Call Accounting System How-to Support Multiple TelCos By: Tran Hong Quang Online Training Lesson 003:

Agenda 1. Customer may have multiple TelCos 2. How to setup multiple Telephone Tariffs 3. Making some tests 4. Contact me

Customer May Have Multiple TelCos

Company may lease fixed phone service from more than one Telco. Some trunks connected to each TelCo. From PBX, these trunks must be numbered uniquely. Two Telco will have two telephone tariff. Basing on outgoing trunk, billing software has to apply correct Telephone Tariff.

How-to Setup Multiple Telephone Tariffs

Go to Call Charge Scheme>>Telephone Rate Tables. On Combo box named Select Action at the bottom of the form, select Create new Tel. Rate Table >> click on Execute to create empty Telephone Rate Table. Next, you create Call Types and Area Codes for newly- created Telephone Rate Table. Finally, assign relevant Trunks of each TelCo to their Telephone Tariff by entering it into list box named Trunks on right hand side. You will see Screenshots on next slide

Screenshot of Supporting Multiple Tariffs You can see Trunk = 02 in the list. With this settings, any CDR which has Trunk = 02 will be applied Telephone Tariff Second Telcos Telephone Tariff

Screenshot of Supporting Multiple Tariffs You can see Trunk = 01 in the list. With this settings, any CDR which has Trunk = 01 will be applied Telephone Tariff Viet Nam Post & Telecom Trunk = any and check as Dummy is the way to appoint one Telephone Tariff as default one. For example, you just explicitly assign Trunk 01 and 02, what about if CDR has trunk = 04, 05, 06…? My software will look for Telephone Tariff assigned with Trunk = Any to calculate call charge for such calls.

Making Some Tests

Go to Call Charge Scheme >> Call Charge Tester >> Enter your test call factor to first tab, then click Bill. You may select Trunk = 01, Trunk = 02 to see the difference in Call Charge. You will find it select the right Telephone Tariff as you expect.

Contact

Check for further information Author contact: