Mandala Lightserve Lighting Controller Presenter: Jim Bulmer

Agenda Lightserve benefits Setup and Test Procedure Contacts for Technical Support Wiring Diagrams

Lightserve offers: Energy savings: Lights off during day Maintenance savings Longer lamp life Group relamping based on operating time No photocells to maintain

Laptop for Setup Adjust all setpoints Read Lamp Hours and other data Software free from Mandala

SAFETY FIRST Lightserve rated for Zone 2 (Class 1 Div 2) BUT your laptop is NOT! Don’t plug in unless area Non-Hazardous

Connect Lightserve to Laptop Serial cable from Lightserve to Laptop Click on “Start” icon, then choose “Lightserve” from list If bad connection, tighten connectors, then restart program See Troubleshooting Guide if can’t connect

Serial via USB Some newer laptops don’t have serial ports Need USB to Serial Converter Cable AE9879-ND Converter AE10288-ND http://dkc1.digikey.com/ca/digihome.html Also download drivers

Main Screen Hours alarm setpoint Clock Hour counter and reset Reset when new lamps installed

Solstice Screen Set up for location Ensure Ft. McMurray selected Normally no need to change numbers

Comm Screen Shows communication statistics Use to debug link between Lightserve and programmer

Lights Screen How long should the lights stay on after sunrise? How long before sunset should the lights come on? If too cold, lights always on.

Maintenance Screen Software revisions Total hours, no reset Date of last hours reset Bypass count Temperature

To Test Lightserve: Change clock to simulate passage of time: Change time zone on Laptop Sync Lightserve clock to Laptop (on Main) Change time zone on Laptop back to normal Sync Lightserve to Laptop

To Test Relamp: Go to Main screen Set Relamp Hours Setpoint to Zero Relamp light should come on Set Relamp Hours back to proper value Default is 20,000 Hours

To Test, Do NOT: Change Solstice Setpoints Change location

Technical Support 7 days a week, 7 AM to 10 PM Jim Bulmer, (780) 922-3693 (direct) Main office (780) 922-3000 Jbulmer@incentre.net

Wiring Diagram

Agenda Lightserve benefits Setup and Test Procedure Contacts for Technical Support Wiring Diagrams

Conclusion Don’t be shy… Call for Tech support Thank you