Fire Hose, Nozzles, Streams, and Foam 16 Fire Hose, Nozzles, Streams, and Foam

Introduction Instructor Introduction Topic Introduction Class objectives References Preparation Step Information

Skill Drill 16-14 Performing a Self-Locking Twin-Doughnut Roll (1 of 3) 1. Lay the hose flat and bring the couplings alongside each other. 2. Move one side of the hose over the other, creating a loop. This loop is the carrying shoulder loop.

Skill Drill 16-14 Performing a Self-Locking Twin-Doughnut Roll (2 of 3) 3. Bring the loop back toward the couplings to the point where the hose crosses. 4. Where the hose crosses, roll the hose toward the couplings with the loop as its center.

Skill Drill 16-14 Performing a Self-Locking Twin-Doughnut Roll (3 of 3) 5. On completion of the rolling, position the couplings on the top of the rolls. 6. Position the loops so one is larger than the other. Pass the larger loop over the couplings.