Roadware MICRODOWELING Technology Hybrid Urethane Concrete Repair.

Slides:



Advertisements
Similar presentations
Brick and Tile. One of the oldest building materials Manufactured of bricks still follows the same basic procedures Manufactured of bricks still follows.
Advertisements

DECORATIVE SINGLE COAT PLASTER FOR MARBLE CHIPS CLADDING SYSTEM ( PEBBLEDASH )
Adhesives for LSE substrates. Joining Methods Non structural (
Sample Problem 4.2 SOLUTION:
The final test for any adhesive is that it should give joints which are strong and durable. Although ways do exist of assessing the quality of joints.
Concrete Technology Finishing Concrete Joints in Concrete Lecture 20
Concrete Construction Part 1
Fisica Generale - Alan Giambattista, Betty McCarty Richardson Copyright © 2008 – The McGraw-Hill Companies s.r.l. 1 Chapter 10: Elasticity and Oscillations.
1 Fundamentals and Application of Stress Ratio in Concrete Pavement Design Edward H. Guo Consultant April , 2012 FAA Working Group Meeting.
Neptune Research Inc. Introduction For more than 25 years, Neptune Research Inc. has focused its strategic research initiatives on the development, manufacturing.
Ms Ikmalzatul Abdullah BITUMINOUS MATERIALS. Definitions: Binder: A material used to hold solid particles together, i.e. bitumen or tar. Bitumen: A heavy.
Curing and Protection of Concrete
PART 8 BITUMINOUS MATERIALS
Mechanical properties of dental material
Manufacturing Technology
1470 NW 107 th Ave Suite E, Miami, FL Phone:
High Temperature Composites Rutgers University Federal Aviation Administration Advanced Materials Flammability Atlantic City, NJ October 24, 2001.
Materials Engineering – Day 2
By David Sheil Wood manufacturing and finishing 2013.
Prepared by: Marcia C. Belcher Construction Engineering Technology
Volumetric Change of Repair Materials Low Shrinkage Materials.
MECHANICAL PROPERTIES OF MATERIALS
Strength of Concrete.
New Water-Based Amine Technology for Epoxy Application Over Green Concrete
Lecture # 6 Mechanical Properties of Metals Intended learning Outcomes: After the end of this lecture the student should be able to: Define stress –strain.
AN INTRODUCTION TO: from the leading resource for education and information in the repair industry... TECHNICAL GUIDELINE S Guideline for Verifying Field.
1Furmanite Confidential - 1/9/04 Motor and Pump Base Foundational Repair.
Course No: CE 4000 INVESTIGATION ON THE PERFORMANCE OF BAMBOO REINFORCED CONCRETE BEAMS Supervised By: MUHAMMAD HARUNUR RASHID Presented By: MOHAMMAD TAREQ.
Presented by: Peter Emmons,
© 2009 Industrial Services and Consultancy. All rights reserved. Prakash Somji (Col. Retd.), Founder & CEO
BondChem TECHNICAL DATA Roll-a-crete ( Three Component Cementitious Waterproof Coating ) Page 1 / 2. DESCRIPTION BondChem’s Roll-a-crete is a three component.
By: Anthony Disbrow, and Tyler Ista ENG 45 SRJC 12/13/06.
TED 316 – Structural Design
Forging new generations of engineers. Properties of Materials.
The Cathedral of Our Lady of the Angels. Los Angeles, California Rafael Moneo.
AASHTO/NTPEP Polymer Concrete Overlays for Bridges and Pavements (PCO)
© Pearson Education Limited, Copying permitted for the purchasing institution only. This material is not copyright free. Painting and Decorating.
LiquiGard ™ Firestone Building Products. LiquiGard ™ About Firestone LiquiGard™ is a tough, liquid applied, two-part polyurethane adhesive. It forms a.
Design of Concrete Structure I Dr. Ali Tayeh First Semester 2009 Dr. Ali Tayeh First Semester 2009.
Destructive Examination & Testing 2 Destructive Examination Destructive Examination renders the weld or material unfit for further service.
LTPP Lessons Learned: Delaware SPS-2 Wednesday April 9, 2014 SPS-2 Tech Day, Dover, DE Gabe Cimini Project Manager, LTPP North Atlantic Regional Support.
INFLUENCE OF PHYSICS OF TABLET COMPRESSION
CONSTRUCTION MATERIALS
Mechanical Properties of Materials
Horticulture II - Landscape UNIT C LANDSCAPE INSTALLATION AND MAINTENANCE.
Prism compressive strength f cp The compressive strength of 150×150×300mm prism, cured in standard condition, 28 days. The relation of prism compressive.
Concrete Field Sampling
Quiz April.
Engineering materials. Materials and civilization Materials have always been an integral part of human culture and civilizations.
Mechanical properties of dental biomaterials 2
Hussam Khalid Al Mubarak Abdullah Nasser Al Motairi Omar Al Shalhoub
Dental Materials I Lesson I: Properties. Agencies: American Dental Association (ADA) Food and Drug Administration (FDA) Federation Dentaire Internationale.
TRANSMISSION AND DISTRIBUTION
Technical Seminar on, LIQUID ARMOR By- Gokul Raghunandan 1BM07ME036 Under the guidance of Dr. S. SRINIVAS.
High Performance Concrete. Content Introduction What is High Performance Concrete? Application Objectives General Characteristics Advantages Limitations.
2016 SUBSTRATE PREPARATIONS. SUBSTRATE PREPARATION METHODS FOR CONCRETE Very Course Profile Scabbling – Suitable for very aged, weak or contaminated substrates.
Product and Application Overview. Soff-Cut was founded in 1988 the inventor was a concrete contractor himself He persevered in designing a cutting process.
SILEX™ Power Placement
Concrete Bridge Decks Large Percentage of All Bridge Decks (over 90%)
Table 4. Mechanical properties of repair and substrate concrete
Visit for more Learning Resources
Material Testing under Tension
Lightweight Concrete Lightweight Aggregate Concrete
Dr. Omar S.M.J.Ali PhD Orthodontic
Liquid or Dye Penetrant Inspection.  Liquid (or dye) penetrant inspection is an extension of visual inspection and is used for detecting surface- breaking.
إختبار وتقييم المنشآت الخرسانية
RCC UNIT-12 Prestressed Concrete
Influence of properties of coarse aggregate
Willamette Valley Company
Presentation transcript:

Roadware MICRODOWELING Technology Hybrid Urethane Concrete Repair

Roadware History Established 1991 in Minnesota Instrumental in Providing Performance Based High-speed Concrete Repair Products Corporately Over 50 Years Product Development and Field Application In: –Highway –Industrial –Commercial

What is MICRODOWELING?

Technical Data Summary 72F72D Compressive Strength (w/sand)4500psi Elongation:6% Tensil Strength4475psi Bond Strength, Cal psi Viscosity (at application)9 cps V.O.C. (Mixed):5.5 g/l Solids:98% Cured Color (not exposed to sunlight)Gray

Technical Data Summary 72F72D Compressive Strength (w/sand)4500psi Elongation:6% Tensil Strength4475psi Bond Strength, Cal psi Viscosity (at application)9 cps V.O.C. (Mixed):5.5 g/l Solids:98% Cured Color (not exposed to sunlight)Gray

Surface Tension A measurement of the ability of a liquid to overcome its own internal friction and penetrate into a material like concrete.

Surface Tension Roadware 10 Minute Concrete Mender has a surface tension three times less than water.

Surface Tension Fluid Surface Tension (N/m) Water at 20°C Ethanol Benzene Glycerin Mender Part A0.026 Mender Part B0.026 Mender sec after mixing0.026

Viscosity of Concrete Mender (Time zero = time of ejection from nozzle)

Viscosity of Concrete Mender (Time zero = time of ejection from nozzle)

Why it Works Superior Bond Strength Ease of Application Shrinkage Modulus of Elasticity

Superior Bond Strength Mechanical Interlock with Microstructure of the Substrate –Measured with Scanning Electron Microscope Concrete Beam Fractured Realigned with 1/8 Gap Mender Applied Specimen Was Sawed to Isolate Small Samples

Superior Bond Strength

Why it Works Superior Bond Strength Ease of Application Shrinkage Modulus of Elasticity

Ease of Application Viscosity –Related to The Ease of Which Individual Molecules of the Liquid Can Move With Respect to Each Other –Measured As a Function of Time Brookfield Viscometer

Ease of Application (Time zero = time of ejection from nozzle)

Ease of Application Concrete Mender Easily Wetted the Surface of Concrete –Mender Is Drawn Into the Concrete Pore Structure by Capillary Tension –Significant Penetration Occurs Within Minutes of Contact.

Ease of Application LiquidViscosity at 25C (cP) Methanol0.55 Benzene0.65 Water1.0 Ethanol1.2 Concrete Mender9.0 Ethylene Glycol16 Glycerin1490

Why it Works Superior Bond Strength Ease of Application Shrinkage Modulus of Elasticity

Shrinkage International Concrete Repair Institute (ICRI) –Guideline No Shrinkage of 0.05% Is Considered Low

Shrinkage 0.10% Between 1 Hour and 7 Days 0.05% Between 2 Hours and 7 Days Test Was Completed Without Sand Adding Sand Will Proportionately Reduce Overall Shrinkage

Shrinkage

Why it Works Superior Bond Strength Ease of Application Shrinkage Modulus of Elasticity

3-point Beam Deflection Test –Tested to Fracture –Nearly Linear Load-Deflection Until Fracture –Samples Fractured in a Brittle Manner

Modulus of Elasticity Sample Modulus of Elasticity psi (Mpa) Modulus of Rupture psi (Mpa) Neat Concrete Mender137,000 (944)3450 (23.8) Concrete Mender w/ sand (54% vol% sand) 739,000 (5100)3990 (27.5)

Concrete Mender: Summary High Quality Bond Achieved Low Viscosity Low Surface Tension Shrinkage Is Low

Concrete Mender: Conclusion Repairing Cracks With Concrete Mender Largely Restores the Structural Performance of the Original Concrete

Roadware MICRODOWELING Technology Concrete Mender Job Pics

Repairs - Parking Decks Cracks in parking structures and bridge decks can be repaired without destructive cutting and grinding. Only a light scoring with a diamond blade grinder is used to clean out the crack. A wire wheel grinder will work too.

Repairs - Parking Decks Roadware 10 Minute Concrete Mender is flooded deep into the crack and self-injects into the concrete like water into a sponge.

Repairs - Parking Decks Roadware 10 Minute Concrete Mender is flooded deep into the crack and self-injects into the concrete like water into a sponge. Silica sand is added to the surface and excess material is wiped away with a trowel or even a piece of cardboard. The brushed finish is retained. The repair is fully traffic ready in 10 minutes.

Repairs - Parking Decks A core sample of the concrete reveals the level of free penetration of 10 Minute Concrete Mender when photographed under filtered UV light.

Job Pics

Crack Repair Movie

Job Pics Crack is IdentifiedScored and Cleaned out Mender and Sand is Added

Job Pics Crack Being Repaired at Full Depth, Sand Is Added to Stop Sinkers Additional Material Is Added to Fill the Crack Up Excess Material is Troweled and Scraped

Job Pics After 10 Min. The concrete is ready. A grinding stone is used to blend the repair Mender Blender can be added to cover the repaired slab Completed Repair

Roadware MICRODOWELING Technology Hybrid Urethane Concrete Repair