Preventative Maintenance & Service Consultant Workshop Preventative Maintenance & Service

Preventative Maintenance and Service Why do it? Longer machine life Less catastrophic, expensive repairs Optimized operation Full ice production capacity Minimized energy consumption Proper PM results in a 10-12% ROI

Preventative Maintenance and Service Improperly installing an ice machine is sure to lead to many service problems later. Check manufacturers’ specifications Check that the unit is level, front to back and side to side Check for proper sizing and routing of water and drain lines, and adequate water flow Check for adequate electrical power supply according to the nameplate

Preventative Maintenance and Service Allow for proper air flow around the equipment and maintain proper ambient conditions Front and Side air intake kits Always follow manufacturers’ recommended start and check procedures Complete the warranty registration procedures Go over unit operation and recommend maintenance procedures with the customer.

Maintenance Schedule A minimum of two times per year More often if mineral scale builds up rapidly Plan to: De-scale water system Sanitize water system and storage area Clean air filter and / or condenser Greasy, dusty environments require more frequent air filter cleaning

Remote Condenser Coil Clean dirt from coil fins Switch unit off Spray on coil cleaner Rinse off Straighten fins with fin comb

Maintenance Schedule Refrigeration Leak in lines Bad installation Line sets run properly Electrical Check components Proper voltage Water Most frequent cause of unit failure