Lesson 1 Your first project in 10 MINS ! Watch it on big screen while working with your mobile ! Official website: cubiio.muherz.com E-mail: support@muherz.com Quser group: https://goo.gl/486Rdb

1 2 3 Before Starting ※ Get your mobile phone ready. Get started! Please check the user manual in the box, and read all contents of instructions. Check out the latest product details and updates on our official website. http://cubiio.muherz.com/tw Follow and share! Facebook page https://www.facebook.com/cubiio.tw Quser group https://goo.gl/486Rdb 1 2 3 ※ Get your mobile phone ready. Get started!

Let’s Get Started STEP1 STEP2 STEP3 Setup App Installation and Operation Get your project done. STEP3 FAQ 3

STEP 1 Setup 1-0 Check contents Note: The microSD card has been preloaded files and mounts on the CUBIIO SUIT(1.).

STEP 1 Setup 1-2 Put the given sample paper on the base and then put the CUBIIO SUIT right on the base. 1-1 Plug in the power cord and the USB cable.

STEP 1 Setup 1-3 Turn the main power on. “-”means ON. “o”means OFF. 1-4 Touch and hold down the power key until the notification light turns on.

STEP 2 App Installation and Operation iOS on the left side Android on the right side iOS Android 2-0 Keep your mobile phone within a 50-cm radius from cubiio. 2-1 Make sure that your mobile phone is connected to the Internet. 2-2 Make sure turning on location sharing.  2-3 Access the Bluetooth function of your mobile device. DO NOT pair cubiio. * All listed above are absolutely required, and there will be further explanations in the end of the video.

Download cubiio remote app by QR codes. iOS Android 2-4 Download cubiio remote app by QR codes.

iOS Android 2-5 First sign in, pleas register an “admin’s e-mail address” and set up a “safety code.” Make sure that you have read and agreed all contents of safety regulations. * If you don’t receive a verification e-mail within 1 minute, please re-check the following: The verification mail could be categorized as spam. The e-mail address you provide is not correct.

Go to the main menu and select Draw something/Sketch mode. iOS Android 2-6 Go to the main menu and select Draw something/Sketch mode. Note: The other two modes will be covered in the future lessons.

iOS Android 2-7 A Icons: A. Filename Bar B. Undo and Redo C. Clear Canvas D. One-click Zoom *Each unit is a 1 by 1 square measured in centimeter, and the canvas has a total 10 by 10 square centimeters working space. B D C B C D A

iOS Android Please sketch the heart in the central area. 2-8 Once finish your drawing, tap the bar above to name your file (e.g., 123), and then tap . 2-8 Once finish your drawing, tap the bar below to name your file (e.g., 123), and then tap Done. 2-9 The Preview function will be explained in Lesson 3. 2-9 OK, Send to cubiio

Power is set at 70%; speed is set at 100% iOS Android 2-10 Power is set at 70%; speed is set at 100% Note Higher power/slower speed → darker color and thick strokes Lower power/faster speed → lighter color and thinner strokes

2-11 Enter 6-character safety code, and press Done. iOS Android 2-11 Enter 6-character safety code, and press Done. 2-12 The preview function will be explained in Lesson 3. 2-13 Start. 2-11 Enter 6-character safety code, and press OK.

Done! iOS Android 14

STEP 3 FAQ Check out our website for more information regards to troubleshooting. Q1: Besides the Sketch mode, are there other picture sources I can upload to my Cubiio? A1: The Cubiio has 3 alternative input sources: 1. Choose a file: Select a picture file from Micro SD card storage. 2. Choose a photo: Select a picture from your mobile storage. 3. Sketch: Draw your own pattern for Cubiio to engrave. Q2. What file formats does Cubiio support? A2. Cubiio supports uncompressed BMP files with extension .bmp and text g-code files with extension .txt, corresponding to bitmaps and vector graphics respectively. For details of vector graphics, please see our instructions of G-code generating on the official website. Q3. How to set proper values of power and speed? A3. Qusers have shared many reference values based on various materials; however, we strongly recommend that users test with spare materials before engraving important items. Q4. Why do Android phones need to turn on location service? A4. On Android system, location service is required for Bluetooth BLE to work properly. Please search “android ble location permission ” for details.

STEP 3 FAQ Check out our website for more information regards to troubleshooting. Q5.Why is there no mark left on my target material when there is laser beam emitted on my target. A5:First, make sure that the material you use is engravable, such as wood, leather, paper, cloth, and so on. Some white papers cannot absorb laser energy because of the high reflectivity of plasma coating of the paper surface; therefore user can try to use colored paper. Second, please keep cubiio at a distance of 15-16cm from the target so that it can focus properly; otherwise it will not work. Q6. Pop-up notification shows the cubiio Shield can’t be detected. A6. Please check and tighten the two black positioning pins on the bottom plate before test again. To engrave without cubiio Shield, please turn on Expert Mode, which you can find in the main menu setting at top-right corner of the screen. Q7. My phone is unable to find my cubiio!! A7. Both iOS and Android system need to turn on Bluetooth, and Android must additionally allow "location permission" (location or GPS). In addition, a cubiio can only connect one mobile phone. To connect another mobile phone, please turn off the cubiio completely for 3 seconds before restarting.

You have finished Lesson 1 Please continue to Lesson 2. Hurray! You have finished Lesson 1 Please continue to Lesson 2. 17