Customer Presentation Sensor Series PE2 A new resistant and robust pressure Sensor Customer Presentation

Product Data Measurement Relative pressure, vacuum and overpressure Sensor element Ceramic measuring cell Display OLED display Yellow LED per PNP switch output Pressure ranges -1… +1 bar; 0…16 bar Pmax. 10 bar (for -1 to +1 bar variant) 40 bar (for 0 to 16 bar variant) Display adjustable in bar, mbar, psi, kPa, Mpa, % Electr. connection M 12 x 1, 5-pin Output signals 1x digital (1x PNP) 2x digital (2x PNP) 1x digital (1x PNP) + 1x analog Switching logic Hysteresis function NO/NC (programmable) Window function NO/NC (programmable) Pn. Connection G1/4 or flange connection

Product Data Precision ± 1% (incl. temperature drift) Repeatability ± 0.2% Hysteresis Adjustable Switching and reset delay Adjustable Switching time < 10 ms for loads < 100 kΩ > 10 ms for loads > 100 kΩ Operating voltage 15 to 32 V DC Max. DC switching current 0.5 A Local power consumption < 50 mA Max. load resistance 600 Ω Protection class IP65 Housing material Aluminum (with rotofinishing) Medium Pneumatic oil; hydraulic oil; neutral gases; neutral fluids Short-circuit protection 

Sensor PE2 - Overview M12 connection, 5-pin Operating voltage 15 to 32 V DC 2 LEDs to display switching (per output) Housing: aluminum OLED screen 3 operating buttons Bottom pn. connection: G1/4 or flange connection, depending on version Protection class: IP65

Sensor PE2 - Pin assignments Pin 1: Signal + UB; color: brown Pin 2: Signal Out 2 (PNP)/analog 4-20 mA; color: white Pin 3: Signal 0 V; color: blue Pin 4: Signal Out 1 (PNP); color: black Pin 5: Signal FE; color: gray Output signals

Sensor PE2 - Dimensions G1/4 connection Flange connection Dimensions [mm]

Sensor PE2 - Features - Advantages - Benefits Intuitive menu (in acc. with VDMA) Easy and quick to understand Reduction of operating errors Time and cost reduction Plain text menu Parameters can be set quickly VDMA abbreviations are explained directly on the display No need for time-consuming reading of operating instructions Less time needed for parameterization User-friendly Zero point offset function The zero point can be reset everywhere at any time Flexible use, precise display and switching Monochrome, high-resolution OLED display Easily readable from all angles and in all kinds of lighting Reduced errors during reading and setting Invertible analog signal The analog signal can be inverted simply with one setting in the extended functions. Flexible use, for whatever the customer needs Several pressure units available Do not only use the SI unit pascal, but also: bar, mbar, MPa, kPa, psi, % Can be used worldwide

Sensor PE2 - Features - Advantages - Benefits Aluminum housing Robust housing Suitable for many different applications, also in case of contamination Ceramic measuring cell Durable and robust measuring cell Can be used in a wide temperature range from -10°C to +75°C, abrasion-resistant, high protection against overpressure, long service life Display rotatable by 180° The rotate display function (DISR) is easy to set Can be installed flexibly Error and warning messages Error display with various messages, e.g. Measurement range exceeded/ fallen below Short circuit at switch output Supply voltage exceeded/ fallen below Detect and remedy errors quickly Programmable access protection Protection of the set parameters No undesired changes possible Protection against manipulation

Sensor PE2 - What’s new and what’s improved? Improved zeroing “ZERO” function “Real” zero point correction Affects display, switch points, and analog output signal Max. correction: ±50 mbar at -1 to +1 bar or max. ±160 mbar at 0 to 16 bar Advantages OLED display  Menu structure according to VDMA Plain text menu in DE, EN, FR, IT, ES, and can be switched off Zero point offset function Rotatable display Password protection Aluminum housing