3D machining 2 Contents

Import model View of the parts model Folder of imported model items Import geometry model Contents

Workpiece setup Workpiece parameters tab Create workpiece by extruding a closed curve Top and bottom levels of the workpiece Workpiece contours closed curve Workpiece contour Workpiece model Contents

Create operation Create operation menu Roughing waterline Roughing operations New Roughing waterline operation Contents

Part parameters tab Part and Workpiece SprutCAM uses the contents of the Model folder as the Part for machining by default. The default workpiece is a prism box around part the Part. Workpiece can be imported from external source as well. Use part of previous operation Workpiece parameters tab Use result of previous operation as workpiece Contents

Operation parameters Parameters of the active operation Active operation Contents

Operation parameters Contents

Toolpath Calculate toolpath Toolpath Toolpath calculated without errors Contents

Machining simulation Continuous simulation Result of simulation Contents

Create operation Roughing waterline Roughing operations New Roughing waterline operation Contents

Job assignment Job assignment parameters tab Contour created with the built-in 2D Geometry drafting system View of the work area with workpiece A closed contour limiting the machined area to the groove on the part is used as the Job assignment. Contents

Machining parameters Contents

Toolpath calculation Run toolpath calculation Toolpath Indicates calculation success Contents

Machining simulation Continuous simulation Result of previous operation Result of machining simulation Contents

Create operation Finishing Complex Finishing operations New Finishing Complex operation consists of two operations – Finishing plane and Finishing waterline operations Contents

Machined part and workpiece The part for the Finishing complex operation is the part from previous operations. The workpiece is the machining result of previous operations. Machined part Use part of the previous operation Workpiece parameters Use machining result of the previous operation Contents

Finishing plane parameters Contents

Finishing waterline parameters Contents

Toolpath Calculate Toolpath Calculation is successfull Toolpath of the Finishing plane operation Toolpath of the Finishing complex operation Toolpath of the Finishing waterline operation Contents

Continuous simulation Machining result Machining simulation Contents

Create new operation Finishing drive (rest) Rest machining operations New Finishing drive (rest) operation Create operation Contents

Part and Workpiece The part for the Finishing drive (rest) operation is the part of previous operations. The workpiece is the machining result of previous operations. Machined part Reference to the part model Workpiece Reference to machining result of previous operations Contents

Finishing drive (rest) parameters Contents

Toolpath calculation Calculate toolpath Calculation is sucessful Rest areas machined by the finishing drive(rest) operation Contents

Machining simulation Blue colored areas are machined by the Finishing drive (rest) operation Continuous simulation Contents

Machining simulation for each operation Finishing result of machining Contents

Tools list compiling Create Tools list Tools list dialog Views configuration Objects visibility panel Document pattern Contents

Tools list Technology operations Document header List of tools Machining time Views of model geometry Contents

Postprocessors Create NC-program Postprocessor configuration file File of the NC-program NC-program code listing Contents