<month year> doc.: IEEE 802.15-03/119 September, 2003 Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [Proposed Technical Requirements for mm-Wave WPAN ] Date Submitted: [ 15 September 2003] Source: [Yuichi Shiraki] Company [Oki Electric Industry Co., Ltd.] Address [3-4 Hikari-no-oka, Yokosuka, Kanagawa 239-0847, Japan] Voice:[+81-46-847-5148] Fax :[+81-46-847-5149] E-Mail:[shiraki492@oki.com] Re : [] Abstract:[Description of Proposed technical requirements for mm-Wave WPAN ] Purpose:[Contribution for millimeter-wave interest group ] Notice :This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15. Yuichi Shiraki Oki Reed Fisher, Oki

Proposed Technical Requirements for mm-Wave WPAN September, 2003 Proposed Technical Requirements for mm-Wave WPAN Yuichi Shiraki Oki

mm-Wave WPAN System PHY Requirements (1) <month year> doc.: IEEE 802.15-03/119 September, 2003 mm-Wave WPAN System PHY Requirements (1) TG3a Alt-PHY Technical Requirements (IEEEP802.15-02/371) mm-Wave WPAN System 110Mbps@10m 200Mbps@4m 480Mbpsor more (range not specified) Several Gbps@10m for Point to Point Bit Rate and Range Transmission EIRP Less than Regulatory emission level Less than Regulatory emission level Coexistence and Interference Resistance Coexistence with other 802, Bluetooth,etc Robustness in multipath (indoor) Uncomplicated coexistence with other 802 systems including TG3a , Bluetooth,etc Coexistence among mm-Wave System Robustness in multipath (indoor) Channel model Specified by IEEE P802.15-02/368 To be specified with experimental investigations Yuichi Shiraki Oki Reed Fisher, Oki

mm-Wave WPAN System PHY Requirements (2) <month year> doc.: IEEE 802.15-03/119 September, 2003 mm-Wave WPAN System PHY Requirements (2) TG3a Alt-PHY Technical Requirements (IEEEP802.15-02/371) mm-Wave WPAN System 100mW or less @100Mbps 250mW or less @200Mbps Power save function To be specified Power consumption Capable of fitting into a form factor consistent with a camera,PDA,etc Capable of fitting into a form factor consistent with a camera,PDA,etc Form factor Complexity Minimal to enable mass commercial adaptation for cost sensitive products Minimal to enable mass commercial adaptation for cost sensitive products Supplements to 802.15.3 functionality Alt-PHY operates with the 802.15.3 MAC without fundamental changes. (Supplements can be added which expand the capability of the system.) Alt-PHY operates with the 802.15.3 MAC without fundamental changes. Yuichi Shiraki Oki Reed Fisher, Oki

mm-Wave WPAN System PHY Requirements (3) <month year> doc.: IEEE 802.15-03/119 September, 2003 mm-Wave WPAN System PHY Requirements (3) TG3a Alt-PHY Technical Requirements (IEEEP802.15-02/371) mm-Wave WPAN System Comply with necessary geopolitical or regional regulations Comply with necessary geopolitical or regional regulations Regulatory Other item directionality of antenna Assumption of Omni-directional antenna No exclusion of directional antenna if needed to mitigate specific user problems Yuichi Shiraki Oki Reed Fisher, Oki

<month year> doc.: IEEE 802.15-03/119 September, 2003 Conclusion Proposed mm-Wave WPAN technical requirements have been presented. More detailed specifications will be presented at the next mmWIG meetings Yuichi Shiraki Oki Reed Fisher, Oki