Nabertherm P 300 HT Oven Classification: Internal © Statoil ASA

Slides:



Advertisements
Similar presentations
P1.1.4 Heating and Insulating Buildings
Advertisements

Design for Elderly and Disabled Environments:
Moisture Control. Indications of Excessive Moisture Condensation,frost or ice on the inside surface of windows Damp spots on ceilings or inner surfaces.
East Bridgford Project Existing Projects The Green Box Project Adaptation Techniques used within this project:- Natural ventilation is increased by a passive.
inFire HTC speed Furnace Webinar
Copyright by Silca S.p.A Duo Plus Your first Silca Machine! Enter the world of high quality Locksmithing.
Mate Grinder MATE European Dealer Meeting Advantages of Automatic Controlled Punch and Die Grinding More regrinds, accurate material removal Protect.
ATD Assembly. ATD Assembly #1 Dewar Assembly #1 Status: Dewar has been completely assembled and vacuum tested. No vacuum leaks were detected on the outer.
STATESMAN Campers, Raising the standards. STATESMAN XP- 3.
Technical Changes reserved Page 1 Technical Changes reserved Köhler ® Banquet Trolleys hot and cold...for serving high-quality menus within short time.
Fiber Distribution Point for Underground VSOF-CS403A-SD Connector type Fiber Distribution Point.
Bricking the Mason 2x4 Evaporator
The Mondial Forni Mondial and Ecomondial steam tube fixed deck ovens, gas or gasoil heated, are composed of independent decks with standard working height.
The Thermo Furnace: Design, Build and Validation An-Najah National University Mechanical Engineering Department Supervisor: Dr. Iyad Assaf Graduation Project.
 A 'heat exchanger' may be defined as an equipment which transfers the energy from a hot fluid to a cold fluid. Here, the process of heating or cooling.
ALRDC Seminar New and Novel Artificial Lift Technologies ConocoPhillips, Houston, Texas May 14, ½” Inverse Gas Lift System and Dual Flow Hanger.
Thermal Analysis of short bake out jacket version 1 12-Nov-2013.
With over 60 years experience Mondial Forni ensures the highest baking quality and maximum reliability in their ovens. The Ciclomondial combustion gas.
SMAW- Electrodes NCCER Unit 8.
Presentation on Installation of a Domestic Cold Water Storage Cistern
The machine is built to comply with the accident prevention, hygiene and electric standards in force. MODUL SERIES MODULAR DECK OVENS Control panel features:
Alarmline Linear Heat Sensor Typical Applications.
Single PET-module Design Update 1 TRIMAGE Meeting Munich, Dec. 12,2014 WP 3 Design and optimization of PET-system Andreas Seebacher, raytest.
Architectural Graphics UNT in partnership with TEA. Copyright ©. All rights reserved.
More than a Pretty Picture: Photograph & Digitization Management Noraleen A. Young CA Keeping History – GSUSA September, 2009.
The Renson Headquarters Renovation issue Renovation issue Major findings Major findings The RENSON- The RENSON- Headquarters More information... More information...
Ultra-Compact Electrical Machines for Wind Energy DE-FOA : Demo Machine C. L. Goodzeit and M. J. Ball May 1, 2014 Part 1: Design and Construction.
Mondial Forni’s tradition of producing steam tube ovens and the experience built up over 60 years of innovating steam tube technology has enabled us to.
1 NEW FAIRFIELD FREE PUBLIC LIBRARY Renovation Project
Design & Layout of Foodservice Facilities Reading Architectural Drawings Using the Architects’ Scale.
Framed Canopy Fitting Instructions Contents – 6- Angled frame fixing brackets 1 x handle pack 6 x self drilling tech screws 3 keys 1x door 6 x coach screws.
09/03/2010 ADO-PO section meeting Beam Pipe Extraction/Insertion R. Vuillermet.
22 October 2005MICE Meeting at RAL1 Tracker Solenoid Overview Michael A. Green Lawrence Berkeley Laboratory MICE Collaboration Meeting 22 October 2005.
Introduction to Drafting and Design
1 1 Weatherization & Indoor Air Quality Impacts of Weatherization on Air Quality and Comfort Inside Your Home Prepared with the assistance of Jed Harrison,
BUSINESS COMMUNICATION SECOND CANADIAN EDITION Part III: Writing for special purposes Chapter Nine: Writing business reports Original Slides by Gates Stoner.
DURAM PERSONAL ESCAPE MASK A simple step for survival Training Manual.
1 Product Presentation January Normal BinROXELL Bin Old feed Normal bin: ‘centerflow’ feed flows first in center  bridging ‘mass flow’ feed.
Optical Termination Box VSOF-OTB-E OPTICAL TERMINATION BOX [OTB-E-48c]
Distribution System If microorganism colonize a storage vessel, the latter then acts as a microbial reservoir and contaminates all water passing through.
Vendelso.
TT/SIN Department | 8/29/2012 | © Robert Bosch Engineering and Business Solutions Limited All rights reserved, also regarding any disposal, exploitation,
Internal Flow: Heat Transfer Correlations Chapter 8 Sections 8.4 through 8.8.
Architecture Supported by:
Internal Flow: Heat Transfer Correlations
Machinery Auxiliary Systems
Connectivity to bank and sample account structure
Engine Lubrication Systems
Welcome To Big Board Facts.
Combined Hot-Smoking & Cooking Installation
Properties and combustion of fuel oils
Rongma.
Receptacle Housings for M-Style Infinite Switches
Service channels between Tracker and PP1
Overview – Nb3Sn Furnace
Product Presentation January 2010.
- STT LAYOUT - SECTOR F SECTOR A SECTOR B SECTOR E SECTOR D SECTOR C
TOPIC: BRICKS.
Endcap shielding senarios:
Explosion while charging materials in a reactor
Duct casings for particulate filters DCA
Pre – Trip Inspection Training
Smokes extraction principle
Heat and Temperature GLO 3
Bunker Wall Design Wall ESS
HEAT EXCHANGE IN BUILDINGS. TERMINOLOGIES Thermal conductivity: is the rate of heat flow through a unit area of unit thickness of the material for a unit.
Quick start guide MS110 SHIPPING/Set Up/ Operation REQUIREMENTS
Internal Flow: Heat Transfer Correlations Chapter 8 Sections 8.4 through 8.8.
TERMS AND CONDITIONS   These PowerPoint slides are a tool for lecturers, and as such: YOU MAY add content to the slides, delete content from the slides,
Presentation transcript:

Nabertherm P 300 HT Oven Classification: Internal © Statoil ASA 19 september 2016

Classification: Internal © Statoil ASA 19 september 2016

w/d/h (inner): 320 mm / 320 mm / 320 mm Model: P 300 LH 30/12 (30 l volume) Year: 2014 Tmax 1200 °C 400 V, 3/N/PE~ w/d/h (inner): 320 mm / 320 mm / 320 mm w/d/h (outer): 700 mm / 930 mm / 1285 mm Heating Power 7.0 kW (3 – phase) weight: 200 kg Classification: Internal © Statoil ASA 19 september 2016

Five-sided heating for very good temperature uniformity Dual shell housing with rear ventilation, provides for low shell temperatures Five-sided heating for very good temperature uniformity Heating elements on support tubes ensure free heat radiation and a long service life Controller mounted on furnace door and removable for comfortable operation Protection of bottom heating and flat stacking surface provided by embedded SiC plate in the floor Multi-layered, fiber-free insulation of light refractory bricks and special backup insulation Door with brick-on-brick seal, hand fitted Short heating times due to high installed power Side vent with bypass connection for exhaust pipe Self-supporting arch for high stability and greatest possible protection against dust Quick lock on door Freely adjustable air slide intake in furnace floor Stand included Classification: Internal © Statoil ASA 19 september 2016

Presenters name/title, etc Presentation title Presenters name/title, etc www.statoil.com © Statoil ASA This presentation, including the contents and arrangement of the contents of each individual page or the collection of the pages, are owned by Statoil. Copyright to all material including, but not limited to, written material, photographs, drawings, images, tables and data remains the property of Statoil. All rights reserved. Any other kind of use, reproduction, translation, adaption, arrangement, any other alteration, distribution or storage of this presentation, in whole or in part, without the prior written permission of Statoil is prohibited. The information contained in this presentation may not be accurate, up to date or applicable to the circumstances of any particular case, despite our efforts. Statoil cannot accept any liability for any inaccuracies or omissions.