Custom Adapter: ThorLabs RP01 Rotation Stage to Cambridge Technology D03806 REV B1 Galvo Mount Adapter to connect ThorLabs RP01 rotation stage to Cambridge Tech. D03806 REV B1 galvo mount Caution: Multiple types of Cambridge galvo mounts are used at LOCI Made from 0.500 thick scrap aluminum Not to scale All dimensions are in inches Only exactly important dimensions are spacing between large holes (fit to grid on RP01 – 1.000 on diagonal) and between smaller holes (fit galvo mount 0.750 and 0.625 spacing) Smaller holes allow mount to be screwed into adapter with 5-40 bolts Larger, countersunk holes allow for 8-32 bolts to hold adapter to stage Goal is to have galvo mirrors centered on rotation axis of stage Coordinates give locations of lower left corner of piece and centers of holes 5-40 tapped (through) (0.365, 1.450) φ = 0.312 (0.212 deep, flat bottom) (1.115, 0.825) (0.548, 1.020) 1.630 φ = 0.196 (through) 5-40 tapped (through) φ = 0.196 (through) φ = 0.312 (0.212 deep, flat bottom) (1.255, 0.313) (0.000, 0.000) 1.630 For OWS2 – Josh – March 2015