 INCIDENT Electrical team along with painter was rigging down electrical cables in preparation to move. During the operation the painter lost his footing,

Slides:



Advertisements
Similar presentations
High Potential – Worker Injured While Resting Under the Vehicle
Advertisements

HSE LEARNING INCIDENT: CAUSES : LEARNINGS:
Follow the correct practice to secure the crane hook and block
Know your workplace hazards
Use hands off and avoid crush points
PDO Safety Advice What happened?
Isolate batteries before attempting to handle
INCIDENT: On 23rd July 2010 at about 7.40 AM, Birba (Transport subcontractor of SGEE) HD driver was descending down from the prime mover cabin after completing.
Injury: Fall from height
HSE LEARNINGS INCIDENT: Root Causes: LEARNING:
Never intervene to correct obstacles without stopping the activity
Key Learning: Look for the green tag before accessing a scaffold
Hand and Finger Injuries
INCIDENT: A 50 T crane was lifting pressure equipment skid (2.5 ton) from the wash bay area to wellhead equipment area. The crane was positioned in between.
LTI: Multiple fractures Always follow the Safe Journey Management Plan
Hip Fracture: Walking on the pipe
Always think to use hands off technique.
Trailer Wheel Came Off While Moving
 INCIDENT A Floorman and a Roustabout were applying torque on the polish rod before it could be fished out. A 36” pipe wrench was used for the purpose.
Always use the right means of access for working at heights jobs
Fatality, Ankle fracture, Chest pain and Neck Wounds
الدروس المستفادة في مجال الصحة والسلامة والبيئة
PDO Safety Advice Use this Alert: Discuss in Tool Box Talks and HSE Meetings  Distribute to contractors  Post on HSE Notice Boards  Include in site.
HSE LEARNING INCIDENT:
Avoid manual shifting of heavy materials
Check & avoid potential Pinch points
PDO Incident First Alert – NDSC
PDO Safety Advice What happened? Your learning from this incident..
LTI: Finger Crush Injury Hands off suspend loads “Use Tagline”
Always observe safe pedestrian zones
HSE LEARNING INCIDENT:
PDO safety advice Use this Alert: Discuss in Tool Box Talks and HSE Meetings  Distribute to contractors  Post on HSE Notice Boards  Include in site.
HSE LEARNING INCIDENT:
Fatality: Pedestrian Killed While Crossing Dual Carriageway
Always keep your fingers away from pinch points
Stay out of the “Line of Fire”
Strict adherence to the Commuting Policy
Driving in a dust cloud is like driving at night with no lights on
PDO safety advice Use this Alert: Discuss in Tool Box Talks and HSE Meetings  Distribute to contractors  Post on HSE Notice Boards  Include in site.
ELECTRICAL HAZARD HSE LEARNINGS Always use insulated tools while working on live electrical equipment Contact MSE511 for further information or visit HSE.
Ensure safety devices are working prior to starting work
 What Happened The crane outriggers were retracted in attempt to move the crane to another location. As the crane landed on its wheels it rolled backwards.
Seatbelts SAVE lives. INCIDENT
Fatality - RTA Rollover – Private Vehicle
Always watch out for the pinch points. Always use the handle provided.
  What Happened While trimming a piece of wood using electrical wood saw, the carpenter’s left hand came into contact with the saw blade resulting in.
HSE LEARNING INCIDENT:
HSE LEARNING INCIDENT: ROOT CAUSES: LEARNINGS:
Tubing hanger must always be assembled in horizontal position.
HSE LEARNING INCIDENT:
INCIDENT While picking up 3-1/2” D.P, a 2” drift was being used to drift pipe as it was raised up V-door room catwalk, 90 joints in total to be picked.
Be aware of potential pinch points
  HSE LEARNING INCIDENT:
INCIDENT On 26 November 2010 at about 0910H, a 1,500 gal. cap. fuel tanker belonging to BIS (IECC subcontractor) was approaching a curve section of Fahud.
  HSE LEARNINGS INCIDENT: Root Causes: LEARNINGS:
PDO Safety Advice Date: 23/08/2015 Injury: Fractured fingers
HSE LEARNINGS INCIDENT: Root Causes: LEARNINGS:
INCIDENT While picking up 3-1/2” D.P, a 2” drift was being used to drift pipe as it was raised up V-door room catwalk, 90 joints in total to be picked.
HSE LEARNING INCIDENT:
  Key Learning: Ensure all grooves / ditches are covered or filled
HSE LEARNING INCIDENT: Crew were loading pipe bundles with a Hiab in
INCIDENT: One of HD driver in NCP crew wanted to move Mitsubishi canter from the well site after offloading drinking water. When he started the engine.
Key Learning: Wrong Way Correct Way Follow the signposted speed limits
Use the correct lifting device for the load
 HSE LEARNING INCIDENT: CAUSES: LEARNINGS:
Only perform tasks under your responsibility
√ X HSE LEARNINGS INCIDENT: Root Causes: LEARNING:
HSE LEARNING INCIDENT: CAUSES:
Falling From Height – Broken Arm
Apply 3 point contact while ascending/ descending for proper stability
Presentation transcript:

 INCIDENT Electrical team along with painter was rigging down electrical cables in preparation to move. During the operation the painter lost his footing, slipped and his right knee struck the cable tray resulting in a undisplaced fracture on the right patella. ROOT CAUSES: Lack of Due Care and Attention: Each employee is responsible for his/her own safety Inadequate Supervision: Inadequate identification of loss exposure Improper Motivation: Worker was on his last day of a very long hitch Lateral Learning Everyone is accountable for their own safety Simple routine tasks should not be underestimated. Stand back 5x5 for all conditions, think before you act. Keep your work place tidy and watch out your step Recommended Actions: Discuss this alert in toolbox talks and HSE meetings and Distribute to all contractors Post on HSE notice boards Include in site HSE induction Key Learning: Keep your work place tidy and avoid working on slippery surfaces. Slip: Leg Injuries Contact MSE511 for further information or visit HSE website LTI No. 64/2010 Alert No 37 January, 2011