Co-extrusion Die
Transverse Direction Orientation
Another Coextrusion die
Flat Film Die
Ram Extrusion
Sheet Die with feed block for coextrusion
Screw Nomenclature
Screw & Breaker Plate assembly
Polyethylene type Screw
Nylon-type screw
Pipe Extrusion Plant
Three zones of the Screw
Twin Screw Co-rotation system
Twin Screw Counter-rotation system
Extrusion Die Parts
Spider Die with Mandrel as seen from (a) side and (b) rear
Curaway of a typical spiral-mandrel film extrusion die
Changes in shape that occur between the die orifice and the finished part
Die-swell compensation by changes in die orifice design in complicated extruded profile parts
Blown Film Extrusion Line
A multi-story blown film line
Dry sizing unit for pipe or tubing
Sheet and flat film – making plant
Extrusion coating of paper
Calendering system
Clothes hanger die for sheet extrusion
Extruder parts
Cross-section of a typical screw extruder with the die turned down
Screenpacks of various sizes
Extrusion Blow Moulding