Sector 0 RF System Installation of components (Master Amplifier and PEP Phase Shifter) in October down time. Testing and commissioning during October.

Slides:

Advertisements

Similar presentations

XTCAV X-Band Transverse Deflecting Cavity Project Overview Patrick Krejcik Yuantao Ding, Joe Frisch.

Advertisements

C. Rossi – L4 Project Meeting 3 March 2011 Status and Plans of 3 MeV Test Stand.

R. Akre, P. Emma, P. Krejcik LCLS April 29, 2004 LCLS RF Stability Requirements LCLS Requirements The SLAC Linac.

Eric Bong LCLS FAC Injector-Linac October 27, 2005 Injector Design / Diagnostics / Gun & Linac RF Design E. Bong LCLS FAC.

Ron Akre, Dayle Kotturi LCLS LLRF April 16, 2007 Linac.

Tom Kubicki.  Booster HLRF System to be upgraded using 1kW Solid State Driver (SSD) Amplifiers.  Used to drive the 200kW Power Amplifier  Eliminates.

LLRF Phase Reference System The LCLS linac is broken down into 4 separate linac sections. The LCLS injector will reside in an off axis tunnel at the end.

LCLS-II Linac LLRF Control System – L1, BC1 Zheqiao Geng Final Design Review May 7, 2012.

ILCTA_NML Progress at Fermilab Jerry Leibfritz September 10, 2007.

Control configulation for S1G module operation H. Hayano version 1.

LCLS-II Linac LLRF Control System – L2, L3 Zheqiao Geng Preliminary Design Review May 7, 2012.

Zheqiao Geng 6/5/2012 Plan for Evaluating LLRF Deployment Solution at LCLS-II.

LLRF ILC GDE Meeting Feb.6,2007 Shin Michizono LLRF - Stability requirements and proposed llrf system - Typical rf perturbations - Achieved stability at.

Anders Sunesson RF Group ESS Accelerator Division

Dayle Kotturi System Concept Review/Preliminary Design Review November 16, 2005 LLRF Outline System Concept Review Requirements.

ESS LLRF and Beam Interaction. ESS RF system From the wall plug to the coupler Controlled over EPICS Connected to the global Machine Protection System.

July LEReC Review July 2014 Low Energy RHIC electron Cooling Alex Zaltsman Power Amplifiers and LLRF.

WELCOME TO IHEP. RF Phase Control for BEPCII Linac Accelerator Wenchun Gao.

LCLS LLRF System October 10-13, 2005 LLRF05 B. Hong, R. Akre, A. Hill, D. Kotturi, H. Schwarz SLAC, Stanford, Menlo Park, CA 94025, USA Work supported.

Ron Akre, Dayle Kotturi Lehman October 24-26, 2006 Linac.

Stefan Wilke, DESY MHF-e 1 12th ESLS RF Meeting 1 st October, 2008 at DIAMOND Overview and Status of Assembling and Commissioning the RF-System at PETRA.

RF Phase Reference Distribution for the European XFEL Krzysztof Czuba Warsaw University of Technology, ISE For the RF Synchronization Team P. Jatczak,

WIR SCHAFFEN WISSEN – HEUTE FÜR MORGEN Steps towards beam commissioning: RF system group Paolo Craievich :: RF Section :: Paul Scherrer Institut SwissFEL.

ПЕЧЕНЬ 9. Закладка печени в период эмбрионального развития.

WIR SCHAFFEN WISSEN – HEUTE FÜR MORGEN Intra Pulse Phase Control Manuel Brönnimann :: Paul Scherrer Institut LLRF Workshop 2015.

WIR SCHAFFEN WISSEN – HEUTE FÜR MORGEN Steps towards beam commissioning: Low Level RF system group Thomas Schilcher :: Paul Scherrer Institut SwissFEL.

Work in the Tevatron A0 D0 B0 C0 E0 F0 Separators A49 Separator B48 TEL 2 installation A0 Xtal Collimator 1.5 m collimator A48 Shimming 6 magnets/day At.

ESS LLRF and Beam Interaction

SLAC I&C Division / EE Department

ESS Phase Reference Signal Distribution

Updated with comments 22 may 2017 Updated again 29 June 2017

352MHz Klystron Control for the 3MeV Linac test stand

XFEL Vacuum System Commissioning

LLRF Controls Outline Requirements External Interfaces Schedule Design

WP Coordinaten XFEL RF Operation

WP02 PRR: Master Oscillator and RF Reference Distribution

Injector Performance Requirements Conventional Facilities Update

LLRF and Beam-based Longitudinal Feedback Readiness

A Portion of the SCP RF Control System LCLS Related

LCLS Linac Update Brief Overview L1 & BC1 Progress LTU & E-Dump Status Continuing Resolution Impact.

LCLS Commissioning Parameters

Low Level RF Status Outline LLRF controls system overview

SuperB RF and Other Components

LCLS Injector Commissioning Dates ( )

RF Pulse Shaping.

Project Phases ‘98 ‘00 ‘02 ‘04 ‘06 Preparatory Phase

LCLS Drive Laser Timing Stability Measurements

Low Level RF Status Outline LLRF controls system overview

J. Seeman Assistant Director for PPA/LCLS

LCLS RF Stability Requirements

Electron Beam Systems ETC and Methodology

LLRF Control System Outline Scope Requirements Options considered

Linac Coherent Light Source (LCLS) LLRF Preliminary Design Review LLRF Monitor and Control System September 26, 2005 Ron Akre.

ESS Bilbao RF Systems Overview Pedro J. González

Linac Coherent Light Source (LCLS) Low Level RF Status

Low Level RF Design Outline Scope Requirements Options considered

Introduction CDR Normal Conducting Linac LLRF

LCLS Injector Configuration

European Spallation Source ERIC

Control System Overview Hamid Shoaee LCLS Control System Manager

Linac Coherent Light Source (LCLS) Low Level RF Status

LCLS Commissioning Parameters

Low Level RF Status Outline Overview showing hardware instances

RF introduction Anders Sunesson RF group leader

Linac Coherent Light Source (LCLS) Low Level RF System Injector Turn-on December 2006 February 8, 2006.

LCLS e- Beams System Overview

Vacuum Controls Stephen Schuh Tom Porter 25 October 2006

LCLS Control System Personnel Linac & BC2 Controls progress

LCLS e- Beams Systems Manager

Injector/Linac RF Status

Presentation transcript:

Notes for a LLRF Plan for Development and Testing of Controls/Diagnostics

Sector 0 RF System Installation of components (Master Amplifier and PEP Phase Shifter) in October down time. Testing and commissioning during October down time – required to bring PEP online

Sector 20 RF Reference System The LCLS RF reference system exists separate from the existing RF reference system The pick off for the reference is from the Main Drive Line above the RF Hut. Installation will begin at completion of RF Hut Cables in tunnel will be pulled during 2006 down

Klystron RF Station A Klystron on the linac can be used as a test station for commissioning the RF system as long as the linac is operational.

PPS Items A PPS system needs to be completed and certified before we can turn on LCLS off axis injector klystrons. PPS issues with standby times on klystrons need to be evaluated.

Other Notes RF systems can be turned on without new control system Software development will continue through commissioning