LUMEN METHOD E= N x n x ø x UF x MF A

Slides:



Advertisements
Similar presentations
LAMPS (Chapter 3) Lamp efficacy, life, and color Incandescent
Advertisements

Lighting System Design
DRAFT BEE CODE - LIGHTING Prepared by Devki Energy Consultancy Pvt. Ltd. Vadodara
16469 Low Energy Building Design Lighting Cameron Johnstone Department of Mechanical Engineering
Key criteria for selecting an LED solution Marco Wendling Lietcorp GmbH.
Van Ness BRT Lighting Criteria Lighting Performance Characteristics.
Lamp Output Presentation Halogen Vs EM Halogen Fluoro Vs EM Halogen.
16469 Lighting and Daylighting Design. Energy Efficient Lighting Lighting accounts for a significant portion of energy use in commercial buildings We.
K. F. Chan (Mr.)ELEC LUMEN METHOD Utilization factor -- Ratio of flux received by reference plane to total rated lamp flux in the installation. Utilization.
1 times table 2 times table 3 times table 4 times table 5 times table
Only Ventronic offers you all these benefits SIGNIFICANTLY INCREASED LUMEN MAINTENANCE VASTLY IMPROVED LAMP LIFE SUPERIOR LIGHT QUALITY ENERGY SAVINGS.
Lighting calculations
Electrical Lighting & Cable Selection D.K.Pathirana.
Photometric Data Photometry is the science of measurement of light.
Public Lighting and Energy Saving in Italy The plan of the Italian Government for road and public area lighting and the new MD
Topic 2 - Overview of Image Acquisition and Processing Systems DIGITAL IMAGE PROCESSING Course 3624 Department of Physics and Astronomy Professor Bob Warwick.
Artificial Lighting Design Task lighting for general purpose rooms involves the installation of light sources that will provide the optimum amount of.
Landscape for Deemed Lighting Workpapers Building Code and Voluntary Program Relationship Building Code Changes Driven by Big Vision Voluntary Program.
K. F. Chan (Mr.)ELEC INTERIOR LIGHTING DESIGN The basic aim of good lighting design should be to create a lighting installation that provides both.
1 Lighting Learning outcome from this topic, the student is able to – recognize the definitions and meanings for terms used in lighting – calculate lighting.
Chap 16-1 Light Fundamentals. What is Light? A transverse electromagnetic wave.
Department of Technical Education
Department of Technical Education Andhra Pradesh
9EE605A.7to81 Department of Technical Education Andhra Pradesh Name Designation Branch Institute Year/Semester Subject Subject Code Topic Duration Sub.
Objectives Learn about lighting design.
$100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300.
Tables Learning Support
STREET LIGHT MANAGMENT Predstavlja: Milan Breznik (Breznik in Breznik d.n.o)
Date of download: 6/21/2016 Copyright © 2016 SPIE. All rights reserved. Schematic of the circularly prescribed illumination problem. Figure Legend: From:
Illumination Basic & Scheme Elements of Electrical Design 5 TH SEMESTER Lakhani Ankit Hareshbhai Prepared by.
LEVEL 4 ENERGY ASSESSOR TRAINING 8. Level 3 re-cap lighting and Power Factor Correction.
Power consumption is calculated in kW-Hr = Total Power x time of use
Illumination Devices Measurement Unit.
CIBSE Technical Seminar
Incandescent Light Bulb LUMEN DESIGN METHOD Where: N = E A F UF LLF N = number of lamps E = level of illuminance A = Area at working plane.
ART 2640, Building Systems of Interior Environments Fall Semester 2016 Tuesdays & Thursdays 9:00-10:20 Grover Center E218 Matthew Ziff, Associate Professor.
LIGHTING IMPROVEMENT IN CUTTING STATION
Lux The lux (symbol: lx) is the SI unit of illuminance and luminous emittance, measuring luminous flux per unit area.[1] It is equal to one lumen per square.
METHODS OF ILLUMINANCE CALCULATION
Evaluation and design of road lighting
Graphing Ratios.
914S 913S DOME CAMERA 1/4” INTERLINE CCD COLOR DOME CAMERA
CORE AREA K. F. Chan (Mr.) MEBS6002.
965 / 965H DOME CAMERA INTERLINE CCD COLOR DOME CAMERA ~ Description ~
ILLUMINATION.
Times Tables.
Designing with led.
Outdoor Lighting Module 9 Lighting Design – Advanced
Outdoor Lighting Module 8 Lighting Design – Basics
NATIONAL LIGHTING CODE
OPTICAL DESIGN K.F. Chan (Mr.) MEBS UNIVERSITY OF HONG KONG
Landscape lighting for driveway
Point-by-Point Factors
Comparison MEBS 6002 K.F. Chan (Mr.).
OPTICAL DESIGN K.F. Chan (Mr.) MEBS 6002.
Motor torque slip curve at 2 different supply voltages
6.RP.3a Make tables of equivalent ratios relating quantities with whole number measurements, find missing values in the tables, and plot the pairs of values.
Bulkhead security lighting
ELLIPTICAL REFLECTOR K.F. Chan (Mr.) MEBS
Unit 6- Adventures – Meb Kazanım Testi
Objectives Learn about lighting design.
Announcement Filed trip is on Monday, May 6th from 8 to 9 AM
Announcement Next class: 15 minutes quiz
LOUVRES Cut off angle Specular-shape louvre, e.g. dark light parabolic side K.F. Chan (Mr.) MEBS
Warm - Up 1) What is the speed of light?
3 times tables.
6 times tables.
Fig. 5 Maps of Europe’s artificial sky brightness, in twofold increasing steps, as a ratio to the natural sky brightness (assumed to be 174 μcd/m2). Maps.
The Properties of Light
Presentation transcript:

LUMEN METHOD E= N x n x ø x UF x MF A where MF = LLMF x LSF x LMF x RSMF E =Maintained illuminance, lux A = Area, m2 Ø = Initial lamp flux, lumen K. F. Chan (Mr.) MEBS6002

LUMEN METHOD Utilization factor Ratio of flux received by reference plane to total rated lamp flux in the installation. Maintenance factor – -- LSF -- LLMF -- LMF -- RSMF K. F. Chan (Mr.) MEBS6002

K. F. Chan (Mr.) MEBS6002

K. F. Chan (Mr.) MEBS6002

K. F. Chan (Mr.) MEBS6002

K. F. Chan (Mr.) MEBS6002

LLMF & LSF K. F. Chan (Mr.) MEBS6002

(Taken from Table 3.4 of CIBSE Code for Lighting, 2002) K. F. Chan (Mr.) MEBS6002

LMF K. F. Chan (Mr.) MEBS6002

LMF (Taken from Table 3.5 and 3.6 of CIBSE Code for Lighting, 2002) K. F. Chan (Mr.) (Taken from Table 3.5 and 3.6 of CIBSE Code for Lighting, 2002) MEBS6002

RSMF K. F. Chan (Mr.) MEBS6002

RSMF (Taken from Table 3.7 of CIBSE Code for Lighting, 2002) K. F. Chan (Mr.) MEBS6002

K. F. Chan (Mr.) MEBS6002