SUPER ULTRASONIC CO.,LTD Hot Air Seam Sealing Machine Model : SU-850T 豪優企業有限公司 SUPER ULTRASONIC CO.,LTD Products Features: The machine with three stepper motor :  tape feeding/upper wheel/ down wheel. 1.Large soft-touch and multi-fuction display with high definition are choose for clear display of rate,temperature,operations and programming. 2. Sealing speed, temperature and actions controlled by micro-computer, easy to be adjusted.  3. Both the front length and tailed-end of the tape can be adjusted by computer according to customers' requirements. 4. Tail-end of seam sealing tape can be both finished automatically and manual. There is an alarming device for ceiling limit for safe and longer use of  the fuse. 5. The exterior heating pipe is cooled by air for less possibility of burning workers and prolonging the life cycle.  6. The tape is loosened, conveyed and cut automatically by the motor for much less consumption of tape tail section and high quality of the products. Specification: 1. Power and Voltage: AC220V,60Hz/50Hz 2. Rating efficiency: 2800W 3. Heat control: Max. 700 degree C. 4. Nozzle width: Standard flat nozzle 24mm. 5. Pinch roller width: Standard :25mm. (can be modified) 6. Seam sealing tape width: Standard 14mm~22mm. 7. Upper roller lift: 18~22mm. 8. Dimension: 1350(mm) x 730 (mm) x 1900(mm) ※ 產品改良如有設計變更，恕不另外通知。 *Specifications are subject to change improvement. 總公司:台灣新北市新莊區新樹路244巷57號 HEAD OFFICE:NO.57,LANE 244,HSIN-SHU ROAD, HSIN-CHUANG DIST.,NEW TAIPEI CITY,242,TAIWAN TEL: 886-2-22062251 FAX: 886-2-22062241 E-mail: super@supersonics.com.tw http://www.supersonics.com.tw