FIRELEC Migration Solution Don't let wiring costs prevent you from upgrading a RS3 FIM series system to a DeltaV system This document is the property of FIRELEC. No copy, even partial, allowed without prior writen authorization.

RS3 FIM series > DeltaV Using RIAs FMS-RS3FIM-DV1 RS3 FIM series > DeltaV Using RIAs New DeltaV System I/O card to be removed RIA to be plugged in place of existing FIM module Using RIAs (RS3 Interface Adapters): Keeping existing I/O panels Keeping I/O termination panels and associated process I/Os Installing RIAs (RS3 Interface Adapters) on existing FIM series termination panels

FMS-RS3FIM-DV1 Hardware to be removed Primary PeerWay Secondary PeerWay RS3 ControlFile Control File to be removed Communication Termination Panel Communication Termination Panel to be removed Process I/Os F I M FIM to be replaced by the RIA FIM to be replaced by the RIA

Hardware to be installed FMS-RS3FIM-DV1 Hardware to be installed Secondary DeltaV Highway Cntrl PS I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 I/O7 I/O8 Primary DeltaV Highway The new DeltaV architecture is installed The new FIRELEC I/O cables are installed between RIAs and DeltaV I/O cards Process I/Os R I A Process I/Os R I A Process I/Os R I A

The main advantages of the RIAs for RS3 migration are as follow : FMS-RS3FIM-DV1 Advantages The main advantages of the RIAs for RS3 migration are as follow : Existing I/O cables are just disconnected from the Provox I/O cards and reconnected to the RIA without any change at the same place (same terminals with same labelling and same electrical features) The existing loop drawings are kept without any modification, allowing all maintenance processes and procedures to remain unchanged.