XC-RF850-FCW Wiegand Demo XC-RF850 FCW with data cable Invengo RFID Demo App v. 1.3.4 or later Wiegand Controller Wiegand Controller Software Wiegand Controller Help 12V Power Supply (I used MW97/A-27253)
Links from the previous slide just in case http://www.invengo.com/rfid-product-line/readers-antennas/rain-rfid-uhf-readers/xc-rf850-integrated-reader/ http://www.invengo.support/downloads/FAE/Demo Application and software/RFID-Demo-ver-1.3.4.rar https://www.amazon.com/gp/product/B00UX02DI4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 http://www.wiegand.com.cn/soft/soft_all_32/MJ_all_en.rar http://www.wiegand.com.cn/soft/soft_all_32/help/help_en.rar
XC-RF850-FCW Wiegand Demo Wiring
Configureing the Invengo RFID Demo App
XC-1003 – reading tags
Slow down the read rate using “Repeatedly acquire tag data filter time period” and configuring Session to “S1” and Target to “A”.
Enable Wiegand, configure the Port, Mode, Antenna and Pointer can click on [Configure].
Access Control Software Download and unzip MJ_all_en.rar Double click on AccessControlV7.83en/setup.exe to install the software Go to C:\AccessControl and click on N3000.exe to run the app User Name: abc Password: 123
Access Control Software Click on “1. Add Controllers By Searching” When the controller is found (in blue) click on [Add Found To Database] Once it is added, click on [Close]
Access Control Software Click on [Operation], click on the icon representing the door (m001-1) then click on Monitoring to begin looking for tag reads.
Start Scanning Click on [Scan] to start reading. Present a tag to the reader.
Success! Tag reads should appear in the box in yellow.