Smart.IC II project

Forklift truck connection Forklift truck connection, outside of the connector Automatic data download through GPRS and anlaysis of working cycles. Data access from: Field applications

Smart.IC II GPRS AP882 Forklift truck GPRS communication TELEPHONE company SmartView II CUSTOMER Serverweb ALFA PROGETTI Smart.IC II system INTERNET

Cutting down on maintenance costs Overall monitoring on battery and forklift truck use Automatic signalling if water topping up is needed Automatic weekly messages reporting bad uses and needed actions Problems supported with written evidence in disputes with customers and suppliers Saving thanks to an optimized fleet management Rating of suppliers and customers according to their reliability Extraordinary maintenance invoicing possible Features Invoicing of maintenance required because of bad use Smart.CB: Makes battery life longer Allows you to save on charging costs Customers made more responsible

Power Saving SMART.IC II + SMART.CB Charges battery during the cheapest hours Restores only the capacity used by the battery Makes battery life longer The cheapest hours to charge battery can be programmed

Data collected by Smart.IC II can be displayed with: SmartView II: Personal computer program SmartWeb: web pages accessible from Software: PC and WEB In addition SmartService will send you an message if a failure is detected or forklift truck or battery needs checking.

It is possibile to analyze instantaneous data ONLINE System status Smart.IC II panel Relay status indication Battery level indicator Battery voltage Inside and outside temperature Data: Monitor

Instantaneous diagrams downloaded by the Smart.IC II connector ONLINE Current diagram Voltage diagram Data: Diagram

General information on the stored cycle Data for searching the Smart.IC II connector Rating Battery state while charging Date and time of charge start Battery state on discharge Date and time of discharge start Battery state at cycle start Battery state at cycle end Data: Old

Details of the stored cycle Discharge dataCharging data Data: Info Old

Averages calculated from stored data Cycles selection Discharge stage: Average capacity at the end of the discharge cycle Discharged average capacity Average capacity not available Charging stage: Average capacity at the end of charging Data: Averages

Statistics collected by the Smart.IC II connector Battery statistics: Discharge time Charging time Stop time Statistics collected and faults, if any Data: Statistics Statistics collected by the Smart.IC II connector

The functioning of Smart.IC II can be customized by using some programming parameters concerning the discharge and charging stage of the traction battery where the connector is installed Rating Discharge parameters WEB parameters Charging parameters Data: Programming

Data: Daily Monthly report on data concerning the daily working cycles Time selectionDaily summary of operating data: Start and end date of the cycle Duty hours during a day Downloaded Ah during a day Minimum voltage reached in the last working cycle of the day Underdischarge time of the last working cycle of the day Cycle no. which it refers to Monthly total

Faults Summary Faults summary Battery Faults Charger Faults User Faults

Data Summary Tabular Data Summary

Example: weekly report Weekly check

Example: monthly report Monthly summary