Public Safety Radio System Pager Operation Motorola Minitor V
Two Frequency Store Voice with Scan and VIBRA-Page What Was Purchased? Two Frequency Store Voice with Scan and VIBRA-Page Frequency One will be Paging Channel Frequency Two will be County Wide Scan mode will have the Paging Channel set as the Priority Channel when in scan mode. 2/22/2013 Minitor V Operation Revision -
Function Switch Function switch will be configured to 4 different function modes (monitor/selective call, scan, etc.) can be configured for any position of the switch. When set to a monitor position, all voice communications on the selected channel is heard through the speaker. When monitoring all ordered alert options are functional. 2/22/2013 Minitor V Operation Revision -
Function Switch Configuration 1 Channel Pagers A - Selective Call F1, Vibrate Alert B - Selective Call F1, Tone & Vibrate Alert C - Selective Call F1, Tone Alert D - Monitor F1, Tone & Vibrate Alert F1 – Paging Channel 2/22/2013 Minitor V Operation Revision -
Function Switch Configuration 2 Channel Pagers A - Selective Call F1, Vibrate Alert B - Selective Call F1, Tone & Vibrate Alert C - Monitor F1, Tone & Vibrate Alert D - Priority Scan F2 F1 – Paging Channel F2 – FIREOPS1 2/22/2013 Minitor V Operation Revision -
Reset Button After receipt of a properly coded message and after completion of that message, the alert monitor will automatically reset to the programmed operational mode. 2/22/2013 Minitor V Operation Revision -
Scan (Two-Frequency Models Only) All alert monitors that are equipped with two frequencies are capable of scanning the two channels for selective call or monitoring purposes. 2/22/2013 Minitor V Operation Revision -
Unread Message Indicators The red LED turns on if there are any unread messages. The pager generates a reminder alert approximately every two minutes when an unread message exists. 2/22/2013 Minitor V Operation Revision -