MFGT 180 1 MFGT 132 3 MFGT 131 MFGT 176C 2 MFGT 176B MFGT 178C MFGT 178B MFGT 71 CMAC 58   Total 11 10

✓ REQUIRED MAJOR COURSES: Emphasis: Construction Management Course No. Course Title Units   Required Major Course CMAC-55 Engineering Drawings with Solidworks 3.0 CMAC-64 Industrial Print Reading 2.0 MFGT-70 Introduction to Agriculture Mechanics MFGT-130 Introduction to Metal Fabrication MFGT-131 Intermediate Metal Fabrication MFGT-140 Introduction to Fluid power MFGT-150 Introduction to Industrial Electricity MFGT-169 Hazmat and Industrial Safety 1.0 MFGT-180 Industrial Workplace Skills WLD-150 Basic Welding WLD-151 Introduction to Tig Welding SUBTOTAL UNITS (=24.0) ✓ RESTRICTED MAJOR ELECTIVES (Select a minimum of 13.0 units from the following Course No. Course Title Units   Required Major Course CMAC -58 Computer - Aided Mechanical Drafting 3.0 MFGT-71 Agriculture and Industrial Equipment Operation MFGT-75 Agriculture Machinery and Management MFGT-99 Occupational Cooperative Work Experience Education MFGT-132 Advanced metal fabrication MFGT-141 Intermediate Fluid Power 2.0 Restricted Major Elective MFGT-142 Troubleshooting Fluid Power MFGT-151 Intermediate Industrial Electricity MFGT-152 PLC of Industrial Electricity SUBTOTAL UNITS (≥ 13.0)

Timeline Courses are currently being submitted to the curriculum committee All courses will be submitted by Fall 2016 Substantive change documents will be submitted in Spring 2017 Meetings with counselors to start Spring 2017 Start teaching in Fall 2017, pending CCCCO and ACCJC approvals

Personnel, facilities, equipment No need to hire any additional faculty Transfer R. Burton Ward to hard funds No need for new facilities Shops and labs existing No need for new equipment

Program promotion Hartnell counselors High school counselors Programs that are linked with careers Transfer to universities High wage Realistic expectations Focused programs High school counselors Articulations Clear pathways Link to jobs