Ethernet Cable Local Area Networks.

Slides:



Advertisements
Similar presentations
How to wire Ethernet Cables. Tools Required CAT 5 Cable - bulk Category 5, cable RJ45 Ends Crimper for RJ45 Wire Cutters - to cut and strip the cable.
Advertisements

Ethernet Cable Local Area Networks, 2009 Spring. Outline Introduction Ethernet Cable Category How to wire Straight through Crossover Reference 2 Ethernet.
How to Make a Straight-through Cable
Crimping Get the pinouts for the desired connector and application. 2.Identify the proper connector and the associated pins for your application.
IST IT Services Intern Program Quiz Lessons Summary Links Home How to Make Network Cables In this lesson you will: –Determine what length cable is needed.
HOW TO MAKE UTP CAT-5/5e CABLE
Building a T568B Network Cable Examples of good and bad cables Identification of components Critical areas of cable.
+ Straight-Through Cable Construction Lab 4. + Data Transmission In data transmission system, the transmission medium is the physical path between transmitter.
Page 1 - © Richard L. Goldman Networking Topology ©Richard L. Goldman January 8, 2002.
Connections. SERIAL DATA Serial Terminals Serial connections Telecommunication History 101  RS-232 DTE – Data Terminal Equipment  Teletype  Computer.
Hands On: Cutting and Connectorizing UTP Chapter 3a Panko’s Business Data Networks and Telecommunications, 6 th edition Copyright 2007 Prentice-Hall May.
Infrastructure and components. Cable The cable and components used in structured cabling systems is defined in the standards –EIA/TIA 568 x There are.
CS335 Networking & Network Administration Thursday April 1.
Network Cabling. Introduction Cable is the medium through which information usually moves from one network device to another. There are several types.
Prof. Alfred J Bird, Ph.D., NBCT Door Code: 52461* Office – McCormick 3rd floor 607 Office Hours – Monday and Thursday 3:00PM to 3:45PM.
How to Identify an RJ-45 Cable To identify the RJ-45 cable type, hold the two ends of the cable next to one another so you can see the colored wires inside.
The making of Ethernet Standards For the Ethernet Cabling & PoE (power-over-Ethernet).
BASIC TELECOMMUNICATIONS
Crafting a Cat5e Cable Scott H. Bowers. Materials Raw Cat5e cable ~50 feet. Wire Cutter/Cable Stripper RJ-45 Crimper Ethernet tester RJ-45 terminators.
How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.
1 PATCH CORDS BASIC TELECOMMUNICATIONS. 2 Telecom Cabling Even with the advent and deployment of wireless technology, with its inherent problems of size,
1 Project # 2 Steve Klesper Tom Ondick Garry Meadows Aaron Hurt Tim Wade.
NETWORK CABLING Chapter 2
Component 9 – Networking and Health Information Exchange Unit 2-2 Network Media and Hardware Communication Devices This material was developed by Duke.
The Saigon CTT Semester 1 CHAPTER 5 Le Chi Trung.
Crossover Cable Construction
Modern Ethernet Chapter 6. Contents Define the characteristics, cabling, and connectors used in 10BaseT and 10BaseFL Explain how to connect multiple Ethernet.
Copper Media Describe the specifications and performances of different types of cable. Describe coaxial cable and its advantages and disadvantages over.
PREPAIR BY :  MOHD SHARIFUDDIN B SAHABUDIN  12DEP11F11006  IMAN BT ABDULLAH  12DEP11F1002  MUHAMMAD MUIZZUDDIN BIN ZAINOL ABIDIN  12DEP11F1003 
سليمان صلاح أبوطير عمر جهاد الحايك محمد كمال المدهون رشدي أديب حميد محمد نهيل العثماني محمد أسعد أبوالكاس فاطمة طاهر لولو فاطمة طاهر لولو.
Module 3: Networking Media Safe Handling and User of a Multimeter Voltage Measurement Resistance Measurement Series Circuits 3.1.9a.
Making and Testing Cat 5 Cables. EIA/TIA-568A and 568B Straight Through and Crossover Cables EIA/TIA-568 Commercial Building Telecommunications Wiring.
Chapter Three The Highways and Byways of the Network.
Project On Ethernet Cable Building & Video Recording James Maclean & Stephen Craig.
Ethernet Cable. Straight Through Connection  I went ahead with the Straight through connect for my first few cables, using the T-568A wiring standard.
Page 1 - © Richard L. Goldman RJ-45 Termination ©Richard L. Goldman June17, 2002.
Network Anatomy By: Roland J. Boutte. Ethernet Cable cable used to connect computing devices together directly. two hosts or two switches to each other.
Day 5 Wires. Why wire? Conducts Electricity and directs it to a location. Cheap! Easy to run.
Chapter 2.  Upon completion of this chapter, you should be able to:  Select & install cables for connecting to a dial-up network  Select & install.
How to Make an Ethernet CAT5 RJ45 Crossover Cable
Chapter 5a. 5a-2 Single Twisted Pair Jacket Four pairs (each pair is twisted) are enclosed in a jacket. Copyright 2011 Pearson Education, Inc. Publishing.
Network Tools and Cabling. Network Tools RJ means "Registered Jack" This is a plastic connector that looks like a large telephone-style connector. Used.
How to Create RJ – 45 Wire.   To create the RJ – 45 cable or better known as the Cat wire it is very simple all you need to do is follow my simple instructions.
Creating an Ethernet Cable By Daniel Baxter. Step 1: Gathering the Materials When I started the class in August one the first things I did was order the.
Skip 6 positions from the high end. Locate Pin #1 Crimp the cable with one end extending 9 1/2” to the left and 4” to the right. Separate the wires in.
Wildland Fire Information and Technology Making and Testing Cat 5 Cables.
David Rodriguez.  Use protective glasses  Be careful of sharp tools  Have first aid-kit near by  Familiarize yourself with surroundings.
T. Hajer Brahim & T. Rania Alakazalah U.Y: 1435/1436 H.
পরিচিতি Hardware Maintenance & Troubleshooting A+ Core Hardware Motherboard Processor Ram BIOS and CMOS H.D.D. ( Hard Disk Drive) Floppy Drives Laptop.
Lecture 2 unit 1.
How to wire Ethernet Cables. Tools Required CAT 5 Cable - bulk Category 5, cable RJ45 Ends Crimper for RJ45 Wire Cutters - to cut and strip the cable.
ETHERNET CABLE TYLER THORNBURG LTEC STRIPPING AND CUTTING First you will need to strip the wire. I used scissors to cut off the rubber around.
Understand Network Media Types Part 2 LESSON 2.3_B Networking Fundamentals.
Constructing/Testing 4-Pair Cabling Systems
(Use a lined sheet for paper ) Objective: To Learn about networking
Lab#1 UTP cables.
CREATING A 568A, 568B, OR CROSSOVER CABLE Creator:Dennis Groseclose
How to wire Ethernet Cables
Making an Ethernet Cable
Hands On: Cutting and Connectorizing UTP
SKYLINE SKYLINE HAS CHANGED THE WAY THE POLEBOX CARD SHOULD BE WIRED AND ALL FUTURE NEW INSTALLS WILL BE DONE THIS WAY. IF YOU GO TO A SITE TO WORK ON.
Hands On: Cutting and Connectorizing UTP
Lab#1 UTP cables.
Lecture 3 LAN Transmission Media
Fundamentals of Computer Networks
Fall 2013 Networking Presentation
Hands On: Cutting and Connectorizing UTP
LAN Cabling CCNA Instructor Training Course October 12-17, 2009
LESSON NO:11 Network Cabling Making connections with Cat5 Way cool! SMI-Lecturar Samreen Javed.
ABOUT ME AND THE CLUB I AM A FUN AND LOVING PERSON I LIKE PEOPLE
Presentation transcript:

Ethernet Cable Local Area Networks

Outline Introduction How to wire Reference Ethernet Cable Category Straight through Crossover Reference 2019/1/2 Ethernet Cable

Ethernet Cable The name, Ethernet Cable, always refers to the following category: Category 5 Category 5e Category 6 Or more than those categories. 2019/1/2 Ethernet Cable

Category Category Data Rate Signal Frequency Standard Cat5 100 Mbps 100 MHz TIA/EIA Cat5e 100 Mbps /1 Gbps TIA/EIA-568-B Cat6 1Gbps / 10 Gbps 250 MHz Cat6a 500 MHz ANSI/TIA/EIA-568-B.2-10 TIA/EIA is a set of three telecommunications standards from the Telecommunications Industry Association. 2019/1/2 Ethernet Cable

Ethernet Cable It is composed of 4-pair twist wirings. Orange Green Blue Brown Cat5e cable http://www.cat5ecable.co.uk/ 2019/1/2 Ethernet Cable

Ethernet Cable Color Pin (T568B) White/Orange 1 Orange 2 White/Green 3 Blue 4 White/Blue 5 Green 6 White/Brown 7 Brown 8 You can use the order of rainbow colors to memorize the order of this wiring. 2019/1/2 Ethernet Cable

Ethernet Cable Pin Usage 1 Transmission (Tx+) 2 Transmission (Tx-) 3 Receive (Rx+) 4 -- 5 6 Receive (Rx-) 7 8 We can use the concept to justify the order of the wiring colors of straight through and crossover. 2019/1/2 Ethernet Cable

How to wire Prepare the materials and tools. Cable & RJ-45 plugs Scissors Crimping tool For RJ-45 plug. Crimping tool 2019/1/2 Ethernet Cable

How to wire Strip off suitable length of the cable sheath. About 2-2.5 cm You can mark the position first. 2019/1/2 Ethernet Cable

How to wire Align the colored wires according to the specific order. (Later we will talk about.) 1 2 3 4 5 6 7 8 2019/1/2 Ethernet Cable

How to wire Straight Through All order of the wirings is the same as the other side. 1→8 1 2 3 4 5 6 7 8 2019/1/2 Ethernet Cable

Straight Through Host A Host B Pin Usage Color 1 Tx+ 2 Tx- 3 Rx+ 4 -- 5 6 Rx- 7 8 2019/1/2 Ethernet Cable

How to wire Crossover We need to change the order of the transmission and receiving wirings. 1→8 1 2 3 4 5 6 7 8 2019/1/2 Ethernet Cable

Crossover Host A Host B Pin Usage Color 1 Tx+ 2 Tx- 3 Rx+ 4 -- 5 6 Rx- 7 8 2019/1/2 Ethernet Cable

How to wire Trim all the wires to the same length. Ethernet Cable 2019/1/2 Ethernet Cable

How to wire Insert the wires into the RJ45 plug. Ethernet Cable 2019/1/2 Ethernet Cable

How to wire Crimp the RJ45 plug with the crimping tool. Ethernet Cable 2019/1/2 Ethernet Cable

How to wire Verify the order of the wires is correct and all the wires are correctly making good contact with the metal contacts in the RJ45 plug. Correct Incorrect 2019/1/2 Ethernet Cable

How to wire Cut the cable into suitable length and repeat the below steps for the other side. Please be sure what kind of the cable you are wiring. Testing Straight Through Crossover 2019/1/2 Ethernet Cable