10/100Base-TX to 100Base-FX Redundant Media Converter FT-1105A FT-1205A Copyright © PLANET Technology Corporation. All rights reserved.

Presentation Outline

Presentation Outline Product Overview Product Benefits Product Features Application Available modules

Product Overview 10/100TX to 100FX Redundant Media Converter 3-port Media Converter Either 3-port switch mode or 2-port conversion with redundant mode 10/100 TX 100 FX FT-1105A Model FT-1105A FT-1205A Fiber Connector 1 x 100Base SFP 2 x 100Base SFP Copper 2 x 10/100Base-TX 1 x 10/100Base-TX Redundant Link Port-2 and Port-3 Port-1 and Port-2 FT-1205A

Product Overview Redundant Pair FT-1105A Front Panel 1-Port 100Base-FX Fiber Port 2-Port 10/100Base-TX Copper Port FT-1205A Front Panel 2-Port 100Base-FX Fiber Port 1-Port 10/100Base-TX Copper Port Redundant Pair

Product Overview FT-1105A / FT-1205A Rear Panel 1 x 5V/2A DC Jack 1 x 2-DIP switch

Product Benefits Hardware Fibers or copper links to automatically recover less then 10ms Not only a Media Converter, but also an Ethernet switch. Compact size work with MC-700/1000R/1500 family media chassis Prevent packet loss with backpressure (Half-Duplex) and 802.3 PAUSE frame flow control (Full-Duplex) Auto-MDI / MDI-X on Copper port Plug and play

Features FT-1105A Standard Interface Mechanical Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX IEEE 802.3x Full-Duplex Flow-Control, Back-Pressure in Half-Duplex eliminate packets loss Interface Dual 10/100Base-TX Copper, One 100Base-FX SFP Fiber optic Auto-Negotiation for 100Base-TX Half-Duplex or 100Base-Full-Duplex Supports Auto MDI/MDI-X function Supports Maximum frame size up to 2046Kbytes. Mechanical External 5V/2A DC power supply LED indicators for easy network diagnose DIP Switch for 3-Port operation with Fast Ethernet Switch mode or Redundant mode DIP switch for LBR (Loop Back Reply) on / off selection Compact size work with PLANET MC family Media Chassis ( MC-700/1000R/1500) EMI standards comply with FCC class A, CE class B 10/100 TX 100 FX 10/100 TX Switch mode 10/100 TX 100 FX < 10ms 10/100 TX Redundant mode

Features FT-1205A Standard Interface Mechanical Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX IEEE 802.3x Full-Duplex Flow-Control, Back-Pressure in Half-Duplex eliminate packets loss Interface Dual 100Base-FX SFP Fiber optic, One 10/100Base-TX Copper Auto-Negotiation for 100Base-TX Half-Duplex or 100Base-Full-Duplex Supports Auto MDI/MDI-X function Supports Maximum frame size up to 2046Kbytes. Mechanical External 5V/2A DC power supply LED indicators for easy network diagnose DIP Switch for 3-Port operation with Fast Ethernet Switch mode or Redundant mode DIP switch for LBR (Loop Back Reply) on / off selection Compact size work with PLANET MC family Media Chassis ( MC-700/1000R/1500) EMI standards comply with FCC class A, CE class B 10/100 TX 100 FX 100 FX Switch mode 10/100 TX 100 FX < 10ms 100 FX Redundant mode

Redundant Features Link status auto detect and redundant on Dual ports with same connector type. Only Primary-Port is active at a time, the Backup-Port is blocked. While Primary-Port link fail occur, the traffic swap to Backup-Port automatically. Once the Primary-Port status back to link up, the traffic swap from Backup-Port to Primary-Port. Hardware redundant swap less than 10 ms. 依照SFP模組可彈性的延伸距離,滿足不同的需求 結合Layer 2 switch 的功能,及Media Converter 的特性

Fiber-optic Networking for ISP, enterprise, and home Application Fiber-optic Networking for ISP, enterprise, and home The PLANET FT-1105A/1205A are 3-Port Redundant Media Converter which support conversion between 10/100Base-TX and 100Base-FX network. The difference with the other one-port channel media converter is the Redundant Media Converter is designed for critical networks that require fibers or copper links to automatically recover less then 10ms, such as ISPs, telecom, hospitals, banks and enterprises. With high performance data transmit and easy installation, the FT-1105A/1205A can building a ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building) for small office network environment from enterprise.

Fault Tolerant Redundant Link for critical network applications The FT-1105A and FT-1205A are designed for optical fiber networks that require rapid link redundancy. With the auto-recover less than 10ms, the two redundant media converters provides the rapid responded time required for critical applications.

Application – FT-1105A Copper Link Redundant 2 km Primary Link 100Base-TX Copper ( Forwarding) Fail 100Base-FX Fiber 2km Backup Link 100Base-TX Copper ( Standby)

Application – FT-1105A Switch Mode

Application – FT-1205A Fiber Link Redundant Primary Link 100Base-FX Fiber ( Forwarding) Broken Backup Link 100Base-FX Fiber ( Standby) 20 km

Application – FT-1205A Critical Network Service Primary Link 100Base-FX Fiber ( Forwarding) Copper 10/100Base-TX Backup Link 100Base-FX Fiber ( Standby)

Application – FT-1205A Switch Mode - Distance Extension MFB-F20 MFB-F20 100Base Fiber 20 km 100Base Fiber 20 km 40 km

Related products Standard Media Converter Chassis 10-inch (MC-700), 19-inch (MC-1000R, MC- 1500) rack-mountable, 2.4U high 7, 10, 15-Slot media converter chassis, with hot swappable slot Per-slot power isolation for hot-swap and per slot protection Redundant power (RPS-120W) with options for MC-1000R Sufficient power supply system Reduce the effort of converter maintenance and management Support PLANET FT and GT series media converters MC-1000R RPS-120W (Redundant Power Supply) MC-1500 MC-700

Available modules Related 100Base-FX SFP Transceiver modules MFB-FX SFP-Port 100Base-FX Transceiver (1310nm) -2km MFB-F20 SFP-Port 100Base-FX Transceiver (1310nm) – 20km MFB-FA20 SFP-Port 100Base-BX Transceiver (WDM,TX:1310nm) -20km MFB-FB20 SFP-Port 100Base-BX Transceiver (WDM,TX:1550nm) -20km