Smitty’s Two Minute Drill #1: Feeders and Branch Circuits

Slides:



Advertisements
Similar presentations
Master Examination Practice Drill # Ted “Smitty” Smith.
Advertisements

DAY 4 CHAPTER 3 CONDUCTOR SIZES,TYPES, ETC.. Continuous Load. A load where the maximum current is expected to continue for 3 hours or more. Continuous.
EET Survey of Electronics
2014 CHANGES TWO MINUTE DRILL COPYRIGHT TED “SMITTY” SMITH ©2014.
©Ted “Smitty” Smith This speed drill focuses on calculations that will be required for the journeyman and masters examination. The question slide.
Copyright 2005 Ted "Smitty" Smith Two Minute Drill Number Three Improving your skill in code Look Up Increasing Speed Drill.
Two Minute Drill Number 32- Journeyman Improving your skill in code Look Up Increasing Speed Drill Copyright 2008 Ted "Smitty" Smith.
Copyright 2008 Ted "Smitty" Smith Two Minute Drill Number 25- Residential Improving your skill in code Look Up Increasing Speed Drill.
©Ted “Smitty” Smith  This speed drill is designed to help you practice calculations. The slides will transition in three and one half minutes instead.
Two Minute Drill #8 Copyright 2005 Ted "Smitty" Smith Practice Code Look Up.
Two Minute Drill Number 26- Residential Improving your skill in code Look Up Increasing Speed Drill Copyright 2008 Ted "Smitty" Smith.
Two Minute Drill #9 Copyright 2005 Ted "Smitty" Smith.
Equipment Use In Occupancies  A receptacle shall not be grouped or ganged in enclosures with other receptacles unless they are so arranged so that voltage.
Two Minute Drill #10 Copyright 2005 Ted "Smitty" Smith.
Two Minute Drill Number 27- Residential Improving your skill in code Look Up Increasing Speed Drill Copyright 2008 Ted "Smitty" Smith.
Calculation Speed Drill # NEC
Smitty’s Speed Drills 2008 Code Drills Health Care Facilities (C) Copyright 2008 Ted "Smitty" Smith1.
Copyright 2005 Ted "Smitty" Smith Practice Code Look Up Two Minute Drill #6.
Copyright 2008 Ted "Smitty" Smith.  Left click on the presentation ICON located at the bottom of the slide directory to the left of the this slide. 
©Ted “Smitty” Smith This speed drill focuses on subjects that will be required for the journeyman and masters examination arranged by chapter of.
Two Minute Drill Number 23- Residential Improving your skill in code Look Up Increasing Speed Drill Copyright 2008 Ted "Smitty" Smith.
Two Minute Drill Number 31- Residential Improving your skill in code Look Up Increasing Speed Drill Copyright 2008 Ted "Smitty" Smith.
Two Minute Drill Number 22- Residential Improving your skill in code Look Up Increasing Speed Drill Copyright 2008 Ted "Smitty" Smith.
Improving your skill in code Look Up Increasing Speed Drill Copyright 2008 Ted "Smitty" Smith Two Minute Drill Number 24- Residential.
2008 Code Drills (C) Copyright 2008 Ted "Smitty" Smith 1 Smitty’s Speed Drills.
Ag. Mechanics for Beginning Teachers
Copyright 2008 Ted "Smitty" Smith Two Minute Drill Number 21- Residential Improving your skill in code Look Up Increasing Speed Drill.
2014 NEC C ODE C HANGES C LASS P ART III C ALCULATIONS Ted “Smitty” Smith 8/15/2014 E Light Electric Services, Inc.
2014 NEC C ODE C HANGES C LASS P ART II Ted “Smitty” Smith 8/15/2014 E Light Electric Services, Inc.
HOUSE WIRING Final Review. Electricity Electricity = flow of electrons Conductor= electricity passes thru easily - Metal, water, person Insulator = restricts.
HOUSE WIRING NOTES. Electricity  Proton – positive charge  Electron – Negative charge  Electricity = flow of electrons Conductor= electricity passes.
ELECTRICAL WIRING WIRING BASICS Written by Bobby Joslin
P RACTICE C ODE L OOK U P Two Minute Drill #7 Copyright 2005 Ted "Smitty" Smith.
Smitty’s Two Minute Drill Grounding
Smitty’s Two Minute Drill Grounding
Planning The Electrical System
Advanced Calculations Drill 1 for the 2011 NEC
License Examination Practice Drill
Chapter 12 Branch Circuits and Feeders. Chapter 12 Branch Circuits and Feeders.
2011 Changes Two Minute Drill
Smitty’s Two Minute Drills
Smitty’s Two Minute Drill Overcurrent Protection
Smitty’s Two Minute Drill Mixed Content -05
Smitty’s Two Minute Drill #9: Special Occupancies
Practice Code Look Up Two Minute Drill #7
Smitty’s Super Speed Drill for Memorization No. 2
Conductors and Cables 2017 NEC
Ampacity Calculations and Overcurrent Protection 1
Calculation Speed Drill #1
Calculations: Transformers and Service Conductor Calculations
Two Minute Drill: Raceways and Boxes 2017
Smitty’s Two Minute Drill Photovoltaic Systems
Overcurrent Protection— Fuses and Circuit Breakers
2014 Changes Two Minute Drill
Two Minute Drill Number 29- Conductors and Raceways
Smitty’s Two Minute Drill Grounding and Bonding
Wiring Circuits Lesson Plan PSTS: C6-7.
Transformer Calculations: Word Problems
2008 Code Drills Health Care Facilities
Smitty’s Two Minute Drill Services, Feeders, and Branch Circuits 1
Load Calculation Speed Drill
Two Minute Drill – Residential 3
Smitty’s Two Minute Drill Varied Number 7
Smitty’s Two Minute Drill The BIG 5 Drill 1
Two Minute Drill – Residential 2
Calculations Review Drill
Calculation Speed Drill Varied-1
Varied Calculations Drill 2
Presentation transcript:

Smitty’s Two Minute Drill #1: Feeders and Branch Circuits A drill to help you improve your code skills and your ability to find answers in the code book. © Ted “Smitty” Smith 2016, 2017

Directions Left click on the presentation ICON located at the bottom of the slide directory to the left of the this slide. Each slide will transition to the correct answer automatically in 2:00 minutes. The correct answer will transition in 5 seconds. Do not worry about writing down the correct answer for now. You will have the opportunity to do that at the end of the two minute drill Good luck

Question 1 An outlet installed for the purpose charging electric vehicles shall be supplied by a ________________ branch circuit. This circuit shall have no other outlets. A. Listed B. Separate C. Multi-wire D. None of the above Copyright 2005 Ted "Smitty" Smith

Question 1 Answer B. Separate 210.17 Copyright 2005 Ted "Smitty" Smith

Question 2 Overhead conductors for festoon lighting shall not be small than ______ AWG unless the conductors are supported by messenger wires. A. 16 B. 14 C. 12 D. 10 Copyright 2005 Ted "Smitty" Smith

Question 2 Answer C. 12 225.6 (B) Copyright 2005 Ted "Smitty" Smith

Question 3 Tire inflation and automotive vacuum machines provided for public use shall be protected by a ____________________. A. Listed over current device rated at 125% of the full load current B. arc-fault circuit interrupter C. Duel element fuse rated at 80% of the full load current D. ground-fault circuit interupter Copyright 2005 Ted "Smitty" Smith

Question 3 answer D. Ground-fault circuit interupter 422.23 Copyright 2005 Ted "Smitty" Smith

Question 4 Loads for new circuits or extended circuits in other than dwelling units shall be calculated with ______________, as applicable. A. a #2 pencil and paper B. A scientific programmable calculator C. either 220.12 or 220.14 D. a derating factor of 75% or 80% Copyright 2005 Ted "Smitty" Smith

Question 4 Answer C. 220.12 or 220.14 220.16(B) Copyright 2005 Ted "Smitty" Smith

Question 5 Branch circuits shall not be derived from autotransformers unless the circuit supplied has a grounded conductor that is ______________________ ___________________ _____ a grounded conductor of the system supplying the transformer. Sized larger than Noncontiguous electrically to Electrically connected to Separated completely from Copyright 2005 Ted "Smitty" Smith

Question 5 C. electrically connected to 210.9 Copyright 2005 Ted "Smitty" Smith

Question 6 What is the minimum height that the auxiliary equipment of electric discharge lamps can be mounted on poles for athletic fields if the voltage rating for the equipment is 600 volts? 10 feet 18 feet 22 feet 30 feet Copyright 2005 Ted "Smitty" Smith

Question 6 answer C. 22 feet 210.6(D)(1)(a) Copyright 2005 Ted "Smitty" Smith

Question 7 High voltage conductors in tunnels shall be installed in metal conduit, other metal raceway or type _____________ cable. A. AC B. NM C. SO D. MC Copyright 2005 Ted "Smitty" Smith

Question 7 answer D. MC 110.53 Copyright 2005 Ted "Smitty" Smith

Question 8 Outdoor mobile home disconnecting means shall be installed so the bottom of the enclose containing the disconnecting means is not less than _________ above the finished grade or working platform. A. 2 feet B. 6 feet, 7 inches C. 10 feet D. 12 feet Copyright 2005 Ted "Smitty" Smith

Question 8 answer A 2 feet 550.32(F) Copyright 2005 Ted "Smitty" Smith

Question 9 Where the positive polarity of a dc system does not serve as the connection point for the grounded conductor, each positive ungrounded conductor shall be identified by:[ Select the answer that is incorrect.] A. a continuous red outer finish B. a continuous red stripe durably marked along the conductors entire length on insulation of a color other than green, white, gray or black C. a continuous red stripe durably marked marked along the conductors entire length on insulation of a color other green, white, or gray. D. imprinted plus signs (+) or the word POSITIVE or POS durably marked on insulation of a color other than green, white, gray or black. Copyright 2005 Ted "Smitty" Smith

Question 9 answer C. a continuous red stripe durably marked marked along the conductors entire length on insulation of a color other green, white, or gray. Missing that it can not be black wire 210.5(C) (2) (a) (1-3) Copyright 2005 Ted "Smitty" Smith

Question 10 Where connected to a branch circuit supplying two or more receptacles, a 20 ampere rated branch circuit shall be allowed to supply ______________ rated receptacles. A. 15 ampere receptacles B. 20 ampere receptacles C. Both A and B D. Neither A or B Copyright 2005 Ted "Smitty" Smith

Question 10 Answer C. Both A and C 210. 21 (B)(3) Copyright 2005 Ted "Smitty" Smith

Question 11 The minimum feeder conductor size shall have an allowable ampacity not less than the maximum load to be served after the application of _________________________. A. any adjustment or correction factors. B. temperature derating adjustments in accordance with 310. 71 C. conduit fill derating corrections based on Table 5 D. continuous duty rating of loads based on 210.11 Copyright 2005 Ted "Smitty" Smith

Question 11 Answer A. any adjustment or correction factors. 215.2(A)(1)(b) Copyright 2005 Ted "Smitty" Smith

Question 12 Vegetation such as trees may be used for support of overhead conductor spans if the attachment point is at least 8 feet above the ground and secured with a device listed for the purpose. A. True B. False Copyright 2005 Ted "Smitty" Smith

Question 12 Answer B. False 225.6 Copyright 2005 Ted "Smitty" Smith

Question 13 The grounded conductor for a service feeder shall not be smaller than the minimum size as required by ___________________. The authority having jurisdiction 250.24(C) The electrical engineer None of the above Copyright 2005 Ted "Smitty" Smith

Question 13 answer 250.24(C) 230.42(C) Copyright 2005 Ted "Smitty" Smith

Question 14 The equipment branch of the Essential Electrical System of a health care facility shall be installed and connected to the alternate power source such that the equipment is automatically restored to operation at ________________. A. no more than 10 seconds from loss of power B. no more than 30 seconds from loss of power C. no more than 2 minutes from loss of power D. at appropriate time-lag intervals following the energizing of the essential electrical system. Copyright 2005 Ted "Smitty" Smith

Question 14 answer D. at appropriate time-lag intervals following the energizing of the essential electrical system. 517.34 Copyright 2005 Ted "Smitty" Smith

Question 15 At least one receptacle shall be installed at each peninsular countertop space with a long dimension of 24 inches or greater and short dimension of __________ inches or greater. A. 6 B. 9 C. 12 D. 18 Copyright 2005 Ted "Smitty" Smith

Question 15 Answer C. 12 210.52(C)(3) Copyright 2005 Ted "Smitty" Smith

End of Drill Click on this slide to continue to the repeat of the questions. The timer will not operate in this section. Click on each slide to advance. Review the questions and look up the answers. Copyright 2005 Ted "Smitty" Smith

Question 1 An outlet installed for the purpose charging electric vehicles shall be supplied by a ________________ branch circuit. This circuit shall have no other outlets. A. Listed B. Separate C. Multi-wire D. None of the above Copyright 2005 Ted "Smitty" Smith

Question 1 Answer B. Separate 210.17 Copyright 2005 Ted "Smitty" Smith

Question 2 Overhead conductors for festoon lighting shall not be small than ______ AWG unless the conductors are supported by messenger wires. A. 16 B. 14 C. 12 D. 10 Copyright 2005 Ted "Smitty" Smith

Question 2 Answer C. 12 225.6 (B) Copyright 2005 Ted "Smitty" Smith

Question 3 Tire inflation and automotive vacuum machines provided for public use shall be protected by a ____________________. A. Listed over current device rated at 125% of the full load current B. arc-fault circuit interrupter C. Duel element fuse rated at 80% of the full load current D. ground-fault circuit interupter Copyright 2005 Ted "Smitty" Smith

Question 3 answer D. Ground-fault circuit interupter 422.23 Copyright 2005 Ted "Smitty" Smith

Question 4 Loads for new circuits or extended circuits in other than dwelling units shall be calculated with ______________, as applicable. A. a #2 pencil and paper B. A scientific programmable calculator C. either 220.12 or 220.14 D. a derating factor of 75% or 80% Copyright 2005 Ted "Smitty" Smith

Question 4 Answer C. 220.12 or 220.14 220.16(B) Copyright 2005 Ted "Smitty" Smith

Question 5 Branch circuits shall not be derived from autotransformers unless the circuit supplied has a grounded conductor that is ______________________ ___________________ _____ a grounded conductor of the system supplying the transformer. Sized larger than Noncontiguous electrically to Electrically connected to Separated completely from Copyright 2005 Ted "Smitty" Smith

Question 5 C. electrically connected to 210.9 Copyright 2005 Ted "Smitty" Smith

Question 6 What is the minimum height that the auxiliary equipment of electric discharge lamps can be mounted on poles for athletic fields if the voltage rating for the equipment is 600 volts? 10 feet 18 feet 22 feet 30 feet Copyright 2005 Ted "Smitty" Smith

Question 6 answer C. 22 feet 210.6(D)(1)(a) Copyright 2005 Ted "Smitty" Smith

Question 7 High voltage conductors in tunnels shall be installed in metal conduit, other metal raceway or type _____________ cable. A. AC B. NM C. SO D. MC Copyright 2005 Ted "Smitty" Smith

Question 7 answer D. MC 110.53 Copyright 2005 Ted "Smitty" Smith

Question 8 Outdoor mobile home disconnecting means shall be installed so the bottom of the enclose containing the disconnecting means is not less than _________ above the finished grade or working platform. A. 2 feet B. 6 feet, 7 inches C. 10 feet D. 12 feet Copyright 2005 Ted "Smitty" Smith

Question 8 answer A 2 feet 550.32(F) Copyright 2005 Ted "Smitty" Smith

Question 9 Where the positive polarity of a dc system does not serve as the connection point for the grounded conductor, each positive ungrounded conductor shall be identified by:[ Select the answer that is incorrect.] A. a continuous red outer finish B. a continuous red stripe durably marked along the conductors entire length on insulation of a color other than green, white, gray or black C. a continuous red stripe durably marked marked along the conductors entire length on insulation of a color other green, white, or gray. D. imprinted plus signs (+) or the word POSITIVE or POS durably marked on insulation of a color other than green, white, gray or black. Copyright 2005 Ted "Smitty" Smith

Question 9 answer C. a continuous red stripe durably marked marked along the conductors entire length on insulation of a color other green, white, or gray. Missing that it can not be black wire 210.5(C) (2) (a) (1-3) Copyright 2005 Ted "Smitty" Smith

Question 10 Where connected to a branch circuit supplying two or more receptacles, a 20 ampere rated branch circuit shall be allowed to supply ______________ rated receptacles. A. 15 ampere receptacles B. 20 ampere receptacles C. Both A and B D. Neither A or B Copyright 2005 Ted "Smitty" Smith

Question 10 Answer C. Both A and C 210. 21 (B)(3) Copyright 2005 Ted "Smitty" Smith

Question 11 The minimum feeder conductor size shall have an allowable ampacity not less than the maximum load to be served after the application of _________________________. A. any adjustment or correction factors. B. temperature derating adjustments in accordance with 310. 71 C. conduit fill derating corrections based on Table 5 D. continuous duty rating of loads based on 210.11 Copyright 2005 Ted "Smitty" Smith

Question 11 Answer A. any adjustment or correction factors. 215.2(A)(1)(b) Copyright 2005 Ted "Smitty" Smith

Question 12 Vegetation such as trees may be used for support of overhead conductor spans if the attachment point is at least 8 feet above the ground and secured with a device listed for the purpose. A. True B. False Copyright 2005 Ted "Smitty" Smith

Question 12 Answer B. False 225.6 Copyright 2005 Ted "Smitty" Smith

Question 13 The grounded conductor for a service feeder shall not be smaller than the minimum size as required by ___________________. The authority having jurisdiction 250.24(C) The electrical engineer None of the above Copyright 2005 Ted "Smitty" Smith

Question 13 answer 250.24(C) 230.42(C) Copyright 2005 Ted "Smitty" Smith

Question 14 The equipment branch of the Essential Electrical System of a health care facility shall be installed and connected to the alternate power source such that the equipment is automatically restored to operation at ________________. A. no more than 10 seconds from loss of power B. no more than 30 seconds from loss of power C. no more than 2 minutes from loss of power D. at appropriate time-lag intervals following the energizing of the essential electrical system. Copyright 2005 Ted "Smitty" Smith

Question 14 answer D. at appropriate time-lag intervals following the energizing of the essential electrical system. 517.34 Copyright 2005 Ted "Smitty" Smith

Question 15 At least one receptacle shall be installed at each peninsular countertop space with a long dimension of 24 inches or greater and short dimension of __________ inches or greater. A. 6 B. 9 C. 12 D. 18 Copyright 2005 Ted "Smitty" Smith

Question 15 Answer C. 12 210.52(C)(3) Copyright 2005 Ted "Smitty" Smith