Innovative Thinking. Innovative Products. 2012 New Products Innovative Thinking. Innovative Products.

2012 New Products G550 – Wireless Glassbreak Detector iParadox – Alarm System Control IPR512 (1024) – GPRS/IP Monitoring Receiver IPRS-7 – GPRS/IP PC Receiver Software NV780/NVR780 – Digital Outdoor Dual Side-View Detector with 4x Dual Sensors PCS250 – GPRS/GSM Communicator Module SR120 – Indoor Wireless Siren with Built-In Strobe Light TM50 Touch – Intuitive Touchscreen WC588P – Wireless Carbon Monoxide Detector WH588P – Wireless Heat Detector WS588P – Wireless Photoelectric Smoke Detector

G550 Wireless Glassbreak Detector

G550 Introduction The G550 Wireless Glassbreak Detector is a wireless detector that accurately responds to glassbreak acoustic patterns to provide 360° coverage. Using Sentrol® glassbreak detection technology, the G550 delivers effective coverage of plate, tempered, wired, and laminated glass without the need for complex sensitivity adjustments.

G550 Features Modern & sleek design Supervised wireless detector offered in 433 MHz and 868 MHz Six meter (20 ft.) radius range and 360º coverage pattern protects an entire room with one sensor Detects breaking of different types of glass including plate, tempered, laminated and wired Standard alkaline 3x AAA type battery with low battery supervision Factory-set sensitivity for safer installation Recognizes actual pattern of breaking glass across the full audio band Impact and shock wave analysis High-immunity to RFI and EMI signals Hand-held tester available separately

iParadox Alarm System Control

iParadox Introduction The iParadox app enables users to remotely access their Paradox security system. With arm / disarm control, PGM control, and live system status, iParadox turns any Wi-Fi or 3G iPhone, iPod Touch, or iPad into a remote keypad. Now users can control their Paradox security system from their favorite Apple device!

iParadox Features Multi-site support (up to 4), one connection at a time Remotely arm / disarm system Receive automatic email notification when alarm is activated or when system is disarmed Check the current status of the alarm system Notification of troubles One-touch arm / disarm for all areas – EVO only Bypass zones Displays module label when module trouble occurs – EVO only PGM activation / deactivation* Supports utility keys for PGM activation High-immunity to RFI and EMI signals Connects with static or dynamic IP (ParadoxMyHome) Compatible with EVO192 (V2.20 or higher), and all MGSP control panels (requires IP100 V5.10 or higher) Supports multiple languages (24) *Shows the last PGM action performed from iParadox, not the current PGM state.

IPR512 (1024) GPRS/IP Monitoring Receiver

IPR512 (1024) Introduction The IPR512 GPRS/IP Monitoring Receiver allows up to 1024 supervised control panels (each with up to 32 sub-accounts) to report system events over an IP network via a Paradox reporting module (IP100 Internet Module or PCS Series Modules). The IPR512 communicates with the monitoring stations’ automation software using Radionics 6500, Ademco 685, or Sur-Gard MLR2-DG receiver data formats.

IPR512 (1024) Features 1024 supervised Paradox GPRS/IP modules End-to-end supervision Module polling and receiver supervision Direct communication Redundant Internet Service Provider (ISP) 2 Serial Ports Communication protocols Integrated Account Management web page Data backup on external memory card Firmware upgradable Supports CID and SIA reporting formats 256-bit AES data encryption Output relay (triggered by selected events) Input relay (sends selected events when triggered)

IPRS-7 GPRS/IP PC Receiver Software

IPRS-7 Introduction The IPRS-7 IP/GPRS PC Receiver Software is a desktop application that is specifically designed to emulate the IPR512 IP/GPRS Monitoring Receiver directly from a computer without the need for an actual receiver. The IPRS-7 is a powerful, fast, and user-friendly software that is easy to setup, and is virtually maintenance free. Once installed, the application is seamless and invisible to the user.

IPRS-7 Features Unlimited number of accounts Buffer and manage incoming events (up to 50,000) Selectable input (IP port and GSM/GPRS modem) and output (COM port) Register, display, and manage an unlimited number of accounts Account supervision Security profiles management Monitor GSM/GPRS modem and acknowledge central station on network failure detection Personalized software by using customer logo

NV780/NVR780 Digital Outdoor Dual Side-View Detector With 4x Dual Sensors

NV780/NVR780 Introduction The Paradox NV780 (wired) and NVR780 (wireless) were designed to provide a pre-entry protection solution while keeping the perimeter free for movement without generating false alarms. The NV780/NVR780 provides early warning detection before intruder entry, with excellent exterior/interior wall and window protection. Available in both wired (relay and/or Paradox EVO BUS) and wireless versions (433 MHz or 868 MHz), these rugged indoor/outdoor detectors incorporate two passive infrared side-by-side detectors, each containing two independent dual element sensors, optics, and electronic channels.

NV780/NVR780 Features Advanced Wireless Operation (NVR780 only) Ultra low power management operation with Paradox Effi+ circuit Dual tamper detection (removal of cover or unit) Easy Installation and Setup Single or Dual Zone operation modes: two sides can report to a single zone or to two separate zones Optical and digital range adjustments Bright LED and buzzer indicator for clear adjustment feedback No need for PCB removal Wall mount, with built-in level tool In-field firmware upgradable via serial port

NV780/NVR780 Features Advanced Digital Technology: Two double passive infrared motion detector with eight narrow detection beams, managed by Full Authority Digital Electronics Control (FADEC) High-resolution and full dynamic range digital signal conversion High-speed, advanced algorithm digital signal processing Digital EMI / RFI interference rejection True Pet Immunity, up to 40kg (90lb) Advanced Optical Technology: 4x dual element sensors arrangement High efficiency long focal point (1.77”) lens, providing long-range narrow beams 2 pairs of narrow beams per side provide 2x signals per protected area crossing for increased “catch” and false alarm rejection Combination optics of mirror reflector and 2nd generation Fresnel “LoDiff” Lens Increased white light rejection

PCS250 GPRS/GSM Communicator Module

PCS250 Introduction The PCS250 provides Paradox control panels with wireless communication capabilities to report system events through a GPRS or GSM network to the IPR512 GPRS/IP Monitoring Receiver and/or the IPRS-7 IP/GPRS PC Receiver Software.

PCS250 Features Report events to the IPR512 GPRS/IP Monitoring Receiver via GPRS or to a landline receiver via GSM Report via text message (up to 16 cell phone numbers) Control panel communication supervision. When detected, the control panel will generate a trouble as well as report it to the monitoring station via landline End–user can arm or disarm the system by sending a text message (SMS) to the PCS250 (GSM mode) Send pre-recorded voice messages to up to 8 phone numbers to report alarms using the VDMP3 Paradox Plug-In Voice Module (GSM mode) Simple installation with 4-wire serial connection Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode) Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only (e-bus)). A CTV458 module must be added at the panel in order to accomplish this.

SR120 Indoor Wireless Siren w/ Built-in Strobe Light

SR120 Introduction The SR120 is an indoor, stand-alone, fully supervised wireless siren with built-in strobe light. It uses 2-way wireless communication, which provides continuous supervision between the panel and siren with fast response to alarm signals.

SR120 Features Built-in transceiver 100dB wireless siren Integrated strobe light Fast alarm response time (within 4 seconds) 2.5 hour alarm display Strobe flashes every 4 seconds after bell cut-off Siren presence supervised by control panel Wall tamper protection against removal of unit Assign a total of 4 sirens per control panel (including SR150) Firmware upgradable via 307USB Siren test mode

TM50 Touch Intuitive Touchscreen

TM50 Touch Introduction The TM50 Touch Intuitive Touchscreen allows you to control your Paradox system’s functions through its touchscreen interface. Designed to fit every lifestyle and budget, the TM50 Touch is the keypad you’ve been waiting for.

Available Colors The TM50 Touch is currently available in Crimson Red, Apple Green, Vivid Violet, Royal Blue, Pristine White, and Piano Black

TM50 Touch Features Thin, sleek design Control up to 8 PGM outputs 5.0 in. / 12.7 cm vivid color display (480 x 272 pixels) Intuitive icon-based menus – no manual needed Control up to 8 PGM outputs In-field firmware upgradable via micro SD card Powerful advanced processor 1 zone/temperature input to connect a detection device or a TEMP07 (External Temperature Sensor) Customized translation via web application Surface-mount installation External SD media card slot with cover slip Supports up to 32 floor plans (optional SpotOn LocatorTM), includes SoloTestTM Mode Supports optional OneScreen MonitoringTM feature

WS588P Wireless Smoke Detector

WS588P Introduction The WS588P is a DC operated wireless photoelectric smoke alarm that features a sleek new design, high/stable sensitivity, and a “quick-fix” mounting bracket for easy installation.

WS588P Features One high-sensitivity photoelectric smoke sensor Compact, low-profile design Built-in siren Available in 433MHz or 868MHz Protection against the ingress of foreign bodies / Insect Guard CE and EN 14604 Certified

WH588P Wireless Heat Detector

WH588P Introduction The WH588P Wireless Heat Detector is ideal for kitchens, garages, boiler rooms, and other areas where there are normally high levels of fumes, smoke, or dust. The wireless heat detector is designed to be used as an addition to the WS588P Wireless Smoke Detector.

WH588P Features Fixed temperature heat sensor DC battery operated wireless alarm Compact, low-profile design Built-in siren Available in 433MHz or 868MHz Protection against the ingress of foreign bodies / Insect Guard Anti-tamper sensor Test button LED operation indicator Low battery indicator Easy installation CE certified

WC588P Wireless Carbon Monoxide Detector

WC588P Introduction The WC588P Wireless Carbon Monoxide Detector protects against dangerous levels of carbon monoxide (CO). This detector has an LED operation indicator that displays the color green when there is no CO detected and red when CO is present.

WC588P Features Highly sensitive electrochemical carbon monoxide sensor DC battery operated wireless alarm Compact, low-profile design Built-in siren Available in 433MHz or 868MHz Protection against the ingress of foreign bodies / Insect Guard Anti-tamper sensor Test / Hush button LED operation indicator Low battery indicator Easy installation CE and EN 50291 certified

PMD2P Wireless PIR Motion Detector with Built-in Pet Immunity

PMD2P Introduction The Paradox PMD2P is an analog single-optic PIR motion detector with built-in pet immunity for use with Magellan wireless receivers/transceivers. The PMD2P is immune to animals weighing up to 18kg (40 pounds), and features automatic temperature compensation.

PMD2P Features Dual element sensor Immune to animals weighing up to 18 kg (40lb) Patented Auto Pulse Signal Processing Automatic Temperature Compensation Alive software (alarm LED continues to display when PIR is in energy save mode without compromising battery life) Dual tamper mechanism (wall/cover) Slide switch to select high or low sensitivity EN300-200 certified EN50131 certified

Thank You