2N® Access Unit RFID (125kHz or 13.56MHz)

VERTICALS 2N® Access Unit RFID Office Residential Industry Education Government

Controller and RFID reader in one 2N® Access Unit RFID Controller and RFID reader in one combination of RFID reader and controller connected via UTP cable to a network low installation costs augmentation of additional modules 2N® Access Unit combines door controller and RFID card reader in one complex device connected via UTP cable to the network which significantly decrease the cost of installation labor. The unit can be augmented with additional modules (e.g. keypad, RFID reader, Bluetooth, Wiegand, etc.), which are appreciated in complicated installations.

Advanced event reporting 2N® Access Unit RFID Advanced event reporting network security HTTPS connection Certificates 802.1X protocol records downloaded via SysLog email to security guard To prevent criminals to gain an access to the wiring in order to compromise the device there is a tamper switch inside. It detects tampering attempts and triggers an alarm or sends an email to security guard. Network security is guaranteed by HTTPS connection, certificates and 802.1X protocol that protects the network against hackers.

Single cable installation 2N® Access Unit RFID Single cable installation easy installation: PoE power supply data periphery The access control unit can easily be got up and running by people without any installation experience. All without even having to go through intensive training or to pore over cryptic manuals. All accessories such as REX, magnetic door contact or electrical strike / lock are connected directly to the unit.

NFC for door opening opening doors using smartphone 2N® Access Unit RFID NFC for door opening opening doors using smartphone mobile application needed Free Available for Android on Google Play applies to 13.56MHz reader 2N® Access Unit will allow you to open the door not only using an RFID card or key fob, but also using an NFC-enabled smartphones (Android 4.4 and higher). The only thing you need is 2N® Mobile Key app that is available for free on Google Play Applies only for 13.56MHz reader!

2N® Access Unit RFID CONNECTION TOPOLOGY

MOUNTING ACCESSORIES 2N® Access Unit RFID RJ45 pigtail Surface frame 916020 Surface frame 9155021 Backplate 9155061 Flush mount frame 9155011 Flush mount box 9155014 It is possible to connect almost any module from Helios IP Verso to this unit via Vbus cable as you are used to from current AU

ADDITIONAL ACCESSORIES 2N® Access Unit RFID ADDITIONAL ACCESSORIES Security Relay 9159010 Strike with contact 932061E Door contact 9159012 Exit button 9159013 NFC license 916012 It is possible to connect almost any module from 2N IP Verso to this unit via Vbus cable as you are used to from current AU

2N® Access Unit (13.56MHz + NFC) 2N® Access Unit RFID PRODUCT VARIANTS 2N® Access Unit (125kHz) 916009 2N® Access Unit (13.56MHz + NFC) 916010

RFID Card reader (125kHz or 13.56MHz) 2N® Access Unit RFID EXTENDING MODULES RFID Card reader (125kHz or 13.56MHz) 9155032 9155040 Keypad module 9155031 Touch Keypad 9155047 Fingerprint Reader 9155045 It is possible to connect almost any module from Helios IP Verso to this unit via Vbus cable – it allows you to combine different technologies or to have a solution for both side protection of your door Connection is made via special extension cable (length is 1, 3 or 5m)

EXTENDING MODULES 2N® Access Unit RFID Bluetooth module I/O module 9155046 I/O module 9155034 Extension cable 9155050 (1m) 9155054 (3m) 9155055 (5m) It is possible to connect almost any module from 2N IP Verso to this unit via Vbus cable – it allows you to combine different technologies or to have a solution for both side protection of your door Connection is made via special extension cable (length is 1, 3 or 5m)

Technical Specification 2N® Access Unit RFID Technical Specification Interfaces Power supply: PoE (802.3af) and/or 12V ±15 % / 2A DC Passive switch: dry and wet contact, up to 30V/1A AC/DC Active output: up to 12V DC and 550mA Inputs: passive / active mode (-30V to +30V DC) RFID card readers Supported 13.56MHz cards (only card S/N is read): ISO/IEC 14443A: Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C ISO/IEC 14443B: CEPAS, HID iCLASS JIS X 6319: Felica ISO/IEC 18092: SmartPhone with NFC/HCE support Supported 125kHz cards: EM4100, EM4102, HID Prox