MVB Assembly Instructions ©  All Rights Reserved to Mifram Ltd. 2018

Set of 8 MVB

About the MVB The Original modular vehicle barrier When assembled units vertical element is impacted, it diverts the horizontal momentum into the ground. The placement of the MVB is crucial. The Pictures demonstrate the correct orientation of the units The open side of the L shaped unit is the side to face the threat and receive the impact

Mobillization

Orientation of Elements in direction of potential threat (Open side of L shape) in direction of potential threat Direction of Potential Threat MVB Deployment

Safety Warning Note that several parts are heavy (21 kg) and sharp. pay attention during unloading, assembling and packing Elements Placed upright prior to being joined can fall on their side and create a hazard

Assembly instructions MVB Deployment

Recommendations Deployment: If possible, Deploy the MVB where the ramming car will be in the lower speed by using nature obstacles like carves etc. Block road sides and side walks. Use warning lights and signs

System components

System components

System components

Unit’s Deployment

Pull out the safety pin

Pull out the yellow pin

Lift the upper part and insert the yellow pin

Reinsert the safety pin

Pull out the safety pin from mobile arm

Pull out the yellow pin

Lift the left mobile arm

Insert the yellow pin, as shown

Reinsert the safety pin in the rear

Pull out the safety pin from the lower mobile arm

Join the mobile arm with the unit on the side

Reinsert the safety pin the below

Result

Assembling of the mobile system Start from the right side Insert the mobility rod as shown Insert the rod, making sure the bolt is align with the groove

Assembling of the mobile system

Assembling of the mobile system Insert the rod, making sure the bolt is align with the groove

Finish mobility rod insertion

Insert the next mobility rod, the same way

Insert safety pin

Lock the safety pin

Repeat the above steps as needed in order to get required barrier width

Insert additional black bolt nearby the handle

Add end unit at side opposite the handle

Insert additional black bolt in the End unit

Insert the left side handle (option)

Insert the right side handle and secure it

Please contact us Thank you for purchasing Mifram MVB-3X. with any question or information you may have. Our customers support is happy to help you. +972.4.880.8800 sales@mifram.com www.MiframSecurity.com ©  All Rights Reserved to Mifram Ltd. 2018