Setting Up CITRIX For HQ ACPERS BOA Any Version of Citrix Version 4 or Above Will Work

THIS MIGHT BE YOUR FIRST ICON… CLICK IT

OR ...THIS MIGHT BE YOUR FIRST ICON… CLICK IT

Click Add ICA Connection

SELECT WIDE AREA NETWORK

DROP THIS DOWN AND YOU WANT WIDE AREA NETWORK… WAN

Check Published Applications

Click this to make sure TCP/IP is showing

Don’t worry about this box after you configure… this box will auto populate

Click server location

Uncheck this

Once use default is unchecked then it looks like this

Make sure TCP/IP is clicked down

Then click add

Now add the IP addresses one at a time

IP Addresses IP addresses 128.190.159.170 128.190.159.171 128.190.159.172

Delete the old addresses if there are any

Click this down and you’ll see 3 categories to add your IP addresses. If you don’t use these categories the application will still work but you will need to add IP s to the primary

Click primary and then add

Enter the IP address 128.190.159.170 then click ok

After you add primary IP, add click down to add back up IP addresses

Click add and then add the next IP addresses click ok then click add again for backup 1 and 2 and add the remaining IP addresses

After you enter your last IP addresses click ok… then Click the Firewalls Button

Click on the Firewalls Button Click on the Firewalls Button.. Click on Alternate Firewall connection, then OK

Your screen now looks like this after you enter all the IP s and clicked ok make sure TCP/IP is showing if it is not showing you will not connect If you have not connected, repeat the process. If that doesn’t work contact IM and have them check for local firewall issues

Drop this down until HQ Business Objects Shows and select it

After you select the application the description auto populates Click next

This is fine Click next

Uncheck use default

Then drag down to the bottom selection and choose 128 bit and then click next

Nothing to do… click next

Hurray!!!!!!!!!!!!!!!! Click finish

This is automatically added to your Citrix Neighborhood

YOUR PROPERTIES WILL LOOK LIKE THIS

YOUR SETTINGS WILL LOOK LIKE THIS

Double click this to open up Business Objects

This is as far as you can go without the HQ BOA Password

After you get your passwords enter the first set here

Which gets you to BOA itself login here with your BOA password

You must use your password twice … once for NT once for BOA … You must use your password twice … once for NT once for BOA …. the passwords from one box do not automatically roll over to the other box because the NT box has more on it than just HQ BOA

When you log in you must login into NT (the server) and BOA (the application) each time. When you reset your password on one box this does not automatically mean that the password on the other box has been automatically reset

When you get this… you are in HQ ACPERS BOA

A few extra tidbits Look at your status bar and You’ll see an icon

This is the ICA connection And tells you if you’re connected .. Double click it

This shows that you have connected and what you have connected to

You can use this icon to get out of BOA when the application proves to be …… stubborn Once you are in the application the ICA show which application Your are connected to and which server