Luxe Plank Replacement Damaged Area

Luxe Plank Replacement Tools Needed: Hand roller / utility knife / spline tape (2 in every box)

Luxe Plank Replacement Use a sharp utility knife to score down through the joints (use multiple passes) on all four sides of the damaged plank. Cut completely through the rigid vinyl film backing on the plank.

Luxe Plank Replacement Remove Damaged Board

Luxe Plank Replacement Remove the exposed, L-shaped, bottom overlap film from the replacement plank. Trim it carefully along the edge of the plank. You can use the damaged board as a cutting pad. Damaged Board

Luxe Plank Replacement Turn the replacement plank face down and use the trimmed film to fill in the areas on the back of the plank that does not have film on it. This creates a uniform thickness on all 4 edges of the plank.

Luxe Plank Replacement How to cut Luxe Plank spline material to lengths: Remove the release film from the spline and insert it, adhesive side up, about 1” underneath the surrounding planks. Do not overlap the spline material surrounding the opening

Luxe Plank Replacement Area is ready to insert new board

Luxe Plank Replacement Insert replacement board

Luxe Plank Replacement Use hand roller on new board

Luxe Plank Replacement Finished repair New Plank