ABB i-bus® KNX The new I/O-Actuators IO/S 4.6.1.1 and IO/S 8.6.1.1 Intelligent Building Control ABB i-bus® KNX The new I/O-Actuators IO/S 4.6.1.1 and IO/S 8.6.1.1 Bild: 2CDC071038S0012+2CDC071039S0012 © ABB STOTZ-KONTAKT GmbH 2CDC 505 143 N0201 | page 1

ABB i-bus® KNX The new I/O-Actuators IO/S 4.6.1.1 and IO/S 8.6.1.1 „ Internal Link“ between in- and outputs the new kind of internal to switch no group addresses necessary functions as an „internal“ wiring directly set in the parameters addition to the normal KNX programming possible Bilder: ABB-064, 2CDC071038S0012, 2CDC071039S0012 © ABB STOTZ-KONTAKT GmbH 2CDC 505 143 N0201 | page 2 2

ABB i-bus® KNX The new I/O-Actuators IO/S 4.6.1.1 and IO/S 8.6.1.1 Benefits during the planning stage worldwide use compact design a standard solution for many projects Bilder: Investor Broschuere_2CDC500046B0101-31 © ABB STOTZ-KONTAKT GmbH 2CDC 505 143 N0201 | page 3 3

ABB i-bus® KNX I/O-Actuators Overview and function © ABB STOTZ-KONTAKT GmbH 2CDC 505 143 N0201 | page 4

ABB i-bus® KNX: I/O-Actuator Overview In-/Outputs IO/S 4.6.1.1 IO/S 8.6.1.1 Inputs Binary via contact scanning* 4 8 Outputs Switch contact 6 A *all inputs have the same potential IO/S 4.6.1.1 IO/S 8.6.1.1 Bilder: 2CDC071038S0012, 2CDC071039S0012 © ABB STOTZ-KONTAKT GmbH 2CDC 505 143 N0201 | page 5 5

ABB i-bus® KNX: I/O-Actuator In-/Outputs functions IO/S 4.6.1.1 IO/S 8.6.1.1 Function of the inputs a…d a…h Switch sensor  Value / forced  Function are supported IO/S 4.6.1.1 IO/S 8.6.1.1 IO/S 4.6.1.1 IO/S 8.6.1.1 Function of the outputs A…D A…H Time Staircase   Function are supported Bilder: 2CDC071038S0012, 2CDC071039S0012 © ABB STOTZ-KONTAKT GmbH 2CDC 505 143 N0201 | page 6 6

© ABB STOTZ-KONTAKT GmbH 2CDC 505 143 N0201 | page 7