Construction Inspection and Quality Control Module 28207-05

1. Describe industry standards for quality control. Transparency 1 Objectives 1. Describe industry standards for quality control. 2. Describe how to build masonry sample panels and prisms. 3. Perform a slump test. 4. Describe and perform field inspections.

Transparency 2 Performance Task 1. Perform a slump test.

Transparency 3 Table 1 – Grade Requirements for Brick

Transparency 4 Figure 2 – Sample CMU Panel

Transparency 5 Figure 3 – CMU and Concrete Brick Test Prisms

Transparency 6 Figure 4 – Compressive Prism Test

Transparency 7 Figure 6 – Grout Prism Molds of CMUs

Transparency 8 Figure 7 – Impact Test

Transparency 9 Figure 8 – Third-Point Flexural Strength Test

Transparency 10 Figure 12 – Diagonal Tensile Shear Test

Transparency 11 Table 2 – Recommended Sand Gradation Limits

Transparency 12 Figure 14 – Siltation Test Jar

Transparency 13 Figure 15 – Colorimetric Test

Transparency 14 Figure 16 – Slump Test Comparison

Transparency 15 Figure 24 – Moisture Condition of Brick

Transparency 16 Table 3 – Allowable Tolerances for Mortar Joints

Transparency 17 Table 4 – Allowable Construction Tolerances

Transparency 18 Figure 26 – Hot Weather Construction Checklist

Transparency 19 Table 5 – Brick Masonry Construction in Hot Weather

Transparency 20 Figure 27 – Cold Weather Construction Checklist

Transparency 21 Table 6 – Brick Masonry Construction in Cold Weather