68-76 Pocket Goniometer PGX Quick Start Guide 68-76 Pocket Goniometer PGX GM Pro 7.4
Double-Click on GraphMaster Activate the device Double-Click on GraphMaster
Activate the device Click on Add Device
Activate the device Type the model “68-76”
Activate the device Click on Install
Activate the device Click on Yes
Activate the device Click on Yes
Activate the device
Plug the USB cable in a free port Activate the device Plug the USB cable in a free port
Activate the device Click on Next
Activate the device Click on Finish
Double click on 68-76 Pocket Goniometer PGX Collect the tests Double click on 68-76 Pocket Goniometer PGX
Collect the tests Click on Yes
The software is waiting the Calibration Sphere Collect the tests The software is waiting the Calibration Sphere
Place the instrument on the calibration plate Collect the tests Place the instrument on the calibration plate
Place the instrument on the calibration plate Collect the tests Place the instrument on the calibration plate Don’t move the instrument during the calibration
Click on Start
Click on Save
Select Static
Click Open
Fill the identification Collect the tests Fill the identification
Set the test parameters Collect the tests Set the test parameters
Collect the tests Click OK
Adjust position cannula Collect the tests Run the tests Adjust position cannula
Collect the tests Click on Start
Insert the tubing and fill the instrument with the test liquid Collect the tests Insert the tubing and fill the instrument with the test liquid
Insert the tubing and fill the instrument with the test liquid Collect the tests Insert the tubing and fill the instrument with the test liquid Place the instrument on test surface
Click on New Test or Exit To save the data
Collect the tests Click on Yes