Topics: Arduino Target Package Arduino Part 4 Topics: Arduino Target Package

MathWorks Solutions(review) 1 Arduino IO Package: Used to perform analog and digital input and output as well as motor control from the MATLAB command line 2 Arduino Target: Used to compile and download Simulink® code directly to the Arduino board

Workshop Overview Getting started Hands-on Project 1: LED control Hands-on Project 2: LED dimmer

1 2 3 Getting started Install Matlab 2012a or later version In a MATLAB® Command Window, enter targetinstaller. 3 Choose to get the support package from the Internet or from a folder.

Getting started(cont.) 4 Select the Install check box for either Arduino® target, and click Next > 5 Click install ArduinoIO

Getting started(cont.) Click 7 Click simulink icon to launch simulink library browser. Library target for use with arduino hardware

Hands-on Project 1: LED blink Prepare your simulink block: Output to arduino led pin13

Hands-on Project 1: LED blink 2 Click tools > Run on Target Hardware > prepare to Run click

Hands-on Project 1: LED blink 3 Click OK click

Hands-on Project 1: LED blink 4 Click tools > Run on Target Hardware > Run click

Hands-on Project 1: LED blink 5 Make sure your model has been successfully downloaded to arduino and observe the onboard LED

Hands-on Project 2: LED dimmer 1 2 Hardware Simulink model R 1k Ohm R 220 Ohm

Hands-on Project 2: LED dimmer 3 Click tools > Run on Target Hardware > Run click

http://www.mathworks.com/har dware-support/arduino- matlab.html www.arduino.cc www.ladyada.net/learn/arduino www.EarthshineElectronics.com https://learn.sparkfun.com/ http://www.mathworks.com/har dware-support/arduino- matlab.html References