Above is the backside of the Bryko with support arm Below is the trimming compartment with hood open Above the simple to read information screen Below is the glue, pressure and edge feeding stations

Cehisa: Designing and building quality edgebanders since 1956 Cehisa BRYKO: Built for customers who need a quality edgebander but have limited floor space and finances. The Bryko is designed for everyday use. Equipped with PLC controller and Electronic Digital information screen. Easy Setup Features: Simple numerical controls allow for quick changes from thin Tapes to Laminate or Wood strips. The Quick Start glue system is Teflon coated and easy to maintain. Commercial Motors: The trimming stations feature High Frequency trim motors for long life and beautiful cuts. Insert tooling is standard for the Top & Bottom trimming and Carbide tipped saw blades are standard on the End Trim station. Heavy Duty Feed Components: Heavy drag chain and beam rollers as used on the larger Cehisa machines. ▶Capacities: Panel thickness can range from 3/8” to 1 ½”. Minimum length of panel material is 5” and width is 3”. Maximum edging thickness is 2mm (25/32”). ▶Requirements: 84” x 40” floor space, 100 PSI compressed air, 800 CFM dust collection, 15 amp circuit at 220volt/3phase, or 220olt/1phase is optional Contact Adwood 336-884-1846