LOM 320 BITZER ECOSTAR – CONTROL LMC341 DIWE via BEST inalambrico Con software BEST software en la computadora - windows Via Bluetooth 4.0 Via cable - USB USB-Cable ~30 meters ~2 metros LOM 320 Cable Cat 5e or higher must be used for the LOM 320 Please note: Every device connected to an intranet or the Internet must have a unique IP address. If two devices or computers have the same IP address none of them will work and it may affect other computers as well. A Net mask is used to restrict how many IP addresses a computer can see. To ensure a good performance most devices use the Net mask 255.255.255.0 and this also applies to the LOM320. A Net mask of 255.255.255.0 means a device can only see other devices where the first 3 groups are the same, i.e. a laptop would have to have an IP address like 192.168.1.100 to be able to access the web server on the LOM320 at IP address 192.168.1.180. The LOM320 has a default static IP address of 192.168.1.180 and a fixed Net mask of 255.255.255.0. A dynamic allocation of an IP address from a DHCP server is not supported. The LOM320 will therefore always have the same IP address. The IP address of the LOM320 can be changed on the LUP operating panel connected to the LMC300 controller or from LMT – Lodam Multi Tool PC software tool.

BITZER ECOSTAR – CONTROL LMC341 DIWE via WEB Via Internet Explorer Cable RJ45 ( Router ) Totalmente disponible RJ45 www via Internet LOM 320 Cable Cat 5e or higher must be used for the LOM 320 Please note: Every device connected to an intranet or the Internet must have a unique IP address. If two devices or computers have the same IP address none of them will work and it may affect other computers as well. A Net mask is used to restrict how many IP addresses a computer can see. To ensure a good performance most devices use the Net mask 255.255.255.0 and this also applies to the LOM320. A Net mask of 255.255.255.0 means a device can only see other devices where the first 3 groups are the same, i.e. a laptop would have to have an IP address like 192.168.1.100 to be able to access the web server on the LOM320 at IP address 192.168.1.180. The LOM320 has a default static IP address of 192.168.1.180 and a fixed Net mask of 255.255.255.0. A dynamic allocation of an IP address from a DHCP server is not supported. The LOM320 will therefore always have the same IP address. The IP address of the LOM320 can be changed on the LUP operating panel connected to the LMC300 controller or from LMT – Lodam Multi Tool PC software tool.

Gracias