Master Terafan Greydragon’s Bench design 36” 3 3/16” 18” 30.25” 2.5” 3.5” 1.5” round hole 31.5” 10o 7.5” All measurements based on 5/4” thick wood Standard 1x12 is too thin (really only 3/4” thick) Cross brace is a standard 2x4 Brace pegs can be cut from 1.5” dowel

Terafan’s bench design - page II 36” 12” 2” 3 3/16” 2” The “extra” lines are an attempt to show the results of the 10o angle. The holes must be cut with the 10o angle taken in account. The top and bottom of the legs must have the 10o angle taken in account. 2” 2” 12” 2.5”