YOUR ONLY OPTION FOR ALL THINGS STAINLESS. Zeepad Craft Limited ZEEPAD CRAFT LIMITED 5, Olowu Street Off Awolowo Way Ikeja, Lagos NIGERIA www.zeepadcraft.com YOUR ONLY OPTION FOR ALL THINGS STAINLESS.

CANOPIES STEEL CABINET ABOUT US Zeepad Craft Limited Our Stainless Steel works arm at Zeepad Craft Ltd is specialized in the following: 1. Distribution and Supply CANOPIES sheets Pipes 2. Engineering, Design, Fabrication and Erection Canopies Gates Hand Rail Eddy current flaw detector, ultrasonic flaw detector, direct-reading spectrometer, X-ray detector, pressure unit, universal pressure test apparatus, and crystal physics and chemistry equipment are a few of the testing equipment that certify our product market worthy. STEEL CABINET ZEEPADCRAFT

Stainless Steel Barriers Definition Stainless steels are iron alloys with a minimum of 10.5% chromium. Other alloying elements are added to enhance their structure and properties such as formability, strength and cryogenic toughness. These include metals such as: Nickel Molybdenum Titanium Copper Non-metal additions are also made, the main ones being: Carbon Nitrogen Zeepad Craft Limited Stainless Steel Barriers 420 Stainless Steels- 420 steels represent the low end of Stainless Steels. They have very low carbon content (< .5%) and are very corrosion resistant. 420 steels are very soft and have very low wear resistance. Because of this, 420 steels don’t temper well or take/hold an edge very well. On the positive side 420 steels are very tough and very easy to work because of how soft they are.    440 Series- The 440 steels are a higher quality Stainless Steel. These steels will harden when tempered and have more wear resistance than 420 steels, but just barely enough to be acceptable. The other advantage of the 440 family compared to 420 is the increased strength.  154 CM Steel- 154 CM is a high quality steel (super steel), which has a slightly higher carbon content and is a great improvement over 440. It’s a hard steel that hold an edge well. It has reasonably good toughness for how hard it is and has reasonable corrosion resistance for the carbon content. 8Cr MoV14 and 9Cr MoV Steels- Chinese made steels that are similar to 440 but with a higher carbon, cobalt and vanadium content to add more strength to the blade. The AUS Series- Japanese made steels are another improvement on 440. The AUS Series adds vanadium to the content to add strength, make the steel easier to sharpen and to retain an edge.  The ATS Series- Very similar to 154CM steel (super steel), the ATS family are considered high quality steels. ATS-34 has more desirable qualities than ATS-55 due to ATS-34 vanadium content. Many high quality knives are made from ATS-34.  VG 10- Another high quality Stainless Steel (super steel), VG-10 is very popular in modern knife making. Again, vanadium content is added to this steel to increase the steels toughness and strength. This steel is known to be very rust resistant and wear resistant. This steel will take and hold an edge well.  Grade 316 stainless steel has molybdenum-bearing grade making it a fair bit more resilient to corrosive abuse than Grade 304. This is especially noticeable in highly sulfuric, hydrochloric, formic and tartaric environments where pitting usually persists. 316 stainless steel is extremely versatile; not only does it have strong forming and welding characteristics, but it has the ability to fold or roll so it can be easily transformed for a number of varying applications. Additionally 316 stainless steel tends to hold up better than 304 in higher temperature environments. @zeepadCraft

ZEEPAD CRAFT LIMITED 5, Olowu Street Off Awolowo Way Ikeja, Lagos NIGERIA www.zeepadcraft.com No1 Industrial Craft Manufacture Company in Nigeria