Entering Escape of Water Information On the job report screen click on EOW information

Electricity readings Add the electricity meter readings Start and End figures Add the time the readings were taken Add the date when readings were taken

Once finished click submit Equipment used Add the equipment used by the drop down menu Add the quantity of the items installed Add the times installed and removed Add the date installed Add the date removed Once finished click submit

Each date will show as one line in Adding Damp Test Results Click on Add New Reading Set Add the temperatures inside and out. Add the Relative humidity inside and out Add the date and time the reading was taken on Press Add to save the reading. Do this for every reading taken Use the drop down box to choose the Method of Recording. Type in the Location (room) the reading was taken in. Type in the Reading. Press Submit once all readings have been added for that date Each date will show as one line in the EOW box to show how many visits you made to damp test

Dry Certificate Additional comments box is used to advise if there are any areas not dry and reasons for the area not being dry Use the drop down box to choose the technician Add the date and time of the last damp test confirming the property is dry Confirm if the property is or is not dry Press submit to save the certificate Missing EOW information occurs a penalty charge